source: non-gtk/mailman/bg/bg.po@ 1112

# Bulgarian translation for GNU MailMan 2.1.8
# Copyright (C) 2004, 2005, 2006 Free Software Foundation, Inc.
# Alexander Shopov <ash@contact.bg>, 2004, 2005, 2006.
#
msgid ""
msgstr ""
"Project-Id-Version: GNU MailMan 2.1.8\n"
"POT-Creation-Date: Thu Mar 23 16:59:29 2006\n"
"PO-Revision-Date: 2006-05-14 21:03+0300\n"
"Last-Translator: Alexander Shopov <ash@contact.bg>\n"
"Language-Team: Bulgarian <dict@fsa-bg.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: pygettext.py 1.4\n"
"Plural-Forms: nplurals=2; plural=n != 1;\n"

#: Mailman/Archiver/HyperArch.py:123
msgid "size not available"
msgstr "Рамерът не е наличен"

#: Mailman/Archiver/HyperArch.py:129
msgid " %(size)i bytes "
msgstr " %(size)i байта "

#: Mailman/Archiver/HyperArch.py:284 Mailman/Archiver/HyperArch.py:287
#: Mailman/Archiver/HyperArch.py:415 Mailman/Archiver/HyperArch.py:467
#: Mailman/Archiver/HyperArch.py:575 Mailman/Archiver/HyperArch.py:1049
#: Mailman/Archiver/HyperArch.py:1178
msgid " at "
msgstr " на "

#: Mailman/Archiver/HyperArch.py:496
msgid "Previous message:"
msgstr "Предходно писмо:"

#: Mailman/Archiver/HyperArch.py:518
msgid "Next message:"
msgstr "Следващо писмо:"

#: Mailman/Archiver/HyperArch.py:690 Mailman/Archiver/HyperArch.py:726
msgid "thread"
msgstr "нишка"

#: Mailman/Archiver/HyperArch.py:691 Mailman/Archiver/HyperArch.py:727
msgid "subject"
msgstr "тема"

#: Mailman/Archiver/HyperArch.py:692 Mailman/Archiver/HyperArch.py:728
msgid "author"
msgstr "автор"

#: Mailman/Archiver/HyperArch.py:693 Mailman/Archiver/HyperArch.py:729
msgid "date"
msgstr "дата"

#: Mailman/Archiver/HyperArch.py:765
msgid "<P>Currently, there are no archives. </P>"
msgstr "<P>В момента няма архиви. </P>"

#: Mailman/Archiver/HyperArch.py:803
msgid "Gzip'd Text%(sz)s"
msgstr "Текст, компресиран с gzip - %(sz)s"

#: Mailman/Archiver/HyperArch.py:808
msgid "Text%(sz)s"
msgstr "Текст - %(sz)s"

#: Mailman/Archiver/HyperArch.py:898
#, fuzzy
msgid "figuring article archives\n"
msgstr "обработват се архивите на статиите\n"

#: Mailman/Archiver/HyperArch.py:908
msgid "April"
msgstr "Април"

#: Mailman/Archiver/HyperArch.py:908
msgid "February"
msgstr "Февруари"

#: Mailman/Archiver/HyperArch.py:908
msgid "January"
msgstr "Януари"

#: Mailman/Archiver/HyperArch.py:908
msgid "March"
msgstr "Март"

#: Mailman/Archiver/HyperArch.py:909
msgid "August"
msgstr "Август"

#: Mailman/Archiver/HyperArch.py:909
msgid "July"
msgstr "Юли"

#: Mailman/Archiver/HyperArch.py:909
msgid "June"
msgstr "Юни"

#: Mailman/Archiver/HyperArch.py:909 Mailman/i18n.py:103
msgid "May"
msgstr "Май"

#: Mailman/Archiver/HyperArch.py:910
msgid "December"
msgstr "Декември"

#: Mailman/Archiver/HyperArch.py:910
msgid "November"
msgstr "Ноември"

#: Mailman/Archiver/HyperArch.py:910
msgid "October"
msgstr "Октомври"

#: Mailman/Archiver/HyperArch.py:910
msgid "September"
msgstr "Септември"

#: Mailman/Archiver/HyperArch.py:918
msgid "First"
msgstr "Първо"

#: Mailman/Archiver/HyperArch.py:918
msgid "Fourth"
msgstr "Четвърто"

#: Mailman/Archiver/HyperArch.py:918
msgid "Second"
msgstr "Второ"

#: Mailman/Archiver/HyperArch.py:918
msgid "Third"
msgstr "Трето"

#: Mailman/Archiver/HyperArch.py:920
msgid "%(ord)s quarter %(year)i"
msgstr "%(ord)s тримесечие %(year)i"

#: Mailman/Archiver/HyperArch.py:927
msgid "%(month)s %(year)i"
msgstr "%(month)s %(year)i"

#: Mailman/Archiver/HyperArch.py:932
msgid "The Week Of Monday %(day)i %(month)s %(year)i"
msgstr "Седмицата започваща с понеделник, %(day)i %(month)s %(year)i"

#: Mailman/Archiver/HyperArch.py:936
msgid "%(day)i %(month)s %(year)i"
msgstr "%(day)i %(month)s %(year)i"

#: Mailman/Archiver/HyperArch.py:1036
msgid "Computing threaded index\n"
msgstr "В момента се генерира индекса по нишки\n"

#: Mailman/Archiver/HyperArch.py:1301
msgid "Updating HTML for article %(seq)s"
msgstr "В момента се обновява кода с HTML за статията %(seq)s"

#: Mailman/Archiver/HyperArch.py:1308
msgid "article file %(filename)s is missing!"
msgstr "файлът за статията - %(filename)s липсва!"

#: Mailman/Archiver/pipermail.py:179 Mailman/Archiver/pipermail.py:180
msgid "No subject"
msgstr "Без тема"

#: Mailman/Archiver/pipermail.py:287
msgid "Creating archive directory "
msgstr "В момента се създава директорията за архивите"

#: Mailman/Archiver/pipermail.py:299
msgid "Reloading pickled archive state"
msgstr "В момента се презарежда състоянието на архивите"

#: Mailman/Archiver/pipermail.py:326
msgid "Pickling archive state into "
msgstr "Състоянието на архивите се записва в "

#: Mailman/Archiver/pipermail.py:437
msgid "Updating index files for archive [%(archive)s]"
msgstr "В момента се обновяват файловете с индекси за архива [%(archive)s]"

#: Mailman/Archiver/pipermail.py:470
msgid "  Thread"
msgstr "  Нишка"

#: Mailman/Archiver/pipermail.py:577
msgid "#%(counter)05d %(msgid)s"
msgstr "#%(counter)05d %(msgid)s"

#: Mailman/Bouncer.py:44
msgid "due to excessive bounces"
msgstr ""

#: Mailman/Bouncer.py:45
msgid "by yourself"
msgstr ""

#: Mailman/Bouncer.py:46
msgid "by the list administrator"
msgstr ""

#: Mailman/Bouncer.py:47 Mailman/Bouncer.py:247
#: Mailman/Commands/cmd_set.py:182
msgid "for unknown reasons"
msgstr "поради неясни причини"

#: Mailman/Bouncer.py:194
msgid "disabled"
msgstr ""

#: Mailman/Bouncer.py:199
msgid "Bounce action notification"
msgstr ""

#: Mailman/Bouncer.py:254
msgid " The last bounce received from you was dated %(date)s"
msgstr ""

#: Mailman/Bouncer.py:279 Mailman/Deliverer.py:145
#: Mailman/Handlers/Acknowledge.py:44 Mailman/Handlers/CookHeaders.py:285
#: Mailman/Handlers/Hold.py:209 Mailman/Handlers/ToDigest.py:235
#: Mailman/ListAdmin.py:223
msgid "(no subject)"
msgstr "(без тема)"

#: Mailman/Bouncer.py:283
msgid "[No bounce details are available]"
msgstr ""

#: Mailman/Cgi/Auth.py:46
msgid "Moderator"
msgstr ""

#: Mailman/Cgi/Auth.py:48
msgid "Administrator"
msgstr "Ръководител"

#: Mailman/Cgi/admin.py:75 Mailman/Cgi/admindb.py:90 Mailman/Cgi/confirm.py:62
#: Mailman/Cgi/edithtml.py:70 Mailman/Cgi/listinfo.py:51
#: Mailman/Cgi/options.py:78 Mailman/Cgi/private.py:108
#: Mailman/Cgi/rmlist.py:64 Mailman/Cgi/roster.py:57
#: Mailman/Cgi/subscribe.py:61
msgid "No such list <em>%(safelistname)s</em>"
msgstr "Няма такъв списък - <em>%(safelistname)s</em>"

#: Mailman/Cgi/admin.py:90 Mailman/Cgi/admindb.py:106
#: Mailman/Cgi/edithtml.py:88 Mailman/Cgi/private.py:133
msgid "Authorization failed."
msgstr "Неуспешно упълномощаване."

#: Mailman/Cgi/admin.py:180
msgid ""
"You have turned off delivery of both digest and\n"
"                non-digest messages.  This is an incompatible state of\n"
"                affairs.  You must turn on either digest delivery or\n"
"                non-digest delivery or your mailing list will basically be\n"
"                unusable."
msgstr ""
"Изключили сте както режима на резюмета, така и\n"
"                нормалното получаване на поща.  Това положение\n"
"                е некоректно - трябва да позволите поне единия\n"
"                начин на пращане на съобщения - на резюмета или\n"
"                не.  В противен случай пощенският Ви списък ще\n"
"                бъде практически неизползваем."

#: Mailman/Cgi/admin.py:184 Mailman/Cgi/admin.py:190 Mailman/Cgi/admin.py:195
#: Mailman/Cgi/admin.py:1437 Mailman/Gui/GUIBase.py:191
msgid "Warning: "
msgstr "Предупреждение:"

#: Mailman/Cgi/admin.py:188
msgid ""
"You have digest members, but digests are turned\n"
"                off. Those people will not receive mail."
msgstr ""
"Има хора, които са се абонирали за спиъка и които\n"
"                използват режима на резюмета, а Вие сте го\n"
"                изключили.  Посочените хора няма да получават поща."

#: Mailman/Cgi/admin.py:193
msgid ""
"You have regular list members but non-digestified mail is\n"
"                turned off.  They will receive mail until you fix this\n"
"                problem."
msgstr ""
"Има хора, които са се абонирали за списъка и които не\n"
"                използват режима на резюмета, а за наличен Вие сте дали\n"
"                само режима на резюмета.  Посочените хора ще получават\n"
"                поща докато не отстраните този проблем."

#: Mailman/Cgi/admin.py:217
msgid "%(hostname)s mailing lists - Admin Links"
msgstr "Пощенските списъци на %(hostname)s - връзки за ръководители"

#: Mailman/Cgi/admin.py:247 Mailman/Cgi/listinfo.py:100
msgid "Welcome!"
msgstr "Здравейте!"

#: Mailman/Cgi/admin.py:250 Mailman/Cgi/listinfo.py:103
msgid "Mailman"
msgstr "Mailman"

#: Mailman/Cgi/admin.py:254
msgid ""
"<p>There currently are no publicly-advertised %(mailmanlink)s\n"
"            mailing lists on %(hostname)s."
msgstr ""
"<p>В момента на %(hostname)s няма никакви публично оповестени\n"
"             пощенски списъци работещи с %(mailmanlink)s ."

#: Mailman/Cgi/admin.py:260
msgid ""
"<p>Below is the collection of publicly-advertised\n"
"            %(mailmanlink)s mailing lists on %(hostname)s.  Click on a list\n"
"            name to visit the configuration pages for that list."
msgstr ""

#: Mailman/Cgi/admin.py:267
msgid "right "
msgstr "отдясно"

#: Mailman/Cgi/admin.py:269
msgid ""
"To visit the administrators configuration page for an\n"
"        unadvertised list, open a URL similar to this one, but with a '/' "
"and\n"
"        the %(extra)slist name appended.  If you have the proper authority,\n"
"        you can also <a href=\"%(creatorurl)s\">create a new mailing list</"
"a>.\n"
"\n"
"        <p>General list information can be found at "
msgstr ""

#: Mailman/Cgi/admin.py:276
msgid "the mailing list overview page"
msgstr ""

#: Mailman/Cgi/admin.py:278
msgid "<p>(Send questions and comments to "
msgstr "<p>(Пращайте въпроси и коментари на "

#: Mailman/Cgi/admin.py:288 Mailman/Cgi/listinfo.py:135 cron/mailpasswds:216
msgid "List"
msgstr "Списък"

#: Mailman/Cgi/admin.py:289 Mailman/Cgi/admin.py:555
#: Mailman/Cgi/listinfo.py:136
msgid "Description"
msgstr "Описание"

#: Mailman/Cgi/admin.py:295 Mailman/Cgi/listinfo.py:142 bin/list_lists:116
msgid "[no description available]"
msgstr "[липсва описание]"

#: Mailman/Cgi/admin.py:328
msgid "No valid variable name found."
msgstr "Не е намерено валидно име на променлива."

#: Mailman/Cgi/admin.py:338
msgid ""
"%(realname)s Mailing list Configuration Help\n"
"    <br><em>%(varname)s</em> Option"
msgstr ""

#: Mailman/Cgi/admin.py:345
msgid "Mailman %(varname)s List Option Help"
msgstr ""

#: Mailman/Cgi/admin.py:363
msgid ""
"<em><strong>Warning:</strong> changing this option here\n"
"    could cause other screens to be out-of-sync.  Be sure to reload any "
"other\n"
"    pages that are displaying this option for this mailing list.  You can "
"also\n"
"    "
msgstr ""

#: Mailman/Cgi/admin.py:374
msgid "return to the %(categoryname)s options page."
msgstr ""

#: Mailman/Cgi/admin.py:389
msgid "%(realname)s Administration (%(label)s)"
msgstr ""

#: Mailman/Cgi/admin.py:390
msgid "%(realname)s mailing list administration<br>%(label)s Section"
msgstr ""

#: Mailman/Cgi/admin.py:406
msgid "Configuration Categories"
msgstr ""

#: Mailman/Cgi/admin.py:407
msgid "Other Administrative Activities"
msgstr ""

#: Mailman/Cgi/admin.py:411
msgid "Tend to pending moderator requests"
msgstr ""

#: Mailman/Cgi/admin.py:413
msgid "Go to the general list information page"
msgstr ""

#: Mailman/Cgi/admin.py:415
msgid "Edit the public HTML pages and text files"
msgstr ""

#: Mailman/Cgi/admin.py:417
msgid "Go to list archives"
msgstr "Отиване при архивите на списъците"

#: Mailman/Cgi/admin.py:423
msgid "Delete this mailing list"
msgstr "Изтриване на този пощенски списък"

#: Mailman/Cgi/admin.py:424
msgid " (requires confirmation)<br>&nbsp;<br>"
msgstr " (изисква потвърждение)<br>&nbsp;<br>"

#: Mailman/Cgi/admin.py:430
msgid "Logout"
msgstr "Изход"

#: Mailman/Cgi/admin.py:474
msgid "Emergency moderation of all list traffic is enabled"
msgstr ""

#: Mailman/Cgi/admin.py:485
msgid ""
"Make your changes in the following section, then submit them\n"
"        using the <em>Submit Your Changes</em> button below."
msgstr ""

#: Mailman/Cgi/admin.py:503
msgid "Additional Member Tasks"
msgstr ""

#: Mailman/Cgi/admin.py:509
msgid ""
"<li>Set everyone's moderation bit, including\n"
"            those members not currently visible"
msgstr ""

#: Mailman/Cgi/admin.py:513
msgid "Off"
msgstr ""

#: Mailman/Cgi/admin.py:513
msgid "On"
msgstr ""

#: Mailman/Cgi/admin.py:515
msgid "Set"
msgstr ""

#: Mailman/Cgi/admin.py:556
msgid "Value"
msgstr ""

#: Mailman/Cgi/admin.py:610
msgid ""
"Badly formed options entry:\n"
" %(record)s"
msgstr ""

#: Mailman/Cgi/admin.py:668
msgid "<em>Enter the text below, or...</em><br>"
msgstr ""

#: Mailman/Cgi/admin.py:670
msgid "<br><em>...specify a file to upload</em><br>"
msgstr ""

#: Mailman/Cgi/admin.py:696 Mailman/Cgi/admin.py:699
msgid "Topic %(i)d"
msgstr ""

#: Mailman/Cgi/admin.py:700 Mailman/Cgi/admin.py:750
msgid "Delete"
msgstr "Изтрване"

#: Mailman/Cgi/admin.py:701
msgid "Topic name:"
msgstr "Име на темата:"

#: Mailman/Cgi/admin.py:703
msgid "Regexp:"
msgstr "Регулярен израз:"

#: Mailman/Cgi/admin.py:706 Mailman/Cgi/options.py:1029
msgid "Description:"
msgstr "Описание:"

#: Mailman/Cgi/admin.py:710 Mailman/Cgi/admin.py:768
msgid "Add new item..."
msgstr "Добавяне на нов елемент..."

#: Mailman/Cgi/admin.py:712 Mailman/Cgi/admin.py:770
msgid "...before this one."
msgstr "...преди този."

#: Mailman/Cgi/admin.py:713 Mailman/Cgi/admin.py:771
msgid "...after this one."
msgstr "...след този."

#: Mailman/Cgi/admin.py:746 Mailman/Cgi/admin.py:749
msgid "Spam Filter Rule %(i)d"
msgstr ""

#: Mailman/Cgi/admin.py:751
msgid "Spam Filter Regexp:"
msgstr ""

#: Mailman/Cgi/admin.py:762 Mailman/Cgi/admindb.py:302
#: Mailman/Cgi/admindb.py:361 Mailman/Cgi/admindb.py:404
#: Mailman/Cgi/admindb.py:638
msgid "Defer"
msgstr ""

#: Mailman/Cgi/admin.py:762 Mailman/Cgi/admindb.py:304
#: Mailman/Cgi/admindb.py:363 Mailman/Cgi/admindb.py:404
#: Mailman/Cgi/admindb.py:638 Mailman/Gui/ContentFilter.py:37
#: Mailman/Gui/Privacy.py:216 Mailman/Gui/Privacy.py:290
msgid "Reject"
msgstr ""

#: Mailman/Cgi/admin.py:762 Mailman/Gui/Privacy.py:216
#: Mailman/Gui/Privacy.py:290
msgid "Hold"
msgstr ""

#: Mailman/Cgi/admin.py:763 Mailman/Cgi/admindb.py:305
#: Mailman/Cgi/admindb.py:364 Mailman/Cgi/admindb.py:404
#: Mailman/Cgi/admindb.py:638 Mailman/Gui/ContentFilter.py:37
#: Mailman/Gui/Privacy.py:216 Mailman/Gui/Privacy.py:290
msgid "Discard"
msgstr ""

#: Mailman/Cgi/admin.py:763 Mailman/Cgi/admindb.py:404
#: Mailman/Gui/Privacy.py:290
msgid "Accept"
msgstr ""

#: Mailman/Cgi/admin.py:766 Mailman/Cgi/admindb.py:644
msgid "Action:"
msgstr "Действие:"

#: Mailman/Cgi/admin.py:778
msgid "Move rule up"
msgstr "Преместване на правилото нагоре"

#: Mailman/Cgi/admin.py:779
msgid "Move rule down"
msgstr "Преместване на правилото надолу"

#: Mailman/Cgi/admin.py:812
msgid "<br>(Edit <b>%(varname)s</b>)"
msgstr "<br>(Редактиране на <b>%(varname)s</b>)"

#: Mailman/Cgi/admin.py:814
msgid "<br>(Details for <b>%(varname)s</b>)"
msgstr ""

#: Mailman/Cgi/admin.py:821
msgid ""
"<br><em><strong>Note:</strong>\n"
"        setting this value performs an immediate action but does not modify\n"
"        permanent state.</em>"
msgstr ""

#: Mailman/Cgi/admin.py:835
msgid "Mass Subscriptions"
msgstr "Масово абониране"

#: Mailman/Cgi/admin.py:842
msgid "Mass Removals"
msgstr "Масово прекратяване на абонамента"

#: Mailman/Cgi/admin.py:849
msgid "Membership List"
msgstr ""

#: Mailman/Cgi/admin.py:856
msgid "(help)"
msgstr "(помощ)"

#: Mailman/Cgi/admin.py:857
msgid "Find member %(link)s:"
msgstr "Търсене на абонат %(link)s:"

#: Mailman/Cgi/admin.py:860
msgid "Search..."
msgstr "Търсене..."

#: Mailman/Cgi/admin.py:877
msgid "Bad regular expression: "
msgstr "Неправилен регулярен израз: "

#: Mailman/Cgi/admin.py:933
msgid "%(allcnt)s members total, %(membercnt)s shown"
msgstr "Общо %(allcnt)s абонати, показани са %(membercnt)s"

#: Mailman/Cgi/admin.py:936
msgid "%(allcnt)s members total"
msgstr "общо %(allcnt)s абонати"

#: Mailman/Cgi/admin.py:959
msgid "unsub"
msgstr "прекр. абон."

#: Mailman/Cgi/admin.py:960
msgid "member address<br>member name"
msgstr ""

#: Mailman/Cgi/admin.py:961
msgid "hide"
msgstr "скриване"

#: Mailman/Cgi/admin.py:961
msgid "mod"
msgstr ""

#: Mailman/Cgi/admin.py:962
msgid "nomail<br>[reason]"
msgstr ""

#: Mailman/Cgi/admin.py:963
msgid "ack"
msgstr ""

#: Mailman/Cgi/admin.py:963
msgid "not metoo"
msgstr ""

#: Mailman/Cgi/admin.py:964
msgid "nodupes"
msgstr ""

#: Mailman/Cgi/admin.py:965
msgid "digest"
msgstr ""

#: Mailman/Cgi/admin.py:965
msgid "plain"
msgstr ""

#: Mailman/Cgi/admin.py:966
msgid "language"
msgstr ""

#: Mailman/Cgi/admin.py:977
msgid "?"
msgstr ""

#: Mailman/Cgi/admin.py:978
msgid "U"
msgstr ""

#: Mailman/Cgi/admin.py:979
msgid "A"
msgstr ""

#: Mailman/Cgi/admin.py:980
msgid "B"
msgstr ""

#: Mailman/Cgi/admin.py:1051
msgid "<b>unsub</b> -- Click on this to unsubscribe the member."
msgstr ""

#: Mailman/Cgi/admin.py:1053
msgid ""
"<b>mod</b> -- The user's personal moderation flag.  If this is\n"
"        set, postings from them will be moderated, otherwise they will be\n"
"        approved."
msgstr ""

#: Mailman/Cgi/admin.py:1057
msgid ""
"<b>hide</b> -- Is the member's address concealed on\n"
"        the list of subscribers?"
msgstr ""

#: Mailman/Cgi/admin.py:1059
msgid ""
"<b>nomail</b> -- Is delivery to the member disabled?  If so, an\n"
"        abbreviation will be given describing the reason for the disabled\n"
"        delivery:\n"
"            <ul><li><b>U</b> -- Delivery was disabled by the user via their\n"
"                    personal options page.\n"
"                <li><b>A</b> -- Delivery was disabled by the list\n"
"                    administrators.\n"
"                <li><b>B</b> -- Delivery was disabled by the system due to\n"
"                    excessive bouncing from the member's address.\n"
"                <li><b>?</b> -- The reason for disabled delivery isn't "
"known.\n"
"                    This is the case for all memberships which were "
"disabled\n"
"                    in older versions of Mailman.\n"
"            </ul>"
msgstr ""

#: Mailman/Cgi/admin.py:1074
msgid ""
"<b>ack</b> -- Does the member get acknowledgements of their\n"
"        posts?"
msgstr ""

#: Mailman/Cgi/admin.py:1077
msgid ""
"<b>not metoo</b> -- Does the member want to avoid copies of their\n"
"        own postings?"
msgstr ""

#: Mailman/Cgi/admin.py:1080
msgid ""
"<b>nodupes</b> -- Does the member want to avoid duplicates of the\n"
"        same message?"
msgstr ""

#: Mailman/Cgi/admin.py:1083
msgid ""
"<b>digest</b> -- Does the member get messages in digests?\n"
"        (otherwise, individual messages)"
msgstr ""

#: Mailman/Cgi/admin.py:1086
msgid ""
"<b>plain</b> -- If getting digests, does the member get plain\n"
"        text digests?  (otherwise, MIME)"
msgstr ""

#: Mailman/Cgi/admin.py:1088
msgid "<b>language</b> -- Language preferred by the user"
msgstr ""

#: Mailman/Cgi/admin.py:1102
msgid "Click here to hide the legend for this table."
msgstr ""

#: Mailman/Cgi/admin.py:1106
msgid "Click here to include the legend for this table."
msgstr ""

#: Mailman/Cgi/admin.py:1113
msgid ""
"<p><em>To view more members, click on the appropriate\n"
"        range listed below:</em>"
msgstr ""

#: Mailman/Cgi/admin.py:1122
msgid "from %(start)s to %(end)s"
msgstr ""

#: Mailman/Cgi/admin.py:1135
msgid "Subscribe these users now or invite them?"
msgstr ""

#: Mailman/Cgi/admin.py:1137
msgid "Invite"
msgstr ""

#: Mailman/Cgi/admin.py:1137 Mailman/Cgi/listinfo.py:178
msgid "Subscribe"
msgstr ""

#: Mailman/Cgi/admin.py:1143
msgid "Send welcome messages to new subscribees?"
msgstr ""

#: Mailman/Cgi/admin.py:1145 Mailman/Cgi/admin.py:1154
#: Mailman/Cgi/admin.py:1187 Mailman/Cgi/admin.py:1195
#: Mailman/Cgi/confirm.py:290 Mailman/Cgi/create.py:341
#: Mailman/Cgi/create.py:376 Mailman/Cgi/create.py:414
#: Mailman/Cgi/rmlist.py:228 Mailman/Gui/Archive.py:33
#: Mailman/Gui/Autoresponse.py:54 Mailman/Gui/Autoresponse.py:62
#: Mailman/Gui/Autoresponse.py:71 Mailman/Gui/Bounce.py:77
#: Mailman/Gui/Bounce.py:120 Mailman/Gui/Bounce.py:146
#: Mailman/Gui/Bounce.py:155 Mailman/Gui/ContentFilter.py:74
#: Mailman/Gui/ContentFilter.py:116 Mailman/Gui/ContentFilter.py:120
#: Mailman/Gui/Digest.py:46 Mailman/Gui/Digest.py:62 Mailman/Gui/Digest.py:84
#: Mailman/Gui/Digest.py:89 Mailman/Gui/General.py:153
#: Mailman/Gui/General.py:159 Mailman/Gui/General.py:237
#: Mailman/Gui/General.py:264 Mailman/Gui/General.py:291
#: Mailman/Gui/General.py:302 Mailman/Gui/General.py:305
#: Mailman/Gui/General.py:315 Mailman/Gui/General.py:320
#: Mailman/Gui/General.py:326 Mailman/Gui/General.py:346
#: Mailman/Gui/General.py:374 Mailman/Gui/General.py:397
#: Mailman/Gui/NonDigest.py:44 Mailman/Gui/NonDigest.py:52
#: Mailman/Gui/NonDigest.py:139 Mailman/Gui/Privacy.py:110
#: Mailman/Gui/Privacy.py:116 Mailman/Gui/Privacy.py:149
#: Mailman/Gui/Privacy.py:197 Mailman/Gui/Privacy.py:305
#: Mailman/Gui/Privacy.py:324 Mailman/Gui/Usenet.py:52
#: Mailman/Gui/Usenet.py:56 Mailman/Gui/Usenet.py:93 Mailman/Gui/Usenet.py:105
msgid "No"
msgstr "Не"

#: Mailman/Cgi/admin.py:1145 Mailman/Cgi/admin.py:1154
#: Mailman/Cgi/admin.py:1187 Mailman/Cgi/admin.py:1195
#: Mailman/Cgi/confirm.py:290 Mailman/Cgi/create.py:341
#: Mailman/Cgi/create.py:376 Mailman/Cgi/create.py:414
#: Mailman/Cgi/rmlist.py:228 Mailman/Gui/Archive.py:33
#: Mailman/Gui/Autoresponse.py:54 Mailman/Gui/Autoresponse.py:62
#: Mailman/Gui/Bounce.py:77 Mailman/Gui/Bounce.py:120
#: Mailman/Gui/Bounce.py:146 Mailman/Gui/Bounce.py:155
#: Mailman/Gui/ContentFilter.py:74 Mailman/Gui/ContentFilter.py:116
#: Mailman/Gui/ContentFilter.py:120 Mailman/Gui/Digest.py:46
#: Mailman/Gui/Digest.py:62 Mailman/Gui/Digest.py:84 Mailman/Gui/Digest.py:89
#: Mailman/Gui/General.py:153 Mailman/Gui/General.py:159
#: Mailman/Gui/General.py:237 Mailman/Gui/General.py:264
#: Mailman/Gui/General.py:291 Mailman/Gui/General.py:302
#: Mailman/Gui/General.py:305 Mailman/Gui/General.py:315
#: Mailman/Gui/General.py:320 Mailman/Gui/General.py:326
#: Mailman/Gui/General.py:346 Mailman/Gui/General.py:374
#: Mailman/Gui/General.py:397 Mailman/Gui/NonDigest.py:44
#: Mailman/Gui/NonDigest.py:52 Mailman/Gui/NonDigest.py:139
#: Mailman/Gui/Privacy.py:110 Mailman/Gui/Privacy.py:116
#: Mailman/Gui/Privacy.py:149 Mailman/Gui/Privacy.py:197
#: Mailman/Gui/Privacy.py:305 Mailman/Gui/Privacy.py:324
#: Mailman/Gui/Usenet.py:52 Mailman/Gui/Usenet.py:56 Mailman/Gui/Usenet.py:93
#: Mailman/Gui/Usenet.py:105
msgid "Yes"
msgstr "Да"

#: Mailman/Cgi/admin.py:1152
msgid "Send notifications of new subscriptions to the list owner?"
msgstr ""

#: Mailman/Cgi/admin.py:1160 Mailman/Cgi/admin.py:1201
msgid "Enter one address per line below..."
msgstr ""

#: Mailman/Cgi/admin.py:1165 Mailman/Cgi/admin.py:1206
msgid "...or specify a file to upload:"
msgstr ""

#: Mailman/Cgi/admin.py:1170
msgid ""
"Below, enter additional text to be added to the\n"
"    top of your invitation or the subscription notification.  Include at "
"least\n"
"    one blank line at the end..."
msgstr ""

#: Mailman/Cgi/admin.py:1185
msgid "Send unsubscription acknowledgement to the user?"
msgstr ""

#: Mailman/Cgi/admin.py:1193
msgid "Send notifications to the list owner?"
msgstr ""

#: Mailman/Cgi/admin.py:1215
msgid "Change list ownership passwords"
msgstr ""

#: Mailman/Cgi/admin.py:1218
msgid ""
"The <em>list administrators</em> are the people who have ultimate control "
"over\n"
"all parameters of this mailing list.  They are able to change any list\n"
"configuration variable available through these administration web pages.\n"
"\n"
"<p>The <em>list moderators</em> have more limited permissions; they are not\n"
"able to change any list configuration variable, but they are allowed to "
"tend\n"
"to pending administration requests, including approving or rejecting held\n"
"subscription requests, and disposing of held postings.  Of course, the\n"
"<em>list administrators</em> can also tend to pending requests.\n"
"\n"
"<p>In order to split the list ownership duties into administrators and\n"
"moderators, you must set a separate moderator password in the fields below,\n"
"and also provide the email addresses of the list moderators in the\n"
"<a href=\"%(adminurl)s/general\">general options section</a>."
msgstr ""

#: Mailman/Cgi/admin.py:1237
msgid "Enter new administrator password:"
msgstr ""

#: Mailman/Cgi/admin.py:1239
msgid "Confirm administrator password:"
msgstr ""

#: Mailman/Cgi/admin.py:1244
msgid "Enter new moderator password:"
msgstr ""

#: Mailman/Cgi/admin.py:1246
msgid "Confirm moderator password:"
msgstr ""

#: Mailman/Cgi/admin.py:1256
msgid "Submit Your Changes"
msgstr ""

#: Mailman/Cgi/admin.py:1279
msgid "Moderator passwords did not match"
msgstr ""

#: Mailman/Cgi/admin.py:1289
msgid "Administrator passwords did not match"
msgstr ""

#: Mailman/Cgi/admin.py:1338
msgid "Already a member"
msgstr "Вече е абониран"

#: Mailman/Cgi/admin.py:1341
msgid "&lt;blank line&gt;"
msgstr "&lt;празен ред&gt;"

#: Mailman/Cgi/admin.py:1342 Mailman/Cgi/admin.py:1345
msgid "Bad/Invalid email address"
msgstr "Неправилен адрес на е-поща"

#: Mailman/Cgi/admin.py:1348
msgid "Hostile address (illegal characters)"
msgstr "Лош адрес (съдържа забранени символи)"

#: Mailman/Cgi/admin.py:1351
msgid "Banned address (matched %(pattern)s)"
msgstr ""

#: Mailman/Cgi/admin.py:1357
msgid "Successfully invited:"
msgstr "Успешно поканен:"

#: Mailman/Cgi/admin.py:1359
msgid "Successfully subscribed:"
msgstr "Успешно абониран:"

#: Mailman/Cgi/admin.py:1364
msgid "Error inviting:"
msgstr "Грешка при поканването на:"

#: Mailman/Cgi/admin.py:1366
msgid "Error subscribing:"
msgstr "Грешка при абонирането на:"

#: Mailman/Cgi/admin.py:1395
msgid "Successfully Unsubscribed:"
msgstr "Успешно прекратен абонамент:"

#: Mailman/Cgi/admin.py:1400
msgid "Cannot unsubscribe non-members:"
msgstr "Не може да се прекрати абонамента, на тези, които не са абонирани:"

#: Mailman/Cgi/admin.py:1412
msgid "Bad moderation flag value"
msgstr ""

#: Mailman/Cgi/admin.py:1433
msgid "Not subscribed"
msgstr "Не е абониран"

#: Mailman/Cgi/admin.py:1436
msgid "Ignoring changes to deleted member: %(user)s"
msgstr ""

#: Mailman/Cgi/admin.py:1476
msgid "Successfully Removed:"
msgstr "Успешно прекратен абонамент на:"

#: Mailman/Cgi/admin.py:1480
msgid "Error Unsubscribing:"
msgstr "Грешка при прекратяването на абонамента на:"

#: Mailman/Cgi/admindb.py:160 Mailman/Cgi/admindb.py:168
msgid "%(realname)s Administrative Database"
msgstr ""

#: Mailman/Cgi/admindb.py:163
msgid "%(realname)s Administrative Database Results"
msgstr ""

#: Mailman/Cgi/admindb.py:171
msgid "There are no pending requests."
msgstr ""

#: Mailman/Cgi/admindb.py:174
msgid "Click here to reload this page."
msgstr ""

#: Mailman/Cgi/admindb.py:185
msgid "Detailed instructions for the administrative database"
msgstr ""

#: Mailman/Cgi/admindb.py:189
msgid "Administrative requests for mailing list:"
msgstr ""

#: Mailman/Cgi/admindb.py:192 Mailman/Cgi/admindb.py:247
msgid "Submit All Data"
msgstr "Подаване на всички данни"

#: Mailman/Cgi/admindb.py:197 Mailman/Cgi/admindb.py:245
msgid "Discard all messages marked <em>Defer</em>"
msgstr ""

#: Mailman/Cgi/admindb.py:211
msgid "all of %(esender)s's held messages."
msgstr ""

#: Mailman/Cgi/admindb.py:216
msgid "a single held message."
msgstr ""

#: Mailman/Cgi/admindb.py:221
msgid "all held messages."
msgstr ""

#: Mailman/Cgi/admindb.py:262
msgid "Mailman Administrative Database Error"
msgstr ""

#: Mailman/Cgi/admindb.py:267
msgid "list of available mailing lists."
msgstr ""

#: Mailman/Cgi/admindb.py:268
msgid "You must specify a list name.  Here is the %(link)s"
msgstr ""

#: Mailman/Cgi/admindb.py:281
msgid "Subscription Requests"
msgstr ""

#: Mailman/Cgi/admindb.py:283
msgid "Address/name"
msgstr ""

#: Mailman/Cgi/admindb.py:284 Mailman/Cgi/admindb.py:335
msgid "Your decision"
msgstr ""

#: Mailman/Cgi/admindb.py:285 Mailman/Cgi/admindb.py:336
msgid "Reason for refusal"
msgstr ""

#: Mailman/Cgi/admindb.py:303 Mailman/Cgi/admindb.py:362
#: Mailman/Cgi/admindb.py:638
msgid "Approve"
msgstr ""

#: Mailman/Cgi/admindb.py:313
msgid "Permanently ban from this list"
msgstr ""

#: Mailman/Cgi/admindb.py:334
msgid "User address/name"
msgstr ""

#: Mailman/Cgi/admindb.py:374
msgid "Unsubscription Requests"
msgstr ""

#: Mailman/Cgi/admindb.py:397 Mailman/Cgi/admindb.py:621
msgid "From:"
msgstr ""

#: Mailman/Cgi/admindb.py:400
msgid "Action to take on all these held messages:"
msgstr ""

#: Mailman/Cgi/admindb.py:412
msgid "Preserve messages for the site administrator"
msgstr ""

#: Mailman/Cgi/admindb.py:418
msgid "Forward messages (individually) to:"
msgstr ""

#: Mailman/Cgi/admindb.py:436
msgid "Clear this member's <em>moderate</em> flag"
msgstr ""

#: Mailman/Cgi/admindb.py:440
msgid "<em>The sender is now a member of this list</em>"
msgstr ""

#: Mailman/Cgi/admindb.py:449
msgid "Add <b>%(esender)s</b> to one of these sender filters:"
msgstr ""

#: Mailman/Cgi/admindb.py:454
msgid "Accepts"
msgstr ""

#: Mailman/Cgi/admindb.py:454
msgid "Discards"
msgstr ""

#: Mailman/Cgi/admindb.py:454
msgid "Holds"
msgstr ""

#: Mailman/Cgi/admindb.py:454
msgid "Rejects"
msgstr ""

#: Mailman/Cgi/admindb.py:463
msgid ""
"Ban <b>%(esender)s</b> from ever subscribing to this\n"
"                    mailing list"
msgstr ""

#: Mailman/Cgi/admindb.py:468
msgid ""
"Click on the message number to view the individual\n"
"            message, or you can "
msgstr ""

#: Mailman/Cgi/admindb.py:470
msgid "view all messages from %(esender)s"
msgstr ""

#: Mailman/Cgi/admindb.py:492 Mailman/Cgi/admindb.py:624
msgid "Subject:"
msgstr ""

#: Mailman/Cgi/admindb.py:495
msgid " bytes"
msgstr ""

#: Mailman/Cgi/admindb.py:495
msgid "Size:"
msgstr ""

#: Mailman/Cgi/admindb.py:499 Mailman/Handlers/Scrubber.py:207
#: Mailman/Handlers/Scrubber.py:304 Mailman/Handlers/Scrubber.py:305
msgid "not available"
msgstr ""

#: Mailman/Cgi/admindb.py:500 Mailman/Cgi/admindb.py:627
msgid "Reason:"
msgstr ""

#: Mailman/Cgi/admindb.py:504 Mailman/Cgi/admindb.py:631
msgid "Received:"
msgstr ""

#: Mailman/Cgi/admindb.py:562
msgid "Posting Held for Approval"
msgstr ""

#: Mailman/Cgi/admindb.py:564
msgid " (%(count)d of %(total)d)"
msgstr ""

#: Mailman/Cgi/admindb.py:575
msgid "<em>Message with id #%(id)d was lost."
msgstr ""

#: Mailman/Cgi/admindb.py:584
msgid "<em>Message with id #%(id)d is corrupted."
msgstr ""

#: Mailman/Cgi/admindb.py:648
msgid "Preserve message for site administrator"
msgstr ""

#: Mailman/Cgi/admindb.py:652
msgid "Additionally, forward this message to: "
msgstr ""

#: Mailman/Cgi/admindb.py:656
msgid "[No explanation given]"
msgstr ""

#: Mailman/Cgi/admindb.py:658
msgid "If you reject this post,<br>please explain (optional):"
msgstr ""

#: Mailman/Cgi/admindb.py:664
msgid "Message Headers:"
msgstr ""

#: Mailman/Cgi/admindb.py:669
msgid "Message Excerpt:"
msgstr ""

#: Mailman/Cgi/admindb.py:709 Mailman/Deliverer.py:143
msgid "No reason given"
msgstr ""

#: Mailman/Cgi/admindb.py:771 Mailman/ListAdmin.py:296
#: Mailman/ListAdmin.py:414
msgid "[No reason given]"
msgstr ""

#: Mailman/Cgi/admindb.py:803
msgid "Database Updated..."
msgstr ""

#: Mailman/Cgi/admindb.py:806
msgid " is already a member"
msgstr ""

#: Mailman/Cgi/admindb.py:809
msgid "%(addr)s is banned (matched: %(patt)s)"
msgstr ""

#: Mailman/Cgi/confirm.py:76
msgid "Confirmation string was empty."
msgstr ""

#: Mailman/Cgi/confirm.py:96
msgid ""
"<b>Invalid confirmation string:</b>\n"
"    %(safecookie)s.\n"
"\n"
"    <p>Note that confirmation strings expire approximately\n"
"    %(days)s days after the initial subscription request.  If your\n"
"    confirmation has expired, please try to re-submit your subscription.\n"
"    Otherwise, <a href=\"%(confirmurl)s\">re-enter</a> your confirmation\n"
"    string."
msgstr ""

#: Mailman/Cgi/confirm.py:129
msgid ""
"The address requesting unsubscription is not\n"
"                a member of the mailing list.  Perhaps you have already "
"been\n"
"                unsubscribed, e.g. by the list administrator?"
msgstr ""

#: Mailman/Cgi/confirm.py:145
msgid ""
"The address requesting to be changed has\n"
"                    been subsequently unsubscribed.  This request has been\n"
"                    cancelled."
msgstr ""

#: Mailman/Cgi/confirm.py:165
msgid "System error, bad content: %(content)s"
msgstr ""

#: Mailman/Cgi/confirm.py:175
msgid "Bad confirmation string"
msgstr ""

#: Mailman/Cgi/confirm.py:194
msgid "Enter confirmation cookie"
msgstr ""

#: Mailman/Cgi/confirm.py:207
msgid ""
"Please enter the confirmation string\n"
"    (i.e. <em>cookie</em>) that you received in your email message, in the "
"box\n"
"    below.  Then hit the <em>Submit</em> button to proceed to the next\n"
"    confirmation step."
msgstr ""

#: Mailman/Cgi/confirm.py:212
msgid "Confirmation string:"
msgstr ""

#: Mailman/Cgi/confirm.py:214
msgid "Submit"
msgstr ""

#: Mailman/Cgi/confirm.py:231
msgid "Confirm subscription request"
msgstr ""

#: Mailman/Cgi/confirm.py:246
msgid ""
"Your confirmation is required in order to complete the\n"
"    subscription request to the mailing list <em>%(listname)s</em>.  Your\n"
"    subscription settings are shown below; make any necessary changes and "
"hit\n"
"    <em>Subscribe</em> to complete the confirmation process.  Once you've\n"
"    confirmed your subscription request, you will be shown your account\n"
"    options page which you can use to further customize your membership\n"
"    options.\n"
"\n"
"    <p>Note: your password will be emailed to you once your subscription is\n"
"    confirmed.  You can change it by visiting your personal options page.\n"
"\n"
"    <p>Or hit <em>Cancel my subscription request</em> if you no longer want "
"to\n"
"    subscribe to this list."
msgstr ""

#: Mailman/Cgi/confirm.py:261
msgid ""
"Your confirmation is required in order to continue with\n"
"        the subscription request to the mailing list <em>%(listname)s</em>.\n"
"        Your subscription settings are shown below; make any necessary "
"changes\n"
"        and hit <em>Subscribe to list ...</em> to complete the confirmation\n"
"        process.  Once you've confirmed your subscription request, the\n"
"        moderator must approve or reject your membership request.  You will\n"
"        receive notice of their decision.\n"
"\n"
"        <p>Note: your password will be emailed to you once your "
"subscription\n"
"        is confirmed.  You can change it by visiting your personal options\n"
"        page.\n"
"\n"
"        <p>Or, if you've changed your mind and do not want to subscribe to\n"
"        this mailing list, you can hit <em>Cancel my subscription\n"
"        request</em>."
msgstr ""

#: Mailman/Cgi/confirm.py:279
msgid "Your email address:"
msgstr ""

#: Mailman/Cgi/confirm.py:280
msgid "Your real name:"
msgstr ""

#: Mailman/Cgi/confirm.py:289
msgid "Receive digests?"
msgstr ""

#: Mailman/Cgi/confirm.py:298
msgid "Preferred language:"
msgstr ""

#: Mailman/Cgi/confirm.py:303
msgid "Cancel my subscription request"
msgstr ""

#: Mailman/Cgi/confirm.py:304
msgid "Subscribe to list %(listname)s"
msgstr ""

#: Mailman/Cgi/confirm.py:321
msgid "You have canceled your subscription request."
msgstr ""

#: Mailman/Cgi/confirm.py:359
msgid "Awaiting moderator approval"
msgstr ""

#: Mailman/Cgi/confirm.py:362
msgid ""
"            You have successfully confirmed your subscription request to "
"the\n"
"            mailing list %(listname)s, however final approval is required "
"from\n"
"            the list moderator before you will be subscribed.  Your request\n"
"            has been forwarded to the list moderator, and you will be "
"notified\n"
"            of the moderator's decision."
msgstr ""

#: Mailman/Cgi/confirm.py:369 Mailman/Cgi/confirm.py:434
#: Mailman/Cgi/confirm.py:523 Mailman/Cgi/confirm.py:752
msgid ""
"Invalid confirmation string.  It is\n"
"            possible that you are attempting to confirm a request for an\n"
"            address that has already been unsubscribed."
msgstr ""

#: Mailman/Cgi/confirm.py:373
msgid "You are already a member of this mailing list!"
msgstr ""

#: Mailman/Cgi/confirm.py:376
msgid ""
"You are currently banned from subscribing to\n"
"            this list.  If you think this restriction is erroneous, please\n"
"            contact the list owners at %(owneraddr)s."
msgstr ""

#: Mailman/Cgi/confirm.py:380
msgid ""
"            You were not invited to this mailing list.  The invitation has\n"
"            been discarded, and both list administrators have been\n"
"            alerted."
msgstr ""

#: Mailman/Cgi/confirm.py:390
msgid "Subscription request confirmed"
msgstr ""

#: Mailman/Cgi/confirm.py:394
msgid ""
"            You have successfully confirmed your subscription request for\n"
"            \"%(addr)s\" to the %(listname)s mailing list.  A separate\n"
"            confirmation message will be sent to your email address, along\n"
"            with your password, and other useful information and links.\n"
"\n"
"            <p>You can now\n"
"            <a href=\"%(optionsurl)s\">proceed to your membership login\n"
"            page</a>."
msgstr ""

#: Mailman/Cgi/confirm.py:412
msgid "You have canceled your unsubscription request."
msgstr ""

#: Mailman/Cgi/confirm.py:440
msgid "Unsubscription request confirmed"
msgstr ""

#: Mailman/Cgi/confirm.py:444
msgid ""
"            You have successfully unsubscribed from the %(listname)s "
"mailing\n"
"            list.  You can now <a href=\"%(listinfourl)s\">visit the list's "
"main\n"
"            information page</a>."
msgstr ""

#: Mailman/Cgi/confirm.py:455
msgid "Confirm unsubscription request"
msgstr ""

#: Mailman/Cgi/confirm.py:470 Mailman/Cgi/confirm.py:566
msgid "<em>Not available</em>"
msgstr ""

#: Mailman/Cgi/confirm.py:473
msgid ""
"Your confirmation is required in order to complete the\n"
"    unsubscription request from the mailing list <em>%(listname)s</em>.  "
"You\n"
"    are currently subscribed with\n"
"\n"
"    <ul><li><b>Real name:</b> %(fullname)s\n"
"        <li><b>Email address:</b> %(addr)s\n"
"    </ul>\n"
"\n"
"    Hit the <em>Unsubscribe</em> button below to complete the confirmation\n"
"    process.\n"
"\n"
"    <p>Or hit <em>Cancel and discard</em> to cancel this unsubscription\n"
"    request."
msgstr ""

#: Mailman/Cgi/confirm.py:489 Mailman/Cgi/options.py:746
#: Mailman/Cgi/options.py:887 Mailman/Cgi/options.py:897
msgid "Unsubscribe"
msgstr ""

#: Mailman/Cgi/confirm.py:490 Mailman/Cgi/confirm.py:595
msgid "Cancel and discard"
msgstr ""

#: Mailman/Cgi/confirm.py:500
msgid "You have canceled your change of address request."
msgstr ""

#: Mailman/Cgi/confirm.py:529
msgid ""
"%(newaddr)s is banned from subscribing to the\n"
"            %(realname)s list.  If you think this restriction is erroneous,\n"
"            please contact the list owners at %(owneraddr)s."
msgstr ""

#: Mailman/Cgi/confirm.py:535
msgid "Change of address request confirmed"
msgstr ""

#: Mailman/Cgi/confirm.py:539
msgid ""
"            You have successfully changed your address on the %(listname)s\n"
"            mailing list from <b>%(oldaddr)s</b> to <b>%(newaddr)s</b>.  "
"You\n"
"            can now <a href=\"%(optionsurl)s\">proceed to your membership\n"
"            login page</a>."
msgstr ""

#: Mailman/Cgi/confirm.py:551
msgid "Confirm change of address request"
msgstr ""

#: Mailman/Cgi/confirm.py:570
msgid "globally"
msgstr ""

#: Mailman/Cgi/confirm.py:573
msgid ""
"Your confirmation is required in order to complete the\n"
"    change of address request for the mailing list <em>%(listname)s</em>.  "
"You\n"
"    are currently subscribed with\n"
"\n"
"    <ul><li><b>Real name:</b> %(fullname)s\n"
"        <li><b>Old email address:</b> %(oldaddr)s\n"
"    </ul>\n"
"\n"
"    and you have requested to %(globallys)s change your email address to\n"
"\n"
"    <ul><li><b>New email address:</b> %(newaddr)s\n"
"    </ul>\n"
"\n"
"    Hit the <em>Change address</em> button below to complete the "
"confirmation\n"
"    process.\n"
"\n"
"    <p>Or hit <em>Cancel and discard</em> to cancel this change of address\n"
"    request."
msgstr ""

#: Mailman/Cgi/confirm.py:594
msgid "Change address"
msgstr ""

#: Mailman/Cgi/confirm.py:603 Mailman/Cgi/confirm.py:717
msgid "Continue awaiting approval"
msgstr ""

#: Mailman/Cgi/confirm.py:611
msgid ""
"Okay, the list moderator will still have the\n"
"    opportunity to approve or reject this message."
msgstr ""

#: Mailman/Cgi/confirm.py:637
msgid "Sender discarded message via web."
msgstr ""

#: Mailman/Cgi/confirm.py:639
msgid ""
"The held message with the Subject:\n"
"            header <em>%(subject)s</em> could not be found.  The most "
"likely\n"
"            reason for this is that the list moderator has already approved "
"or\n"
"            rejected the message.  You were not able to cancel it in\n"
"            time."
msgstr ""

#: Mailman/Cgi/confirm.py:647
msgid "Posted message canceled"
msgstr ""

#: Mailman/Cgi/confirm.py:650
msgid ""
"            You have successfully canceled the posting of your message with\n"
"            the Subject: header <em>%(subject)s</em> to the mailing list\n"
"            %(listname)s."
msgstr ""

#: Mailman/Cgi/confirm.py:661
msgid "Cancel held message posting"
msgstr ""

#: Mailman/Cgi/confirm.py:686
msgid ""
"The held message you were referred to has\n"
"        already been handled by the list administrator."
msgstr ""

#: Mailman/Cgi/confirm.py:700
msgid ""
"Your confirmation is required in order to cancel the\n"
"    posting of your message to the mailing list <em>%(listname)s</em>:\n"
"\n"
"    <ul><li><b>Sender:</b> %(sender)s\n"
"        <li><b>Subject:</b> %(subject)s\n"
"        <li><b>Reason:</b> %(reason)s\n"
"    </ul>\n"
"\n"
"    Hit the <em>Cancel posting</em> button to discard the posting.\n"
"\n"
"    <p>Or hit the <em>Continue awaiting approval</em> button to continue to\n"
"    allow the list moderator to approve or reject the message."
msgstr ""

#: Mailman/Cgi/confirm.py:716
msgid "Cancel posting"
msgstr ""

#: Mailman/Cgi/confirm.py:728
msgid ""
"You have canceled the re-enabling of your membership.  If\n"
"    we continue to receive bounces from your address, it could be deleted "
"from\n"
"    this mailing list."
msgstr ""

#: Mailman/Cgi/confirm.py:758
msgid "Membership re-enabled."
msgstr ""

#: Mailman/Cgi/confirm.py:762
msgid ""
"            You have successfully re-enabled your membership in the\n"
"            %(listname)s mailing list.  You can now <a\n"
"            href=\"%(optionsurl)s\">visit your member options page</a>.\n"
"            "
msgstr ""

#: Mailman/Cgi/confirm.py:774
msgid "Re-enable mailing list membership"
msgstr ""

#: Mailman/Cgi/confirm.py:791
msgid ""
"We're sorry, but you have already been unsubscribed\n"
"        from this mailing list.  To re-subscribe, please visit the\n"
"        <a href=\"%(listinfourl)s\">list information page</a>."
msgstr ""

#: Mailman/Cgi/confirm.py:806
msgid "<em>not available</em>"
msgstr ""

#: Mailman/Cgi/confirm.py:810
msgid ""
"Your membership in the %(realname)s mailing list is\n"
"    currently disabled due to excessive bounces.  Your confirmation is\n"
"    required in order to re-enable delivery to your address.  We have the\n"
"    following information on file:\n"
"\n"
"    <ul><li><b>Member address:</b> %(member)s\n"
"        <li><b>Member name:</b> %(username)s\n"
"        <li><b>Last bounce received on:</b> %(date)s\n"
"        <li><b>Approximate number of days before you are permanently "
"removed\n"
"               from this list:</b> %(daysleft)s\n"
"    </ul>\n"
"\n"
"    Hit the <em>Re-enable membership</em> button to resume receiving "
"postings\n"
"    from the mailing list.  Or hit the <em>Cancel</em> button to defer\n"
"    re-enabling your membership.\n"
"    "
msgstr ""

#: Mailman/Cgi/confirm.py:830
msgid "Re-enable membership"
msgstr ""

#: Mailman/Cgi/confirm.py:831
msgid "Cancel"
msgstr ""

#: Mailman/Cgi/create.py:49 Mailman/Cgi/rmlist.py:48
msgid "Bad URL specification"
msgstr ""

#: Mailman/Cgi/create.py:64 Mailman/Cgi/rmlist.py:176
msgid "Return to the "
msgstr ""

#: Mailman/Cgi/create.py:66 Mailman/Cgi/rmlist.py:178
msgid "general list overview"
msgstr ""

#: Mailman/Cgi/create.py:67 Mailman/Cgi/rmlist.py:179
msgid "<br>Return to the "
msgstr ""

#: Mailman/Cgi/create.py:69 Mailman/Cgi/rmlist.py:181
msgid "administrative list overview"
msgstr ""

#: Mailman/Cgi/create.py:104
msgid "List name must not include \"@\": %(safelistname)s"
msgstr ""

#: Mailman/Cgi/create.py:111
msgid "List already exists: %(safelistname)s"
msgstr ""

#: Mailman/Cgi/create.py:115
msgid "You forgot to enter the list name"
msgstr ""

#: Mailman/Cgi/create.py:119
msgid "You forgot to specify the list owner"
msgstr ""

#: Mailman/Cgi/create.py:126
msgid ""
"Leave the initial password (and confirmation) fields\n"
"                blank if you want Mailman to autogenerate the list\n"
"                passwords."
msgstr ""

#: Mailman/Cgi/create.py:135
msgid "Initial list passwords do not match"
msgstr ""

#: Mailman/Cgi/create.py:144
msgid "The list password cannot be empty<!-- ignore -->"
msgstr ""

#: Mailman/Cgi/create.py:156
msgid "You are not authorized to create new mailing lists"
msgstr ""

#: Mailman/Cgi/create.py:164
msgid "Unknown virtual host: %(safehostname)s"
msgstr ""

#: Mailman/Cgi/create.py:195 bin/newlist:202
msgid "Bad owner email address: %(s)s"
msgstr ""

#: Mailman/Cgi/create.py:199 bin/newlist:170 bin/newlist:204
msgid "List already exists: %(listname)s"
msgstr ""

#: Mailman/Cgi/create.py:203 bin/newlist:200
msgid "Illegal list name: %(s)s"
msgstr ""

#: Mailman/Cgi/create.py:208
msgid ""
"Some unknown error occurred while creating the list.\n"
"                Please contact the site administrator for assistance."
msgstr ""

#: Mailman/Cgi/create.py:245 bin/newlist:245
msgid "Your new mailing list: %(listname)s"
msgstr ""

#: Mailman/Cgi/create.py:254
msgid "Mailing list creation results"
msgstr ""

#: Mailman/Cgi/create.py:260
msgid ""
"You have successfully created the mailing list\n"
"    <b>%(listname)s</b> and notification has been sent to the list owner\n"
"    <b>%(owner)s</b>.  You can now:"
msgstr ""

#: Mailman/Cgi/create.py:264
msgid "Visit the list's info page"
msgstr ""

#: Mailman/Cgi/create.py:265
msgid "Visit the list's admin page"
msgstr ""

#: Mailman/Cgi/create.py:266
msgid "Create another list"
msgstr ""

#: Mailman/Cgi/create.py:284
msgid "Create a %(hostname)s Mailing List"
msgstr ""

#: Mailman/Cgi/create.py:293 Mailman/Cgi/rmlist.py:199
#: Mailman/Gui/Bounce.py:187 Mailman/htmlformat.py:339
msgid "Error: "
msgstr ""

#: Mailman/Cgi/create.py:295
msgid ""
"You can create a new mailing list by entering the\n"
"    relevant information into the form below.  The name of the mailing list\n"
"    will be used as the primary address for posting messages to the list, "
"so\n"
"    it should be lowercased.  You will not be able to change this once the\n"
"    list is created.\n"
"\n"
"    <p>You also need to enter the email address of the initial list owner.\n"
"    Once the list is created, the list owner will be given notification, "
"along\n"
"    with the initial list password.  The list owner will then be able to\n"
"    modify the password and add or remove additional list owners.\n"
"\n"
"    <p>If you want Mailman to automatically generate the initial list admin\n"
"    password, click on `Yes' in the autogenerate field below, and leave the\n"
"    initial list password fields empty.\n"
"\n"
"    <p>You must have the proper authorization to create new mailing lists.\n"
"    Each site should have a <em>list creator's</em> password, which you can\n"
"    enter in the field at the bottom.  Note that the site administrator's\n"
"    password can also be used for authentication.\n"
"    "
msgstr ""

#: Mailman/Cgi/create.py:321
msgid "List Identity"
msgstr ""

#: Mailman/Cgi/create.py:325
msgid "Name of list:"
msgstr ""

#: Mailman/Cgi/create.py:331
msgid "Initial list owner address:"
msgstr ""

#: Mailman/Cgi/create.py:340
msgid "Auto-generate initial list password?"
msgstr ""

#: Mailman/Cgi/create.py:348
msgid "Initial list password:"
msgstr ""

#: Mailman/Cgi/create.py:354
msgid "Confirm initial password:"
msgstr ""

#: Mailman/Cgi/create.py:369
msgid "List Characteristics"
msgstr ""

#: Mailman/Cgi/create.py:373
msgid ""
"Should new members be quarantined before they\n"
"    are allowed to post unmoderated to this list?  Answer <em>Yes</em> to "
"hold\n"
"    new member postings for moderator approval by default."
msgstr ""

#: Mailman/Cgi/create.py:402
msgid ""
"Initial list of supported languages.  <p>Note that if you do not\n"
"        select at least one initial language, the list will use the server\n"
"        default language of %(deflang)s"
msgstr ""

#: Mailman/Cgi/create.py:413
msgid "Send \"list created\" email to list owner?"
msgstr ""

#: Mailman/Cgi/create.py:422
msgid "List creator's (authentication) password:"
msgstr ""

#: Mailman/Cgi/create.py:427
msgid "Create List"
msgstr ""

#: Mailman/Cgi/create.py:428
msgid "Clear Form"
msgstr ""

#: Mailman/Cgi/edithtml.py:45
msgid "General list information page"
msgstr ""

#: Mailman/Cgi/edithtml.py:46
msgid "Subscribe results page"
msgstr ""

#: Mailman/Cgi/edithtml.py:47
msgid "User specific options page"
msgstr ""

#: Mailman/Cgi/edithtml.py:48
msgid "Welcome email text file"
msgstr ""

#: Mailman/Cgi/edithtml.py:60
msgid "List name is required."
msgstr ""

#: Mailman/Cgi/edithtml.py:100
msgid "%(realname)s -- Edit html for %(template_info)s"
msgstr ""

#: Mailman/Cgi/edithtml.py:106
msgid "Edit HTML : Error"
msgstr ""

#: Mailman/Cgi/edithtml.py:107
msgid "%(safetemplatename)s: Invalid template"
msgstr ""

#: Mailman/Cgi/edithtml.py:112 Mailman/Cgi/edithtml.py:113
msgid "%(realname)s -- HTML Page Editing"
msgstr ""

#: Mailman/Cgi/edithtml.py:114
msgid "Select page to edit:"
msgstr ""

#: Mailman/Cgi/edithtml.py:140
msgid "View or edit the list configuration information."
msgstr ""

#: Mailman/Cgi/edithtml.py:148
msgid "When you are done making changes..."
msgstr ""

#: Mailman/Cgi/edithtml.py:149
msgid "Submit Changes"
msgstr ""

#: Mailman/Cgi/edithtml.py:156
msgid "Can't have empty html page."
msgstr ""

#: Mailman/Cgi/edithtml.py:157
msgid "HTML Unchanged."
msgstr ""

#: Mailman/Cgi/edithtml.py:177
msgid "HTML successfully updated."
msgstr ""

#: Mailman/Cgi/listinfo.py:73
msgid "%(hostname)s Mailing Lists"
msgstr ""

#: Mailman/Cgi/listinfo.py:106
msgid ""
"<p>There currently are no publicly-advertised\n"
"            %(mailmanlink)s mailing lists on %(hostname)s."
msgstr ""

#: Mailman/Cgi/listinfo.py:110
msgid ""
"<p>Below is a listing of all the public mailing lists on\n"
"            %(hostname)s.  Click on a list name to get more information "
"about\n"
"            the list, or to subscribe, unsubscribe, and change the "
"preferences\n"
"            on your subscription."
msgstr ""

#: Mailman/Cgi/listinfo.py:116
msgid "right"
msgstr ""

#: Mailman/Cgi/listinfo.py:119
msgid ""
" To visit the general information page for an unadvertised list,\n"
"        open a URL similar to this one, but with a '/' and the %(adj)s\n"
"        list name appended.\n"
"        <p>List administrators, you can visit "
msgstr ""

#: Mailman/Cgi/listinfo.py:124
msgid "the list admin overview page"
msgstr ""

#: Mailman/Cgi/listinfo.py:125
msgid ""
" to find the management interface for your list.\n"
"         <p>If you are having trouble using the lists, please contact "
msgstr ""

#: Mailman/Cgi/listinfo.py:190
msgid "Edit Options"
msgstr ""

#: Mailman/Cgi/listinfo.py:197 Mailman/Cgi/options.py:853
#: Mailman/Cgi/roster.py:109
msgid "View this page in"
msgstr ""

#: Mailman/Cgi/options.py:58 Mailman/Cgi/options.py:75
msgid "CGI script error"
msgstr ""

#: Mailman/Cgi/options.py:61
msgid "Invalid options to CGI script."
msgstr ""

#: Mailman/Cgi/options.py:105
msgid "No address given"
msgstr ""

#: Mailman/Cgi/options.py:117
msgid "Illegal Email Address: %(safeuser)s"
msgstr ""

#: Mailman/Cgi/options.py:124 Mailman/Cgi/options.py:188
#: Mailman/Cgi/options.py:210
msgid "No such member: %(safeuser)s."
msgstr ""

#: Mailman/Cgi/options.py:174
msgid ""
"Your unsubscription request has been\n"
"                    forwarded to the list administrator for approval."
msgstr ""

#: Mailman/Cgi/options.py:179 Mailman/Cgi/options.py:193
msgid "The confirmation email has been sent."
msgstr ""

#: Mailman/Cgi/options.py:204 Mailman/Cgi/options.py:216
#: Mailman/Cgi/options.py:271
msgid "A reminder of your password has been emailed to you."
msgstr ""

#: Mailman/Cgi/options.py:245
msgid "Authentication failed."
msgstr ""

#: Mailman/Cgi/options.py:278
msgid ""
"The list administrator may not view the other\n"
"            subscriptions for this user."
msgstr ""

#: Mailman/Cgi/options.py:279 Mailman/Cgi/options.py:322
#: Mailman/Cgi/options.py:442 Mailman/Cgi/options.py:658
msgid "Note: "
msgstr ""

#: Mailman/Cgi/options.py:284
msgid "List subscriptions for %(safeuser)s on %(hostname)s"
msgstr ""

#: Mailman/Cgi/options.py:287
msgid ""
"Click on a link to visit your options page for the\n"
"        requested mailing list."
msgstr ""

#: Mailman/Cgi/options.py:319
msgid ""
"The list administrator may not change the names\n"
"            or addresses for this user's other subscriptions.  However, the\n"
"            subscription for this mailing list has been changed."
msgstr ""

#: Mailman/Cgi/options.py:342
msgid "Addresses did not match!"
msgstr ""

#: Mailman/Cgi/options.py:347
msgid "You are already using that email address"
msgstr ""

#: Mailman/Cgi/options.py:359
msgid ""
"The new address you requested %(newaddr)s is already a member of the\n"
"%(listname)s mailing list, however you have also requested a global change "
"of\n"
"address.  Upon confirmation, any other mailing list containing the address\n"
"%(safeuser)s will be changed. "
msgstr ""

#: Mailman/Cgi/options.py:368
msgid "The new address is already a member: %(newaddr)s"
msgstr ""

#: Mailman/Cgi/options.py:374
msgid "Addresses may not be blank"
msgstr ""

#: Mailman/Cgi/options.py:388
msgid "A confirmation message has been sent to %(newaddr)s. "
msgstr ""

#: Mailman/Cgi/options.py:397
msgid "Bad email address provided"
msgstr ""

#: Mailman/Cgi/options.py:399
msgid "Illegal email address provided"
msgstr ""

#: Mailman/Cgi/options.py:401
msgid "%(newaddr)s is already a member of the list."
msgstr ""

#: Mailman/Cgi/options.py:404
msgid ""
"%(newaddr)s is banned from this list.  If you\n"
"                      think this restriction is erroneous, please contact\n"
"                      the list owners at %(owneraddr)s."
msgstr ""

#: Mailman/Cgi/options.py:415
msgid "Member name successfully changed. "
msgstr ""

#: Mailman/Cgi/options.py:426
msgid "Passwords may not be blank"
msgstr ""

#: Mailman/Cgi/options.py:431
msgid "Passwords did not match!"
msgstr ""

#: Mailman/Cgi/options.py:439
msgid ""
"The list administrator may not change the\n"
"            password for this user's other subscriptions.  However, the\n"
"            password for this mailing list has been changed."
msgstr ""

#: Mailman/Cgi/options.py:456 Mailman/Commands/cmd_password.py:83
#: Mailman/Commands/cmd_password.py:109
msgid "Password successfully changed."
msgstr ""

#: Mailman/Cgi/options.py:465
msgid ""
"You must confirm your unsubscription request by turning\n"
"                on the checkbox below the <em>Unsubscribe</em> button.  You\n"
"                have not been unsubscribed!"
msgstr ""

#: Mailman/Cgi/options.py:497
msgid "Unsubscription results"
msgstr ""

#: Mailman/Cgi/options.py:501
msgid ""
"Your unsubscription request has been received and\n"
"            forwarded on to the list moderators for approval.  You will\n"
"            receive notification once the list moderators have made their\n"
"            decision."
msgstr ""

#: Mailman/Cgi/options.py:506
msgid ""
"You have been successfully unsubscribed from the\n"
"            mailing list %(fqdn_listname)s.  If you were receiving digest\n"
"            deliveries you may get one more digest.  If you have any "
"questions\n"
"            about your unsubscription, please contact the list owners at\n"
"            %(owneraddr)s."
msgstr ""

#: Mailman/Cgi/options.py:655
msgid ""
"The list administrator may not change the\n"
"                options for this user's other subscriptions.  However the\n"
"                options for this mailing list subscription has been\n"
"                changed."
msgstr ""

#: Mailman/Cgi/options.py:665
msgid ""
"The list administrator has disabled digest delivery for\n"
"            this list, so your delivery option has not been set.  However "
"your\n"
"            other options have been set successfully."
msgstr ""

#: Mailman/Cgi/options.py:669
msgid ""
"The list administrator has disabled non-digest delivery\n"
"            for this list, so your delivery option has not been set.  "
"However\n"
"            your other options have been set successfully."
msgstr ""

#: Mailman/Cgi/options.py:673
msgid "You have successfully set your options."
msgstr ""

#: Mailman/Cgi/options.py:676
msgid "You may get one last digest."
msgstr ""

#: Mailman/Cgi/options.py:748
msgid "<em>Yes, I really want to unsubscribe</em>"
msgstr ""

#: Mailman/Cgi/options.py:752
msgid "Change My Password"
msgstr ""

#: Mailman/Cgi/options.py:755
msgid "List my other subscriptions"
msgstr ""

#: Mailman/Cgi/options.py:761
msgid "Email My Password To Me"
msgstr ""

#: Mailman/Cgi/options.py:763
msgid "password"
msgstr ""

#: Mailman/Cgi/options.py:765
msgid "Log out"
msgstr ""

#: Mailman/Cgi/options.py:767
msgid "Submit My Changes"
msgstr ""

#: Mailman/Cgi/options.py:779
msgid "days"
msgstr ""

#: Mailman/Cgi/options.py:781
msgid "day"
msgstr ""

#: Mailman/Cgi/options.py:782
msgid "%(days)d %(units)s"
msgstr ""

#: Mailman/Cgi/options.py:788
msgid "Change My Address and Name"
msgstr ""

#: Mailman/Cgi/options.py:812
msgid "<em>No topics defined</em>"
msgstr ""

#: Mailman/Cgi/options.py:820
msgid ""
"\n"
"You are subscribed to this list with the case-preserved address\n"
"<em>%(cpuser)s</em>."
msgstr ""

#: Mailman/Cgi/options.py:834
msgid "%(realname)s list: member options login page"
msgstr ""

#: Mailman/Cgi/options.py:835
msgid "email address and "
msgstr ""

#: Mailman/Cgi/options.py:838
msgid "%(realname)s list: member options for user %(safeuser)s"
msgstr ""

#: Mailman/Cgi/options.py:863
msgid ""
"In order to change your membership option, you must\n"
"    first log in by giving your %(extra)smembership password in the section\n"
"    below.  If you don't remember your membership password, you can have it\n"
"    emailed to you by clicking on the button below.  If you just want to\n"
"    unsubscribe from this list, click on the <em>Unsubscribe</em> button and "
"a\n"
"    confirmation message will be sent to you.\n"
"\n"
"    <p><strong><em>Important:</em></strong> From this point on, you must "
"have\n"
"    cookies enabled in your browser, otherwise none of your changes will "
"take\n"
"    effect.\n"
"    "
msgstr ""

#: Mailman/Cgi/options.py:877
msgid "Email address:"
msgstr ""

#: Mailman/Cgi/options.py:881
msgid "Password:"
msgstr ""

#: Mailman/Cgi/options.py:883
msgid "Log in"
msgstr ""

#: Mailman/Cgi/options.py:891
msgid ""
"By clicking on the <em>Unsubscribe</em> button, a\n"
"    confirmation message will be emailed to you.  This message will have a\n"
"    link that you should click on to complete the removal process (you can\n"
"    also confirm by email; see the instructions in the confirmation\n"
"    message)."
msgstr ""

#: Mailman/Cgi/options.py:899
msgid "Password reminder"
msgstr ""

#: Mailman/Cgi/options.py:903
msgid ""
"By clicking on the <em>Remind</em> button, your\n"
"    password will be emailed to you."
msgstr ""

#: Mailman/Cgi/options.py:906
msgid "Remind"
msgstr ""

#: Mailman/Cgi/options.py:1006
msgid "<missing>"
msgstr ""

#: Mailman/Cgi/options.py:1017
msgid "Requested topic is not valid: %(topicname)s"
msgstr ""

#: Mailman/Cgi/options.py:1022
msgid "Topic filter details"
msgstr ""

#: Mailman/Cgi/options.py:1025
msgid "Name:"
msgstr ""

#: Mailman/Cgi/options.py:1027
msgid "Pattern (as regexp):"
msgstr ""

#: Mailman/Cgi/private.py:64
msgid "Private Archive Error"
msgstr ""

#: Mailman/Cgi/private.py:65
msgid "You must specify a list."
msgstr ""

#: Mailman/Cgi/private.py:72
msgid "Private archive - \"./\" and \"../\" not allowed in URL."
msgstr ""

#: Mailman/Cgi/private.py:109
msgid "Private Archive Error - %(msg)s"
msgstr ""

#: Mailman/Cgi/private.py:178
msgid "Private archive file not found"
msgstr ""

#: Mailman/Cgi/rmlist.py:81
msgid "You're being a sneaky list owner!"
msgstr ""

#: Mailman/Cgi/rmlist.py:119
msgid "You are not authorized to delete this mailing list"
msgstr ""

#: Mailman/Cgi/rmlist.py:160
msgid "Mailing list deletion results"
msgstr ""

#: Mailman/Cgi/rmlist.py:167
msgid ""
"You have successfully deleted the mailing list\n"
"    <b>%(listname)s</b>."
msgstr ""

#: Mailman/Cgi/rmlist.py:171
msgid ""
"There were some problems deleting the mailing list\n"
"        <b>%(listname)s</b>.  Contact your site administrator at %(sitelist)"
"s\n"
"        for details."
msgstr ""

#: Mailman/Cgi/rmlist.py:188
msgid "Permanently remove mailing list <em>%(realname)s</em>"
msgstr ""

#: Mailman/Cgi/rmlist.py:202
msgid ""
"This page allows you as the list owner, to permanent\n"
"    remove this mailing list from the system.  <strong>This action is not\n"
"    undoable</strong> so you should undertake it only if you are absolutely\n"
"    sure this mailing list has served its purpose and is no longer "
"necessary.\n"
"\n"
"    <p>Note that no warning will be sent to your list members and after "
"this\n"
"    action, any subsequent messages sent to the mailing list, or any of its\n"
"    administrative addreses will bounce.\n"
"\n"
"    <p>You also have the option of removing the archives for this mailing "
"list\n"
"    at this time.  It is almost always recommended that you do\n"
"    <strong>not</strong> remove the archives, since they serve as the\n"
"    historical record of your mailing list.\n"
"\n"
"    <p>For your safety, you will be asked to reconfirm the list password.\n"
"    "
msgstr ""

#: Mailman/Cgi/rmlist.py:223
msgid "List password:"
msgstr ""

#: Mailman/Cgi/rmlist.py:227
msgid "Also delete archives?"
msgstr ""

#: Mailman/Cgi/rmlist.py:235
msgid "<b>Cancel</b> and return to list administration"
msgstr ""

#: Mailman/Cgi/rmlist.py:238
msgid "Delete this list"
msgstr ""

#: Mailman/Cgi/roster.py:48 Mailman/Cgi/subscribe.py:50
msgid "Invalid options to CGI script"
msgstr ""

#: Mailman/Cgi/roster.py:97
msgid "%(realname)s roster authentication failed."
msgstr ""

#: Mailman/Cgi/roster.py:125 Mailman/Cgi/roster.py:126
#: Mailman/Cgi/subscribe.py:49 Mailman/Cgi/subscribe.py:60
msgid "Error"
msgstr ""

#: Mailman/Cgi/subscribe.py:111
msgid "You must supply a valid email address."
msgstr ""

#: Mailman/Cgi/subscribe.py:123
msgid "You may not subscribe a list to itself!"
msgstr ""

#: Mailman/Cgi/subscribe.py:131
msgid "If you supply a password, you must confirm it."
msgstr ""

#: Mailman/Cgi/subscribe.py:133
msgid "Your passwords did not match."
msgstr ""

#: Mailman/Cgi/subscribe.py:167
msgid ""
"Your subscription request has been received, and will soon be acted upon.\n"
"Depending on the configuration of this mailing list, your subscription "
"request\n"
"may have to be first confirmed by you via email, or approved by the list\n"
"moderator.  If confirmation is required, you will soon get a confirmation\n"
"email which contains further instructions."
msgstr ""

#: Mailman/Cgi/subscribe.py:181
msgid ""
"The email address you supplied is banned from this\n"
"        mailing list.  If you think this restriction is erroneous, please\n"
"        contact the list owners at %(listowner)s."
msgstr ""

#: Mailman/Cgi/subscribe.py:185
msgid ""
"The email address you supplied is not valid.  (E.g. it must contain an\n"
"`@'.)"
msgstr ""

#: Mailman/Cgi/subscribe.py:189
msgid ""
"Your subscription is not allowed because the email address you gave is\n"
"insecure."
msgstr ""

#: Mailman/Cgi/subscribe.py:197
msgid ""
"Confirmation from your email address is required, to prevent anyone from\n"
"subscribing you without permission.  Instructions are being sent to you at\n"
"%(email)s.  Please note your subscription will not start until you confirm\n"
"your subscription."
msgstr ""

#: Mailman/Cgi/subscribe.py:209
msgid ""
"Your subscription request was deferred because %(x)s.  Your request has "
"been\n"
"forwarded to the list moderator.  You will receive email informing you of "
"the\n"
"moderator's decision when they get to your request."
msgstr ""

#: Mailman/Cgi/subscribe.py:216 Mailman/Commands/cmd_confirm.py:61
msgid "You are already subscribed."
msgstr ""

#: Mailman/Cgi/subscribe.py:230
msgid "Mailman privacy alert"
msgstr ""

#: Mailman/Cgi/subscribe.py:231
msgid ""
"An attempt was made to subscribe your address to the mailing list\n"
"%(listaddr)s.  You are already subscribed to this mailing list.\n"
"\n"
"Note that the list membership is not public, so it is possible that a bad\n"
"person was trying to probe the list for its membership.  This would be a\n"
"privacy violation if we let them do this, but we didn't.\n"
"\n"
"If you submitted the subscription request and forgot that you were already\n"
"subscribed to the list, then you can ignore this message.  If you suspect "
"that\n"
"an attempt is being made to covertly discover whether you are a member of "
"this\n"
"list, and you are worried about your privacy, then feel free to send a "
"message\n"
"to the list administrator at %(listowner)s.\n"
msgstr ""

#: Mailman/Cgi/subscribe.py:250
msgid "This list does not support digest delivery."
msgstr ""

#: Mailman/Cgi/subscribe.py:252
msgid "This list only supports digest delivery."
msgstr ""

#: Mailman/Cgi/subscribe.py:259
msgid "You have been successfully subscribed to the %(realname)s mailing list."
msgstr ""

#: Mailman/Commands/cmd_confirm.py:18
msgid ""
"\n"
"    confirm <confirmation-string>\n"
"        Confirm an action.  The confirmation-string is required and should "
"be\n"
"        supplied by a mailback confirmation notice.\n"
msgstr ""

#: Mailman/Commands/cmd_confirm.py:41 Mailman/Commands/cmd_lists.py:40
#: Mailman/Commands/cmd_set.py:133 Mailman/Commands/cmd_subscribe.py:69
#: Mailman/Commands/cmd_unsubscribe.py:52 Mailman/Commands/cmd_who.py:65
msgid "Usage:"
msgstr ""

#: Mailman/Commands/cmd_confirm.py:50
msgid ""
"Invalid confirmation string.  Note that confirmation strings expire\n"
"approximately %(days)s days after the initial subscription request.  If "
"your\n"
"confirmation has expired, please try to re-submit your original request or\n"
"message."
msgstr ""

#: Mailman/Commands/cmd_confirm.py:56
msgid "Your request has been forwarded to the list moderator for approval."
msgstr ""

#: Mailman/Commands/cmd_confirm.py:64
msgid ""
"You are not currently a member.  Have you already unsubscribed or changed\n"
"your email address?"
msgstr ""

#: Mailman/Commands/cmd_confirm.py:69
msgid ""
"You are currently banned from subscribing to this list.  If you think this\n"
"restriction is erroneous, please contact the list owners at\n"
"%(owneraddr)s."
msgstr ""

#: Mailman/Commands/cmd_confirm.py:74
msgid ""
"You were not invited to this mailing list.  The invitation has been "
"discarded,\n"
"and both list administrators have been alerted."
msgstr ""

#: Mailman/Commands/cmd_confirm.py:78
msgid "Bad approval password given.  Held message is still being held."
msgstr ""

#: Mailman/Commands/cmd_confirm.py:87
msgid "Confirmation succeeded"
msgstr ""

#: Mailman/Commands/cmd_echo.py:17
msgid ""
"\n"
"    echo [args]\n"
"        Simply echo an acknowledgement.  Args are echoed back unchanged.\n"
msgstr ""

#: Mailman/Commands/cmd_end.py:17
msgid ""
"\n"
"    end\n"
"        Stop processing commands.  Use this if your mail program "
"automatically\n"
"        adds a signature file.\n"
msgstr ""

#: Mailman/Commands/cmd_help.py:17
msgid ""
"\n"
"    help\n"
"        Print this help message.\n"
msgstr ""

#: Mailman/Commands/cmd_help.py:47
msgid "You can access your personal options via the following url:"
msgstr ""

#: Mailman/Commands/cmd_info.py:17
msgid ""
"\n"
"    info\n"
"        Get information about this mailing list.\n"
msgstr ""

#: Mailman/Commands/cmd_info.py:39 Mailman/Commands/cmd_lists.py:62
msgid "n/a"
msgstr ""

#: Mailman/Commands/cmd_info.py:44
msgid "List name:    %(listname)s"
msgstr ""

#: Mailman/Commands/cmd_info.py:45
msgid "Description:  %(description)s"
msgstr ""

#: Mailman/Commands/cmd_info.py:46
msgid "Postings to:  %(postaddr)s"
msgstr ""

#: Mailman/Commands/cmd_info.py:47
msgid "List Helpbot: %(requestaddr)s"
msgstr ""

#: Mailman/Commands/cmd_info.py:48
msgid "List Owners:  %(owneraddr)s"
msgstr ""

#: Mailman/Commands/cmd_info.py:49
msgid "More information: %(listurl)s"
msgstr ""

#: Mailman/Commands/cmd_join.py:17
msgid "The `join' command is synonymous with `subscribe'.\n"
msgstr ""

#: Mailman/Commands/cmd_leave.py:17
msgid "The `leave' command is synonymous with `unsubscribe'.\n"
msgstr ""

#: Mailman/Commands/cmd_lists.py:17
msgid ""
"\n"
"    lists\n"
"        See a list of the public mailing lists on this GNU Mailman server.\n"
msgstr ""

#: Mailman/Commands/cmd_lists.py:44
msgid "Public mailing lists at %(hostname)s:"
msgstr ""

#: Mailman/Commands/cmd_lists.py:66
msgid "%(i)3d. List name:   %(realname)s"
msgstr ""

#: Mailman/Commands/cmd_lists.py:67
msgid "     Description: %(description)s"
msgstr ""

#: Mailman/Commands/cmd_lists.py:68
msgid "     Requests to: %(requestaddr)s"
msgstr ""

#: Mailman/Commands/cmd_password.py:17
msgid ""
"\n"
"    password [<oldpassword> <newpassword>] [address=<address>]\n"
"        Retrieve or change your password.  With no arguments, this returns\n"
"        your current password.  With arguments <oldpassword> and "
"<newpassword>\n"
"        you can change your password.\n"
"\n"
"        If you're posting from an address other than your membership "
"address,\n"
"        specify your membership address with `address=<address>' (no "
"brackets\n"
"        around the email address, and no quotes!).  Note that in this case "
"the\n"
"        response is always sent to the subscribed address.\n"
msgstr ""

#: Mailman/Commands/cmd_password.py:51 Mailman/Commands/cmd_password.py:66
msgid "Your password is: %(password)s"
msgstr ""

#: Mailman/Commands/cmd_password.py:57 Mailman/Commands/cmd_password.py:72
#: Mailman/Commands/cmd_password.py:95 Mailman/Commands/cmd_password.py:121
#: Mailman/Commands/cmd_set.py:149 Mailman/Commands/cmd_set.py:219
msgid "You are not a member of the %(listname)s mailing list"
msgstr ""

#: Mailman/Commands/cmd_password.py:85 Mailman/Commands/cmd_password.py:111
msgid ""
"You did not give the correct old password, so your password has not been\n"
"changed.  Use the no argument version of the password command to retrieve "
"your\n"
"current password, then try again."
msgstr ""

#: Mailman/Commands/cmd_password.py:89 Mailman/Commands/cmd_password.py:115
msgid ""
"\n"
"Usage:"
msgstr ""

#: Mailman/Commands/cmd_remove.py:17
msgid "The `remove' command is synonymous with `unsubscribe'.\n"
msgstr ""

#: Mailman/Commands/cmd_set.py:26
msgid ""
"\n"
"    set ...\n"
"        Set or view your membership options.\n"
"\n"
"        Use `set help' (without the quotes) to get a more detailed list of "
"the\n"
"        options you can change.\n"
"\n"
"        Use `set show' (without the quotes) to view your current option\n"
"        settings.\n"
msgstr ""

#: Mailman/Commands/cmd_set.py:37
msgid ""
"\n"
"    set help\n"
"        Show this detailed help.\n"
"\n"
"    set show [address=<address>]\n"
"        View your current option settings.  If you're posting from an "
"address\n"
"        other than your membership address, specify your membership address\n"
"        with `address=<address>' (no brackets around the email address, and "
"no\n"
"        quotes!).\n"
"\n"
"    set authenticate <password> [address=<address>]\n"
"        To set any of your options, you must include this command first, "
"along\n"
"        with your membership password.  If you're posting from an address\n"
"        other than your membership address, specify your membership address\n"
"        with `address=<address>' (no brackets around the email address, and "
"no\n"
"        quotes!).\n"
"\n"
"    set ack on\n"
"    set ack off\n"
"        When the `ack' option is turned on, you will receive an\n"
"        acknowledgement message whenever you post a message to the list.\n"
"\n"
"    set digest plain\n"
"    set digest mime\n"
"    set digest off\n"
"        When the `digest' option is turned off, you will receive postings\n"
"        immediately when they are posted.  Use `set digest plain' if "
"instead\n"
"        you want to receive postings bundled into a plain text digest\n"
"        (i.e. RFC 1153 digest).  Use `set digest mime' if instead you want "
"to\n"
"        receive postings bundled together into a MIME digest.\n"
"\n"
"    set delivery on\n"
"    set delivery off\n"
"        Turn delivery on or off.  This does not unsubscribe you, but "
"instead\n"
"        tells Mailman not to deliver messages to you for now.  This is "
"useful\n"
"        if you're going on vacation.  Be sure to use `set delivery on' when\n"
"        you return from vacation!\n"
"\n"
"    set myposts on\n"
"    set myposts off\n"
"        Use `set myposts off' to not receive copies of messages you post to\n"
"        the list.  This has no effect if you're receiving digests.\n"
"\n"
"    set hide on\n"
"    set hide off\n"
"        Use `set hide on' to conceal your email address when people request\n"
"        the membership list.\n"
"\n"
"    set duplicates on\n"
"    set duplicates off\n"
"        Use `set duplicates off' if you want Mailman to not send you "
"messages\n"
"        if your address is explicitly mentioned in the To: or Cc: fields of\n"
"        the message.  This can reduce the number of duplicate postings you\n"
"        will receive.\n"
"\n"
"    set reminders on\n"
"    set reminders off\n"
"        Use `set reminders off' if you want to disable the monthly password\n"
"        reminder for this mailing list.\n"
msgstr ""

#: Mailman/Commands/cmd_set.py:122
msgid "Bad set command: %(subcmd)s"
msgstr ""

#: Mailman/Commands/cmd_set.py:151
msgid "Your current option settings:"
msgstr ""

#: Mailman/Commands/cmd_set.py:153 Mailman/Commands/cmd_set.py:191
#: Mailman/Commands/cmd_set.py:194 Mailman/Commands/cmd_set.py:198
#: Mailman/Commands/cmd_set.py:202
msgid "off"
msgstr ""

#: Mailman/Commands/cmd_set.py:153 Mailman/Commands/cmd_set.py:191
#: Mailman/Commands/cmd_set.py:194 Mailman/Commands/cmd_set.py:198
#: Mailman/Commands/cmd_set.py:202
msgid "on"
msgstr ""

#: Mailman/Commands/cmd_set.py:154
msgid "    ack %(onoff)s"
msgstr ""

#: Mailman/Commands/cmd_set.py:160
msgid "    digest plain"
msgstr ""

#: Mailman/Commands/cmd_set.py:162
msgid "    digest mime"
msgstr ""

#: Mailman/Commands/cmd_set.py:164
msgid "    digest off"
msgstr ""

#: Mailman/Commands/cmd_set.py:169
msgid "delivery on"
msgstr ""

#: Mailman/Commands/cmd_set.py:171 Mailman/Commands/cmd_set.py:174
#: Mailman/Commands/cmd_set.py:177 Mailman/Commands/cmd_set.py:181
msgid "delivery off"
msgstr ""

#: Mailman/Commands/cmd_set.py:172
msgid "by you"
msgstr ""

#: Mailman/Commands/cmd_set.py:175
msgid "by the admin"
msgstr ""

#: Mailman/Commands/cmd_set.py:178
msgid "due to bounces"
msgstr ""

#: Mailman/Commands/cmd_set.py:186
msgid "    %(status)s (%(how)s on %(date)s)"
msgstr ""

#: Mailman/Commands/cmd_set.py:192
msgid "    myposts %(onoff)s"
msgstr ""

#: Mailman/Commands/cmd_set.py:195
msgid "    hide %(onoff)s"
msgstr ""

#: Mailman/Commands/cmd_set.py:199
msgid "    duplicates %(onoff)s"
msgstr ""

#: Mailman/Commands/cmd_set.py:203
msgid "    reminders %(onoff)s"
msgstr ""

#: Mailman/Commands/cmd_set.py:224
msgid "You did not give the correct password"
msgstr ""

#: Mailman/Commands/cmd_set.py:236 Mailman/Commands/cmd_set.py:283
msgid "Bad argument: %(arg)s"
msgstr ""

#: Mailman/Commands/cmd_set.py:241 Mailman/Commands/cmd_set.py:261
msgid "Not authenticated"
msgstr ""

#: Mailman/Commands/cmd_set.py:254
msgid "ack option set"
msgstr ""

#: Mailman/Commands/cmd_set.py:286
msgid "digest option set"
msgstr ""

#: Mailman/Commands/cmd_set.py:301
msgid "delivery enabled"
msgstr ""

#: Mailman/Commands/cmd_set.py:304
msgid "delivery disabled by user"
msgstr ""

#: Mailman/Commands/cmd_set.py:316
msgid "myposts option set"
msgstr ""

#: Mailman/Commands/cmd_set.py:327
msgid "hide option set"
msgstr ""

#: Mailman/Commands/cmd_set.py:339
msgid "duplicates option set"
msgstr ""

#: Mailman/Commands/cmd_set.py:351
msgid "reminder option set"
msgstr ""

#: Mailman/Commands/cmd_stop.py:17
msgid "stop is synonymous with the end command.\n"
msgstr ""

#: Mailman/Commands/cmd_subscribe.py:17
msgid ""
"\n"
"    subscribe [password] [digest|nodigest] [address=<address>]\n"
"        Subscribe to this mailing list.  Your password must be given to\n"
"        unsubscribe or change your options, but if you omit the password, "
"one\n"
"        will be generated for you.  You may be periodically reminded of "
"your\n"
"        password.\n"
"\n"
"        The next argument may be either: `nodigest' or `digest' (no "
"quotes!).\n"
"        If you wish to subscribe an address other than the address you sent\n"
"        this request from, you may specify `address=<address>' (no brackets\n"
"        around the email address, and no quotes!)\n"
msgstr ""

#: Mailman/Commands/cmd_subscribe.py:62
msgid "Bad digest specifier: %(arg)s"
msgstr ""

#: Mailman/Commands/cmd_subscribe.py:84
msgid "No valid address found to subscribe"
msgstr ""

#: Mailman/Commands/cmd_subscribe.py:105
msgid ""
"The email address you supplied is banned from this mailing list.\n"
"If you think this restriction is erroneous, please contact the list\n"
"owners at %(listowner)s."
msgstr ""

#: Mailman/Commands/cmd_subscribe.py:111
msgid ""
"Mailman won't accept the given email address as a valid address.\n"
"(E.g. it must have an @ in it.)"
msgstr ""

#: Mailman/Commands/cmd_subscribe.py:116
msgid ""
"Your subscription is not allowed because\n"
"the email address you gave is insecure."
msgstr ""

#: Mailman/Commands/cmd_subscribe.py:121
msgid "You are already subscribed!"
msgstr ""

#: Mailman/Commands/cmd_subscribe.py:125
msgid "No one can subscribe to the digest of this list!"
msgstr ""

#: Mailman/Commands/cmd_subscribe.py:128
msgid "This list only supports digest subscriptions!"
msgstr ""

#: Mailman/Commands/cmd_subscribe.py:134
msgid ""
"Your subscription request has been forwarded to the list administrator\n"
"at %(listowner)s for review."
msgstr ""

#: Mailman/Commands/cmd_subscribe.py:139
msgid "Subscription request succeeded."
msgstr ""

#: Mailman/Commands/cmd_unsubscribe.py:17
msgid ""
"\n"
"    unsubscribe [password] [address=<address>]\n"
"        Unsubscribe from the mailing list.  If given, your password must "
"match\n"
"        your current password.  If omitted, a confirmation email will be "
"sent\n"
"        to the unsubscribing address. If you wish to unsubscribe an address\n"
"        other than the address you sent this request from, you may specify\n"
"        `address=<address>' (no brackets around the email address, and no\n"
"        quotes!)\n"
msgstr ""

#: Mailman/Commands/cmd_unsubscribe.py:62
msgid "%(address)s is not a member of the %(listname)s mailing list"
msgstr ""

#: Mailman/Commands/cmd_unsubscribe.py:69
msgid ""
"Your unsubscription request has been forwarded to the list administrator "
"for\n"
"approval."
msgstr ""

#: Mailman/Commands/cmd_unsubscribe.py:84
msgid "You gave the wrong password"
msgstr ""

#: Mailman/Commands/cmd_unsubscribe.py:87
msgid "Unsubscription request succeeded."
msgstr ""

#: Mailman/Commands/cmd_who.py:29
msgid ""
"\n"
"    who\n"
"        See everyone who is on this mailing list.\n"
msgstr ""

#: Mailman/Commands/cmd_who.py:34
msgid ""
"\n"
"    who password [address=<address>]\n"
"        See everyone who is on this mailing list.  The roster is limited to\n"
"        list members only, and you must supply your membership password to\n"
"        retrieve it.  If you're posting from an address other than your\n"
"        membership address, specify your membership address with\n"
"        `address=<address>' (no brackets around the email address, and no\n"
"        quotes!)\n"
msgstr ""

#: Mailman/Commands/cmd_who.py:44
msgid ""
"\n"
"    who password\n"
"        See everyone who is on this mailing list.  The roster is limited to\n"
"        list administrators and moderators only; you must supply the list\n"
"        admin or moderator password to retrieve the roster.\n"
msgstr ""

#: Mailman/Commands/cmd_who.py:110
msgid "You are not allowed to retrieve the list membership."
msgstr ""

#: Mailman/Commands/cmd_who.py:116
msgid "This list has no members."
msgstr ""

#: Mailman/Commands/cmd_who.py:129
msgid "Non-digest (regular) members:"
msgstr ""

#: Mailman/Commands/cmd_who.py:132
msgid "Digest members:"
msgstr ""

#: Mailman/Defaults.py:1320
msgid "Catalan"
msgstr ""

#: Mailman/Defaults.py:1321
msgid "Czech"
msgstr ""

#: Mailman/Defaults.py:1322
msgid "Danish"
msgstr ""

#: Mailman/Defaults.py:1323
msgid "German"
msgstr ""

#: Mailman/Defaults.py:1324
msgid "English (USA)"
msgstr ""

#: Mailman/Defaults.py:1325
msgid "Spanish (Spain)"
msgstr ""

#: Mailman/Defaults.py:1326
msgid "Estonian"
msgstr ""

#: Mailman/Defaults.py:1327
msgid "Euskara"
msgstr ""

#: Mailman/Defaults.py:1328
msgid "Finnish"
msgstr ""

#: Mailman/Defaults.py:1329
msgid "French"
msgstr ""

#: Mailman/Defaults.py:1330
msgid "Croatian"
msgstr ""

#: Mailman/Defaults.py:1331
msgid "Hungarian"
msgstr ""

#: Mailman/Defaults.py:1332
msgid "Interlingua"
msgstr ""

#: Mailman/Defaults.py:1333
msgid "Italian"
msgstr ""

#: Mailman/Defaults.py:1334
msgid "Japanese"
msgstr ""

#: Mailman/Defaults.py:1335
msgid "Korean"
msgstr ""

#: Mailman/Defaults.py:1336
msgid "Lithuanian"
msgstr ""

#: Mailman/Defaults.py:1337
msgid "Dutch"
msgstr ""

#: Mailman/Defaults.py:1338
msgid "Norwegian"
msgstr ""

#: Mailman/Defaults.py:1339
msgid "Polish"
msgstr ""

#: Mailman/Defaults.py:1340
msgid "Portuguese"
msgstr ""

#: Mailman/Defaults.py:1341
msgid "Portuguese (Brazil)"
msgstr ""

#: Mailman/Defaults.py:1342
msgid "Romanian"
msgstr ""

#: Mailman/Defaults.py:1343
msgid "Russian"
msgstr ""

#: Mailman/Defaults.py:1344
msgid "Serbian"
msgstr ""

#: Mailman/Defaults.py:1345
msgid "Slovenian"
msgstr ""

#: Mailman/Defaults.py:1346
msgid "Swedish"
msgstr ""

#: Mailman/Defaults.py:1347
msgid "Turkish"
msgstr ""

#: Mailman/Defaults.py:1348
msgid "Ukrainian"
msgstr ""

#: Mailman/Defaults.py:1349
msgid "Chinese (China)"
msgstr ""

#: Mailman/Defaults.py:1350
msgid "Chinese (Taiwan)"
msgstr ""

#: Mailman/Deliverer.py:53
msgid ""
"Note: Since this is a list of mailing lists, administrative\n"
"notices like the password reminder will be sent to\n"
"your membership administrative address, %(addr)s."
msgstr ""

#: Mailman/Deliverer.py:73
msgid " (Digest mode)"
msgstr ""

#: Mailman/Deliverer.py:79
msgid "Welcome to the \"%(realname)s\" mailing list%(digmode)s"
msgstr ""

#: Mailman/Deliverer.py:88
msgid "You have been unsubscribed from the %(realname)s mailing list"
msgstr ""

#: Mailman/Deliverer.py:115
msgid "%(listfullname)s mailing list reminder"
msgstr ""

#: Mailman/Deliverer.py:167 Mailman/Deliverer.py:186
msgid "Hostile subscription attempt detected"
msgstr ""

#: Mailman/Deliverer.py:168
msgid ""
"%(address)s was invited to a different mailing\n"
"list, but in a deliberate malicious attempt they tried to confirm the\n"
"invitation to your list.  We just thought you'd like to know.  No further\n"
"action by you is required."
msgstr ""

#: Mailman/Deliverer.py:187
msgid ""
"You invited %(address)s to your list, but in a\n"
"deliberate malicious attempt, they tried to confirm the invitation to a\n"
"different list.  We just thought you'd like to know.  No further action by "
"you\n"
"is required."
msgstr ""

#: Mailman/Deliverer.py:220
msgid "%(listname)s mailing list probe message"
msgstr ""

#: Mailman/Errors.py:114
msgid "For some unknown reason"
msgstr ""

#: Mailman/Errors.py:120 Mailman/Errors.py:143
msgid "Your message was rejected"
msgstr ""

#: Mailman/Gui/Archive.py:25
msgid "Archiving Options"
msgstr ""

#: Mailman/Gui/Archive.py:31
msgid "List traffic archival policies."
msgstr ""

#: Mailman/Gui/Archive.py:34
msgid "Archive messages?"
msgstr ""

#: Mailman/Gui/Archive.py:36
msgid "private"
msgstr ""

#: Mailman/Gui/Archive.py:36
msgid "public"
msgstr ""

#: Mailman/Gui/Archive.py:37
msgid "Is archive file source for public or private archival?"
msgstr ""

#: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78
msgid "Monthly"
msgstr ""

#: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78
msgid "Quarterly"
msgstr ""

#: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78
msgid "Yearly"
msgstr ""

#: Mailman/Gui/Archive.py:41 Mailman/Gui/Digest.py:79
msgid "Daily"
msgstr ""

#: Mailman/Gui/Archive.py:41 Mailman/Gui/Digest.py:79
msgid "Weekly"
msgstr ""

#: Mailman/Gui/Archive.py:43
msgid "How often should a new archive volume be started?"
msgstr ""

#: Mailman/Gui/Autoresponse.py:31
msgid "Auto-responder"
msgstr ""

#: Mailman/Gui/Autoresponse.py:39
msgid ""
"Auto-responder characteristics.<p>\n"
"\n"
"In the text fields below, string interpolation is performed with\n"
"the following key/value substitutions:\n"
"<p><ul>\n"
"    <li><b>listname</b> - <em>gets the name of the mailing list</em>\n"
"    <li><b>listurl</b> - <em>gets the list's listinfo URL</em>\n"
"    <li><b>requestemail</b> - <em>gets the list's -request address</em>\n"
"    <li><b>owneremail</b> - <em>gets the list's -owner address</em>\n"
"</ul>\n"
"\n"
"<p>For each text field, you can either enter the text directly into the "
"text\n"
"box, or you can specify a file on your local system to upload as the text."
msgstr ""

#: Mailman/Gui/Autoresponse.py:55
msgid ""
"Should Mailman send an auto-response to mailing list\n"
"             posters?"
msgstr ""

#: Mailman/Gui/Autoresponse.py:60
msgid "Auto-response text to send to mailing list posters."
msgstr ""

#: Mailman/Gui/Autoresponse.py:63
msgid ""
"Should Mailman send an auto-response to emails sent to the\n"
"             -owner address?"
msgstr ""

#: Mailman/Gui/Autoresponse.py:68
msgid "Auto-response text to send to -owner emails."
msgstr ""

#: Mailman/Gui/Autoresponse.py:71
msgid "Yes, w/discard"
msgstr ""

#: Mailman/Gui/Autoresponse.py:71
msgid "Yes, w/forward"
msgstr ""

#: Mailman/Gui/Autoresponse.py:72
msgid ""
"Should Mailman send an auto-response to emails sent to the\n"
"             -request address?  If you choose yes, decide whether you want\n"
"             Mailman to discard the original email, or forward it on to the\n"
"             system as a normal mail command."
msgstr ""

#: Mailman/Gui/Autoresponse.py:79
msgid "Auto-response text to send to -request emails."
msgstr ""

#: Mailman/Gui/Autoresponse.py:82
msgid ""
"Number of days between auto-responses to either the mailing\n"
"             list or -request/-owner address from the same poster.  Set to\n"
"             zero (or negative) for no grace period (i.e. auto-respond to\n"
"             every message)."
msgstr ""

#: Mailman/Gui/Bounce.py:26
msgid "Bounce processing"
msgstr ""

#: Mailman/Gui/Bounce.py:32
msgid ""
"These policies control the automatic bounce processing system\n"
"            in Mailman.  Here's an overview of how it works.\n"
"\n"
"            <p>When a bounce is received, Mailman tries to extract two "
"pieces\n"
"            of information from the message: the address of the member the\n"
"            message was intended for, and the severity of the problem "
"causing\n"
"            the bounce.  The severity can be either <em>hard</em> or\n"
"            <em>soft</em> meaning either a fatal error occurred, or a\n"
"            transient error occurred.  When in doubt, a hard severity is "
"used.\n"
"\n"
"            <p>If no member address can be extracted from the bounce, then "
"the\n"
"            bounce is usually discarded.  Otherwise, each member is assigned "
"a\n"
"            <em>bounce score</em> and every time we encounter a bounce from\n"
"            this member we increment the score.  Hard bounces increment by "
"1\n"
"            while soft bounces increment by 0.5.  We only increment the "
"bounce\n"
"            score once per day, so even if we receive ten hard bounces from "
"a\n"
"            member per day, their score will increase by only 1 for that "
"day.\n"
"\n"
"            <p>When a member's bounce score is greater than the\n"
"            <a href=\"?VARHELP=bounce/bounce_score_threshold\">bounce score\n"
"            threshold</a>, the subscription is disabled.  Once disabled, "
"the\n"
"            member will not receive any postings from the list until their\n"
"            membership is explicitly re-enabled (either by the list\n"
"            administrator or the user).  However, they will receive "
"occasional\n"
"            reminders that their membership has been disabled, and these\n"
"            reminders will include information about how to re-enable their\n"
"            membership.\n"
"\n"
"            <p>You can control both the\n"
"            <a href=\"?VARHELP=bounce/bounce_you_are_disabled_warnings"
"\">number\n"
"            of reminders</a> the member will receive and the\n"
"            <a href=\"?VARHELP=bounce/"
"bounce_you_are_disabled_warnings_interval\"\n"
"            >frequency</a> with which these reminders are sent.\n"
"\n"
"            <p>There is one other important configuration variable; after a\n"
"            certain period of time -- during which no bounces from the "
"member\n"
"            are received -- the bounce information is\n"
"            <a href=\"?VARHELP=bounce/bounce_info_stale_after\">considered\n"
"            stale</a> and discarded.  Thus by adjusting this value, and the\n"
"            score threshold, you can control how quickly bouncing members "
"are\n"
"            disabled.  You should tune both of these to the frequency and\n"
"            traffic volume of your list."
msgstr ""

#: Mailman/Gui/Bounce.py:75
msgid "Bounce detection sensitivity"
msgstr ""

#: Mailman/Gui/Bounce.py:78
msgid "Should Mailman perform automatic bounce processing?"
msgstr ""

#: Mailman/Gui/Bounce.py:79
msgid ""
"By setting this value to <em>No</em>, you disable all\n"
"             automatic bounce processing for this list, however bounce\n"
"             messages will still be discarded so that the list "
"administrator\n"
"             isn't inundated with them."
msgstr ""

#: Mailman/Gui/Bounce.py:85
msgid ""
"The maximum member bounce score before the member's\n"
"             subscription is disabled.  This value can be a floating point\n"
"             number."
msgstr ""

#: Mailman/Gui/Bounce.py:88
msgid ""
"Each subscriber is assigned a bounce score, as a floating\n"
"             point number.  Whenever Mailman receives a bounce from a list\n"
"             member, that member's score is incremented.  Hard bounces "
"(fatal\n"
"             errors) increase the score by 1, while soft bounces (temporary\n"
"             errors) increase the score by 0.5.  Only one bounce per day\n"
"             counts against a member's score, so even if 10 bounces are\n"
"             received for a member on the same day, their score will "
"increase\n"
"             by just 1.\n"
"\n"
"             This variable describes the upper limit for a member's bounce\n"
"             score, above which they are automatically disabled, but not\n"
"             removed from the mailing list."
msgstr ""

#: Mailman/Gui/Bounce.py:102
msgid ""
"The number of days after which a member's bounce information\n"
"             is discarded, if no new bounces have been received in the\n"
"             interim.  This value must be an integer."
msgstr ""

#: Mailman/Gui/Bounce.py:107
msgid ""
"How many <em>Your Membership Is Disabled</em> warnings a\n"
"             disabled member should get before their address is removed "
"from\n"
"             the mailing list.  Set to 0 to immediately remove an address "
"from\n"
"             the list once their bounce score exceeds the threshold.  This\n"
"             value must be an integer."
msgstr ""

#: Mailman/Gui/Bounce.py:114
msgid ""
"The number of days between sending the <em>Your Membership\n"
"             Is Disabled</em> warnings.  This value must be an integer."
msgstr ""

#: Mailman/Gui/Bounce.py:117 Mailman/Gui/General.py:262
msgid "Notifications"
msgstr ""

#: Mailman/Gui/Bounce.py:121
msgid ""
"Should Mailman send you, the list owner, any bounce messages\n"
"             that failed to be detected by the bounce processor?  <em>Yes</"
"em>\n"
"             is recommended."
msgstr ""

#: Mailman/Gui/Bounce.py:124
msgid ""
"While Mailman's bounce detector is fairly robust, it's\n"
"             impossible to detect every bounce format in the world.  You\n"
"             should keep this variable set to <em>Yes</em> for two reasons: "
"1)\n"
"             If this really is a permanent bounce from one of your members,\n"
"             you should probably manually remove them from your list, and "
"2)\n"
"             you might want to send the message on to the Mailman "
"developers\n"
"             so that this new format can be added to its known set.\n"
"\n"
"             <p>If you really can't be bothered, then set this variable to\n"
"             <em>No</em> and all non-detected bounces will be discarded\n"
"             without further processing.\n"
"\n"
"             <p><b>Note:</b> This setting will also affect all messages "
"sent\n"
"             to your list's -admin address.  This address is deprecated and\n"
"             should never be used, but some people may still send mail to "
"this\n"
"             address.  If this happens, and this variable is set to\n"
"             <em>No</em> those messages too will get discarded.  You may "
"want\n"
"             to set up an\n"
"             <a href=\"?VARHELP=autoreply/autoresponse_admin_text"
"\">autoresponse\n"
"             message</a> for email to the -owner and -admin address."
msgstr ""

#: Mailman/Gui/Bounce.py:147
msgid ""
"Should Mailman notify you, the list owner, when bounces\n"
"             cause a member's subscription to be disabled?"
msgstr ""

#: Mailman/Gui/Bounce.py:149
msgid ""
"By setting this value to <em>No</em>, you turn off\n"
"             notification messages that are normally sent to the list "
"owners\n"
"             when a member's delivery is disabled due to excessive bounces.\n"
"             An attempt to notify the member will always be made."
msgstr ""

#: Mailman/Gui/Bounce.py:156
msgid ""
"Should Mailman notify you, the list owner, when bounces\n"
"             cause a member to be unsubscribed?"
msgstr ""

#: Mailman/Gui/Bounce.py:158
msgid ""
"By setting this value to <em>No</em>, you turn off\n"
"             notification messages that are normally sent to the list "
"owners\n"
"             when a member is unsubscribed due to excessive bounces.  An\n"
"             attempt to notify the member will always be made."
msgstr ""

#: Mailman/Gui/Bounce.py:185
msgid ""
"Bad value for <a href=\"?VARHELP=bounce/%(property)s\"\n"
"                >%(property)s</a>: %(val)s"
msgstr ""

#: Mailman/Gui/ContentFilter.py:30
msgid "Content&nbsp;filtering"
msgstr ""

#: Mailman/Gui/ContentFilter.py:37
msgid "Forward to List Owner"
msgstr ""

#: Mailman/Gui/ContentFilter.py:39
msgid "Preserve"
msgstr ""

#: Mailman/Gui/ContentFilter.py:42
msgid ""
"Policies concerning the content of list traffic.\n"
"\n"
"            <p>Content filtering works like this: when a message is\n"
"            received by the list and you have enabled content filtering, "
"the\n"
"            individual attachments are first compared to the\n"
"            <a href=\"?VARHELP=contentfilter/filter_mime_types\">filter\n"
"            types</a>.  If the attachment type matches an entry in the "
"filter\n"
"            types, it is discarded.\n"
"\n"
"            <p>Then, if there are <a\n"
"            href=\"?VARHELP=contentfilter/pass_mime_types\">pass types</a>\n"
"            defined, any attachment type that does <em>not</em> match a\n"
"            pass type is also discarded.  If there are no pass types "
"defined,\n"
"            this check is skipped.\n"
"\n"
"            <p>After this initial filtering, any <tt>multipart</tt>\n"
"            attachments that are empty are removed.  If the outer message "
"is\n"
"            left empty after this filtering, then the whole message is\n"
"            discarded.\n"
"\n"
"            <p> Then, each <tt>multipart/alternative</tt> section will\n"
"            be replaced by just the first alternative that is non-empty "
"after\n"
"            filtering if\n"
"            <a href=\"?VARHELP=contentfilter/collapse_alternatives\"\n"
"            >collapse_alternatives</a> is enabled.\n"
"\n"
"            <p>Finally, any <tt>text/html</tt> parts that are left in the\n"
"            message may be converted to <tt>text/plain</tt> if\n"
"            <a href=\"?VARHELP=contentfilter/convert_html_to_plaintext\"\n"
"            >convert_html_to_plaintext</a> is enabled and the site is\n"
"            configured to allow these conversions."
msgstr ""

#: Mailman/Gui/ContentFilter.py:75
msgid ""
"Should Mailman filter the content of list traffic according\n"
"             to the settings below?"
msgstr ""

#: Mailman/Gui/ContentFilter.py:79
msgid ""
"Remove message attachments that have a matching content\n"
"             type."
msgstr ""

#: Mailman/Gui/ContentFilter.py:82
msgid ""
"Use this option to remove each message attachment that\n"
"             matches one of these content types.  Each line should contain "
"a\n"
"             string naming a MIME <tt>type/subtype</tt>,\n"
"             e.g. <tt>image/gif</tt>.  Leave off the subtype to remove all\n"
"             parts with a matching major content type, e.g. <tt>image</tt>.\n"
"\n"
"             <p>Blank lines are ignored.\n"
"\n"
"             <p>See also <a href=\"?VARHELP=contentfilter/pass_mime_types\"\n"
"             >pass_mime_types</a> for a content type whitelist."
msgstr ""

#: Mailman/Gui/ContentFilter.py:94
msgid ""
"Remove message attachments that don't have a matching\n"
"             content type.  Leave this field blank to skip this filter\n"
"             test."
msgstr ""

#: Mailman/Gui/ContentFilter.py:98
msgid ""
"Use this option to remove each message attachment that does\n"
"             not have a matching content type.  Requirements and formats "
"are\n"
"             exactly like <a href=\"?VARHELP=contentfilter/filter_mime_types"
"\"\n"
"             >filter_mime_types</a>.\n"
"\n"
"             <p><b>Note:</b> if you add entries to this list but don't add\n"
"             <tt>multipart</tt> to this list, any messages with attachments\n"
"             will be rejected by the pass filter."
msgstr ""

#: Mailman/Gui/ContentFilter.py:108
msgid ""
"Remove message attachments that have a matching filename\n"
"             extension."
msgstr ""

#: Mailman/Gui/ContentFilter.py:112
msgid ""
"Remove message attachments that don't have a matching\n"
"             filename extension.  Leave this field blank to skip this "
"filter\n"
"             test."
msgstr ""

#: Mailman/Gui/ContentFilter.py:117
msgid ""
"Should Mailman collapse multipart/alternative to its\n"
"             first part content?"
msgstr ""

#: Mailman/Gui/ContentFilter.py:121
msgid ""
"Should Mailman convert <tt>text/html</tt> parts to plain\n"
"             text?  This conversion happens after MIME attachments have "
"been\n"
"             stripped."
msgstr ""

#: Mailman/Gui/ContentFilter.py:127
msgid ""
"Action to take when a message matches the content filtering\n"
"             rules."
msgstr ""

#: Mailman/Gui/ContentFilter.py:130
msgid ""
"One of these actions is taken when the message matches one of\n"
"             the content filtering rules, meaning, the top-level\n"
"             content type matches one of the <a\n"
"             href=\"?VARHELP=contentfilter/filter_mime_types\"\n"
"             >filter_mime_types</a>, or the top-level content type does\n"
"             <strong>not</strong> match one of the\n"
"             <a href=\"?VARHELP=contentfilter/pass_mime_types\"\n"
"             >pass_mime_types</a>, or if after filtering the subparts of "
"the\n"
"             message, the message ends up empty.\n"
"\n"
"             <p>Note this action is not taken if after filtering the "
"message\n"
"             still contains content.  In that case the message is always\n"
"             forwarded on to the list membership.\n"
"\n"
"             <p>When messages are discarded, a log entry is written\n"
"             containing the Message-ID of the discarded message.  When\n"
"             messages are rejected or forwarded to the list owner, a reason\n"
"             for the rejection is included in the bounce message to the\n"
"             original author.  When messages are preserved, they are saved "
"in\n"
"             a special queue directory on disk for the site administrator "
"to\n"
"             view (and possibly rescue) but otherwise discarded.  This last\n"
"             option is only available if enabled by the site\n"
"             administrator."
msgstr ""

#: Mailman/Gui/ContentFilter.py:171
msgid "Bad MIME type ignored: %(spectype)s"
msgstr ""

#: Mailman/Gui/Digest.py:36
msgid "Digest options"
msgstr ""

#: Mailman/Gui/Digest.py:44
msgid "Batched-delivery digest characteristics."
msgstr ""

#: Mailman/Gui/Digest.py:47
msgid "Can list members choose to receive list traffic bunched in digests?"
msgstr ""

#: Mailman/Gui/Digest.py:51
msgid "Digest"
msgstr ""

#: Mailman/Gui/Digest.py:51
msgid "Regular"
msgstr ""

#: Mailman/Gui/Digest.py:52
msgid "Which delivery mode is the default for new users?"
msgstr ""

#: Mailman/Gui/Digest.py:55
msgid "MIME"
msgstr ""

#: Mailman/Gui/Digest.py:55
msgid "Plain"
msgstr ""

#: Mailman/Gui/Digest.py:56
msgid "When receiving digests, which format is default?"
msgstr ""

#: Mailman/Gui/Digest.py:59
msgid "How big in Kb should a digest be before it gets sent out?"
msgstr ""

#: Mailman/Gui/Digest.py:63
msgid ""
"Should a digest be dispatched daily when the size threshold isn't reached?"
msgstr ""

#: Mailman/Gui/Digest.py:67
msgid "Header added to every digest"
msgstr ""

#: Mailman/Gui/Digest.py:68
msgid ""
"Text attached (as an initial message, before the table of contents) to the "
"top of digests. "
msgstr ""

#: Mailman/Gui/Digest.py:73
msgid "Footer added to every digest"
msgstr ""

#: Mailman/Gui/Digest.py:74
msgid "Text attached (as a final message) to the bottom of digests. "
msgstr ""

#: Mailman/Gui/Digest.py:80
msgid "How often should a new digest volume be started?"
msgstr ""

#: Mailman/Gui/Digest.py:81
msgid ""
"When a new digest volume is started, the volume number is\n"
"             incremented and the issue number is reset to 1."
msgstr ""

#: Mailman/Gui/Digest.py:85
msgid "Should Mailman start a new digest volume?"
msgstr ""

#: Mailman/Gui/Digest.py:86
msgid ""
"Setting this option instructs Mailman to start a new volume\n"
"             with the next digest sent out."
msgstr ""

#: Mailman/Gui/Digest.py:90
msgid ""
"Should Mailman send the next digest right now, if it is not\n"
"             empty?"
msgstr ""

#: Mailman/Gui/Digest.py:145
msgid ""
"The next digest will be sent as volume\n"
"            %(volume)s, number %(number)s"
msgstr ""

#: Mailman/Gui/Digest.py:150
msgid "A digest has been sent."
msgstr ""

#: Mailman/Gui/Digest.py:152
msgid "There was no digest to send."
msgstr ""

#: Mailman/Gui/GUIBase.py:156
msgid "Invalid value for variable: %(property)s"
msgstr ""

#: Mailman/Gui/GUIBase.py:160
msgid "Bad email address for option %(property)s: %(val)s"
msgstr ""

#: Mailman/Gui/GUIBase.py:186
msgid ""
"The following illegal substitution variables were\n"
"                found in the <code>%(property)s</code> string:\n"
"                <code>%(bad)s</code>\n"
"                <p>Your list may not operate properly until you correct "
"this\n"
"                problem."
msgstr ""

#: Mailman/Gui/GUIBase.py:200
msgid ""
"Your <code>%(property)s</code> string appeared to\n"
"                    have some correctable problems in its new value.\n"
"                    The fixed value will be used instead.  Please\n"
"                    double check that this is what you intended.\n"
"                    "
msgstr ""

#: Mailman/Gui/General.py:33
msgid "General Options"
msgstr ""

#: Mailman/Gui/General.py:47
msgid "Conceal the member's address"
msgstr ""

#: Mailman/Gui/General.py:48
msgid "Acknowledge the member's posting"
msgstr ""

#: Mailman/Gui/General.py:49
msgid "Do not send a copy of a member's own post"
msgstr ""

#: Mailman/Gui/General.py:51
msgid "Filter out duplicate messages to list members (if possible)"
msgstr ""

#: Mailman/Gui/General.py:58
msgid ""
"Fundamental list characteristics, including descriptive\n"
"            info and basic behaviors."
msgstr ""

#: Mailman/Gui/General.py:61
msgid "General list personality"
msgstr ""

#: Mailman/Gui/General.py:64
msgid "The public name of this list (make case-changes only)."
msgstr ""

#: Mailman/Gui/General.py:65
msgid ""
"The capitalization of this name can be changed to make it\n"
"             presentable in polite company as a proper noun, or to make an\n"
"             acronym part all upper case, etc.  However, the name will be\n"
"             advertised as the email address (e.g., in subscribe "
"confirmation\n"
"             notices), so it should <em>not</em> be otherwise altered.  "
"(Email\n"
"             addresses are not case sensitive, but they are sensitive to\n"
"             almost everything else :-)"
msgstr ""

#: Mailman/Gui/General.py:74
msgid ""
"The list administrator email addresses.  Multiple\n"
"             administrator addresses, each on separate line is okay."
msgstr ""

#: Mailman/Gui/General.py:77
msgid ""
"There are two ownership roles associated with each mailing\n"
"             list.  The <em>list administrators</em> are the people who "
"have\n"
"             ultimate control over all parameters of this mailing list.  "
"They\n"
"             are able to change any list configuration variable available\n"
"             through these administration web pages.\n"
"\n"
"             <p>The <em>list moderators</em> have more limited permissions;\n"
"             they are not able to change any list configuration variable, "
"but\n"
"             they are allowed to tend to pending administration requests,\n"
"             including approving or rejecting held subscription requests, "
"and\n"
"             disposing of held postings.  Of course, the <em>list\n"
"             administrators</em> can also tend to pending requests.\n"
"\n"
"             <p>In order to split the list ownership duties into\n"
"             administrators and moderators, you must\n"
"             <a href=\"passwords\">set a separate moderator password</a>,\n"
"             and also provide the <a href=\"?VARHELP=general/moderator"
"\">email\n"
"             addresses of the list moderators</a>.  Note that the field you\n"
"             are changing here specifies the list administrators."
msgstr ""

#: Mailman/Gui/General.py:98
msgid ""
"The list moderator email addresses.  Multiple\n"
"             moderator addresses, each on separate line is okay."
msgstr ""

#: Mailman/Gui/General.py:101
msgid ""
"There are two ownership roles associated with each mailing\n"
"             list.  The <em>list administrators</em> are the people who "
"have\n"
"             ultimate control over all parameters of this mailing list.  "
"They\n"
"             are able to change any list configuration variable available\n"
"             through these administration web pages.\n"
"\n"
"             <p>The <em>list moderators</em> have more limited permissions;\n"
"             they are not able to change any list configuration variable, "
"but\n"
"             they are allowed to tend to pending administration requests,\n"
"             including approving or rejecting held subscription requests, "
"and\n"
"             disposing of held postings.  Of course, the <em>list\n"
"             administrators</em> can also tend to pending requests.\n"
"\n"
"             <p>In order to split the list ownership duties into\n"
"             administrators and moderators, you must\n"
"             <a href=\"passwords\">set a separate moderator password</a>,\n"
"             and also provide the email addresses of the list moderators in\n"
"             this section.  Note that the field you are changing here\n"
"             specifies the list moderators."
msgstr ""

#: Mailman/Gui/General.py:122
msgid "A terse phrase identifying this list."
msgstr ""

#: Mailman/Gui/General.py:124
msgid ""
"This description is used when the mailing list is listed with\n"
"                other mailing lists, or in headers, and so forth.  It "
"should\n"
"                be as succinct as you can get it, while still identifying "
"what\n"
"                the list is."
msgstr ""

#: Mailman/Gui/General.py:130
msgid ""
"An introductory description - a few paragraphs - about the\n"
"             list.  It will be included, as html, at the top of the "
"listinfo\n"
"             page.  Carriage returns will end a paragraph - see the details\n"
"             for more info."
msgstr ""

#: Mailman/Gui/General.py:134
msgid ""
"The text will be treated as html <em>except</em> that\n"
"             newlines will be translated to &lt;br&gt; - so you can use "
"links,\n"
"             preformatted text, etc, but don't put in carriage returns "
"except\n"
"             where you mean to separate paragraphs.  And review your changes "
"-\n"
"             bad html (like some unterminated HTML constructs) can prevent\n"
"             display of the entire listinfo page."
msgstr ""

#: Mailman/Gui/General.py:142
msgid "Prefix for subject line of list postings."
msgstr ""

#: Mailman/Gui/General.py:143
msgid ""
"This text will be prepended to subject lines of messages\n"
"             posted to the list, to distinguish mailing list messages in\n"
"             mailbox summaries.  Brevity is premium here, it's ok to "
"shorten\n"
"             long mailing list names to something more concise, as long as "
"it\n"
"             still identifies the mailing list.\n"
"             You can also add a sequential number by %%d substitution\n"
"             directive. eg.; [listname %%d] -> [listname 123]\n"
"                            (listname %%05d) -> (listname 00123)\n"
"             "
msgstr ""

#: Mailman/Gui/General.py:154
msgid ""
"Hide the sender of a message, replacing it with the list\n"
"             address (Removes From, Sender and Reply-To fields)"
msgstr ""

#: Mailman/Gui/General.py:157
msgid "<tt>Reply-To:</tt> header munging"
msgstr ""

#: Mailman/Gui/General.py:160
msgid ""
"Should any existing <tt>Reply-To:</tt> header found in the\n"
"             original message be stripped?  If so, this will be done\n"
"             regardless of whether an explict <tt>Reply-To:</tt> header is\n"
"             added by Mailman or not."
msgstr ""

#: Mailman/Gui/General.py:166
msgid "Explicit address"
msgstr ""

#: Mailman/Gui/General.py:166
msgid "Poster"
msgstr ""

#: Mailman/Gui/General.py:166
msgid "This list"
msgstr ""

#: Mailman/Gui/General.py:167
msgid ""
"Where are replies to list messages directed?\n"
"             <tt>Poster</tt> is <em>strongly</em> recommended for most "
"mailing\n"
"             lists."
msgstr ""

#: Mailman/Gui/General.py:172
msgid ""
"This option controls what Mailman does to the\n"
"             <tt>Reply-To:</tt> header in messages flowing through this\n"
"             mailing list.  When set to <em>Poster</em>, no <tt>Reply-To:</"
"tt>\n"
"             header is added by Mailman, although if one is present in the\n"
"             original message, it is not stripped.  Setting this value to\n"
"             either <em>This list</em> or <em>Explicit address</em> causes\n"
"             Mailman to insert a specific <tt>Reply-To:</tt> header in all\n"
"             messages, overriding the header in the original message if\n"
"             necessary (<em>Explicit address</em> inserts the value of <a\n"
"             href=\"?VARHELP=general/reply_to_address\">reply_to_address</"
"a>).\n"
"\n"
"             <p>There are many reasons not to introduce or override the\n"
"             <tt>Reply-To:</tt> header.  One is that some posters depend on\n"
"             their own <tt>Reply-To:</tt> settings to convey their valid\n"
"             return address.  Another is that modifying <tt>Reply-To:</tt>\n"
"             makes it much more difficult to send private replies.  See <a\n"
"             href=\"http://www.unicom.com/pw/reply-to-harmful.html\">`Reply-"
"To'\n"
"             Munging Considered Harmful</a> for a general discussion of "
"this\n"
"             issue.  See <a\n"
"             href=\"http://www.metasystema.net/essays/reply-to.mhtml\">Reply-"
"To\n"
"             Munging Considered Useful</a> for a dissenting opinion.\n"
"\n"
"             <p>Some mailing lists have restricted posting privileges, with "
"a\n"
"             parallel list devoted to discussions.  Examples are `patches' "
"or\n"
"             `checkin' lists, where software changes are posted by a "
"revision\n"
"             control system, but discussion about the changes occurs on a\n"
"             developers mailing list.  To support these types of mailing\n"
"             lists, select <tt>Explicit address</tt> and set the\n"
"             <tt>Reply-To:</tt> address below to point to the parallel\n"
"             list."
msgstr ""

#: Mailman/Gui/General.py:204
msgid "Explicit <tt>Reply-To:</tt> header."
msgstr ""

#: Mailman/Gui/General.py:206
msgid ""
"This is the address set in the <tt>Reply-To:</tt> header\n"
"             when the <a\n"
"             href=\"?VARHELP=general/reply_goes_to_list"
"\">reply_goes_to_list</a>\n"
"             option is set to <em>Explicit address</em>.\n"
"\n"
"             <p>There are many reasons not to introduce or override the\n"
"             <tt>Reply-To:</tt> header.  One is that some posters depend on\n"
"             their own <tt>Reply-To:</tt> settings to convey their valid\n"
"             return address.  Another is that modifying <tt>Reply-To:</tt>\n"
"             makes it much more difficult to send private replies.  See <a\n"
"             href=\"http://www.unicom.com/pw/reply-to-harmful.html\">`Reply-"
"To'\n"
"             Munging Considered Harmful</a> for a general discussion of "
"this\n"
"             issue.  See <a\n"
"             href=\"http://www.metasystema.net/essays/reply-to.mhtml\">Reply-"
"To\n"
"             Munging Considered Useful</a> for a dissenting opinion.\n"
"\n"
"             <p>Some mailing lists have restricted posting privileges, with "
"a\n"
"             parallel list devoted to discussions.  Examples are `patches' "
"or\n"
"             `checkin' lists, where software changes are posted by a "
"revision\n"
"             control system, but discussion about the changes occurs on a\n"
"             developers mailing list.  To support these types of mailing\n"
"             lists, specify the explicit <tt>Reply-To:</tt> address here.  "
"You\n"
"             must also specify <tt>Explicit address</tt> in the\n"
"             <tt>reply_goes_to_list</tt>\n"
"             variable.\n"
"\n"
"             <p>Note that if the original message contains a\n"
"             <tt>Reply-To:</tt> header, it will not be changed."
msgstr ""

#: Mailman/Gui/General.py:235
msgid "Umbrella list settings"
msgstr ""

#: Mailman/Gui/General.py:238
msgid ""
"Send password reminders to, eg, \"-owner\" address instead of\n"
"             directly to user."
msgstr ""

#: Mailman/Gui/General.py:241
msgid ""
"Set this to yes when this list is intended to cascade only\n"
"             to other mailing lists.  When set, meta notices like\n"
"             confirmations and password reminders will be directed to an\n"
"             address derived from the member's address - it will have the\n"
"             value of \"umbrella_member_suffix\" appended to the member's\n"
"             account name."
msgstr ""

#: Mailman/Gui/General.py:249
msgid ""
"Suffix for use when this list is an umbrella for other\n"
"             lists, according to setting of previous \"umbrella_list\"\n"
"             setting."
msgstr ""

#: Mailman/Gui/General.py:253
msgid ""
"When \"umbrella_list\" is set to indicate that this list has\n"
"             other mailing lists as members, then administrative notices "
"like\n"
"             confirmations and password reminders need to not be sent to "
"the\n"
"             member list addresses, but rather to the owner of those member\n"
"             lists.  In that case, the value of this setting is appended to\n"
"             the member's account name for such notices.  `-owner' is the\n"
"             typical choice.  This setting has no effect when \"umbrella_list"
"\"\n"
"             is \"No\"."
msgstr ""

#: Mailman/Gui/General.py:265
msgid "Send monthly password reminders?"
msgstr ""

#: Mailman/Gui/General.py:267
msgid ""
"Turn this on if you want password reminders to be sent once\n"
"             per month to your members.  Note that members may disable "
"their\n"
"             own individual password reminders."
msgstr ""

#: Mailman/Gui/General.py:272
msgid ""
"List-specific text prepended to new-subscriber welcome\n"
"             message"
msgstr ""

#: Mailman/Gui/General.py:275
msgid ""
"This value, if any, will be added to the front of the\n"
"             new-subscriber welcome message.  The rest of the welcome "
"message\n"
"             already describes the important addresses and URLs for the\n"
"             mailing list, so you don't need to include any of that kind of\n"
"             stuff here.  This should just contain mission-specific kinds "
"of\n"
"             things, like etiquette policies or team orientation, or that "
"kind\n"
"             of thing.\n"
"\n"
"             <p>Note that this text will be wrapped, according to the\n"
"             following rules:\n"
"             <ul><li>Each paragraph is filled so that no line is longer "
"than\n"
"                     70 characters.\n"
"                 <li>Any line that begins with whitespace is not filled.\n"
"                 <li>A blank line separates paragraphs.\n"
"             </ul>"
msgstr ""

#: Mailman/Gui/General.py:292
msgid "Send welcome message to newly subscribed members?"
msgstr ""

#: Mailman/Gui/General.py:293
msgid ""
"Turn this off only if you plan on subscribing people manually\n"
"             and don't want them to know that you did so.  This option is "
"most\n"
"             useful for transparently migrating lists from some other "
"mailing\n"
"             list manager to Mailman."
msgstr ""

#: Mailman/Gui/General.py:299
msgid ""
"Text sent to people leaving the list.  If empty, no special\n"
"             text will be added to the unsubscribe message."
msgstr ""

#: Mailman/Gui/General.py:303
msgid "Send goodbye message to members when they are unsubscribed?"
msgstr ""

#: Mailman/Gui/General.py:306
msgid ""
"Should the list moderators get immediate notice of new\n"
"             requests, as well as daily notices about collected ones?"
msgstr ""

#: Mailman/Gui/General.py:309
msgid ""
"List moderators (and list administrators) are sent daily\n"
"             reminders of requests pending approval, like subscriptions to "
"a\n"
"             moderated list, or postings that are being held for one reason "
"or\n"
"             another.  Setting this option causes notices to be sent\n"
"             immediately on the arrival of new requests as well."
msgstr ""

#: Mailman/Gui/General.py:316
msgid ""
"Should administrator get notices of subscribes and\n"
"             unsubscribes?"
msgstr ""

#: Mailman/Gui/General.py:321
msgid "Send mail to poster when their posting is held for approval?"
msgstr ""

#: Mailman/Gui/General.py:324
msgid "Additional settings"
msgstr ""

#: Mailman/Gui/General.py:327
msgid "Emergency moderation of all list traffic."
msgstr ""

#: Mailman/Gui/General.py:328
msgid ""
"When this option is enabled, all list traffic is emergency\n"
"             moderated, i.e. held for moderation.  Turn this option on when\n"
"             your list is experiencing a flamewar and you want a cooling "
"off\n"
"             period."
msgstr ""

#: Mailman/Gui/General.py:340
msgid ""
"Default options for new members joining this list.<input\n"
"             type=\"hidden\" name=\"new_member_options\" value=\"ignore\">"
msgstr ""

#: Mailman/Gui/General.py:343
msgid ""
"When a new member is subscribed to this list, their initial\n"
"             set of options is taken from the this variable's setting."
msgstr ""

#: Mailman/Gui/General.py:347
msgid ""
"(Administrivia filter) Check postings and intercept ones\n"
"             that seem to be administrative requests?"
msgstr ""

#: Mailman/Gui/General.py:350
msgid ""
"Administrivia tests will check postings to see whether it's\n"
"             really meant as an administrative request (like subscribe,\n"
"             unsubscribe, etc), and will add it to the the administrative\n"
"             requests queue, notifying the administrator of the new "
"request,\n"
"             in the process."
msgstr ""

#: Mailman/Gui/General.py:357
msgid ""
"Maximum length in kilobytes (KB) of a message body.  Use 0\n"
"             for no limit."
msgstr ""

#: Mailman/Gui/General.py:361
msgid "Host name this list prefers for email."
msgstr ""

#: Mailman/Gui/General.py:363
msgid ""
"The \"host_name\" is the preferred name for email to\n"
"             mailman-related addresses on this host, and generally should "
"be\n"
"             the mail host's exchanger address, if any.  This setting can "
"be\n"
"             useful for selecting among alternative names of a host that "
"has\n"
"             multiple addresses."
msgstr ""

#: Mailman/Gui/General.py:375
msgid ""
"Should messages from this mailing list include the\n"
"                 <a href=\"http://www.faqs.org/rfcs/rfc2369.html\">RFC 2369</"
"a>\n"
"                 (i.e. <tt>List-*</tt>) headers?  <em>Yes</em> is highly\n"
"                 recommended."
msgstr ""

#: Mailman/Gui/General.py:380
msgid ""
"RFC 2369 defines a set of List-* headers that are\n"
"                 normally added to every message sent to the list "
"membership.\n"
"                 These greatly aid end-users who are using standards "
"compliant\n"
"                 mail readers.  They should normally always be enabled.\n"
"\n"
"                 <p>However, not all mail readers are standards compliant "
"yet,\n"
"                 and if you have a large number of members who are using\n"
"                 non-compliant mail readers, they may be annoyed at these\n"
"                 headers.  You should first try to educate your members as "
"to\n"
"                 why these headers exist, and how to hide them in their "
"mail\n"
"                 clients.  As a last resort you can disable these headers, "
"but\n"
"                 this is not recommended (and in fact, your ability to "
"disable\n"
"                 these headers may eventually go away)."
msgstr ""

#: Mailman/Gui/General.py:398
msgid "Should postings include the <tt>List-Post:</tt> header?"
msgstr ""

#: Mailman/Gui/General.py:399
msgid ""
"The <tt>List-Post:</tt> header is one of the headers\n"
"             recommended by\n"
"             <a href=\"http://www.faqs.org/rfcs/rfc2369.html\">RFC 2369</"
"a>.\n"
"             However for some <em>announce-only</em> mailing lists, only a\n"
"             very select group of people are allowed to post to the list; "
"the\n"
"             general membership is usually not allowed to post.  For lists "
"of\n"
"             this nature, the <tt>List-Post:</tt> header is misleading.\n"
"             Select <em>No</em> to disable the inclusion of this header. "
"(This\n"
"             does not affect the inclusion of the other <tt>List-*:</tt>\n"
"             headers.)"
msgstr ""

#: Mailman/Gui/General.py:414
msgid ""
"Discard held messages older than this number of days.\n"
"            Use 0 for no automatic discarding."
msgstr ""

#: Mailman/Gui/General.py:424
msgid ""
"<b>real_name</b> attribute not\n"
"            changed!  It must differ from the list's name by case\n"
"            only."
msgstr ""

#: Mailman/Gui/General.py:454
msgid ""
"You cannot add a Reply-To: to an explicit\n"
"            address if that address is blank.  Resetting these values."
msgstr ""

#: Mailman/Gui/Language.py:34
msgid "Language&nbsp;options"
msgstr ""

#: Mailman/Gui/Language.py:66
msgid "Natural language (internationalization) options."
msgstr ""

#: Mailman/Gui/Language.py:71
msgid "Default language for this list."
msgstr ""

#: Mailman/Gui/Language.py:72
msgid ""
"This is the default natural language for this mailing list.\n"
"             If <a href=\"?VARHELP=language/available_languages\">more than "
"one\n"
"             language</a> is supported then users will be able to select "
"their\n"
"             own preferences for when they interact with the list.  All "
"other\n"
"             interactions will be conducted in the default language.  This\n"
"             applies to both web-based and email-based messages, but not to\n"
"             email posted by list members."
msgstr ""

#: Mailman/Gui/Language.py:82
msgid "Languages supported by this list."
msgstr ""

#: Mailman/Gui/Language.py:84
msgid ""
"These are all the natural languages supported by this list.\n"
"             Note that the\n"
"             <a href=\"?VARHELP=language/preferred_language\">default\n"
"             language</a> must be included."
msgstr ""

#: Mailman/Gui/Language.py:90
msgid "Always"
msgstr ""

#: Mailman/Gui/Language.py:90
msgid "As needed"
msgstr ""

#: Mailman/Gui/Language.py:90
msgid "Never"
msgstr ""

#: Mailman/Gui/Language.py:91
msgid ""
"Encode the\n"
"             <a href=\"?VARHELP=general/subject_prefix\">subject\n"
"             prefix</a> even when it consists of only ASCII characters?"
msgstr ""

#: Mailman/Gui/Language.py:95
msgid ""
"If your mailing list's default language uses a non-ASCII\n"
"             character set and the prefix contains non-ASCII characters, "
"the\n"
"             prefix will always be encoded according to the relevant\n"
"             standards.  However, if your prefix contains only ASCII\n"
"             characters, you may want to set this option to <em>Never</em> "
"to\n"
"             disable prefix encoding.  This can make the subject headers\n"
"             slightly more readable for users with mail readers that don't\n"
"             properly handle non-ASCII encodings.\n"
"\n"
"             <p>Note however, that if your mailing list receives both "
"encoded\n"
"             and unencoded subject headers, you might want to choose <em>As\n"
"             needed</em>.  Using this setting, Mailman will not encode "
"ASCII\n"
"             prefixes when the rest of the header contains only ASCII\n"
"             characters, but if the original header contains non-ASCII\n"
"             characters, it will encode the prefix.  This avoids an "
"ambiguity\n"
"             in the standards which could cause some mail readers to "
"display\n"
"             extra, or missing spaces between the prefix and the original\n"
"             header."
msgstr ""

#: Mailman/Gui/Membership.py:26
msgid "Membership&nbsp;Management..."
msgstr ""

#: Mailman/Gui/Membership.py:30
msgid "Membership&nbsp;List"
msgstr ""

#: Mailman/Gui/Membership.py:31
msgid "Mass&nbsp;Subscription"
msgstr ""

#: Mailman/Gui/Membership.py:32
msgid "Mass&nbsp;Removal"
msgstr ""

#: Mailman/Gui/NonDigest.py:34
msgid "Non-digest&nbsp;options"
msgstr ""

#: Mailman/Gui/NonDigest.py:42
msgid "Policies concerning immediately delivered list traffic."
msgstr ""

#: Mailman/Gui/NonDigest.py:45
msgid ""
"Can subscribers choose to receive mail immediately, rather\n"
"             than in batched digests?"
msgstr ""

#: Mailman/Gui/NonDigest.py:52
msgid "Full Personalization"
msgstr ""

#: Mailman/Gui/NonDigest.py:54
msgid ""
"Should Mailman personalize each non-digest delivery?\n"
"                 This is often useful for announce-only lists, but <a\n"
"                 href=\"?VARHELP=nondigest/personalize\">read the details</"
"a>\n"
"                 section for a discussion of important performance\n"
"                 issues."
msgstr ""

#: Mailman/Gui/NonDigest.py:60
msgid ""
"Normally, Mailman sends the regular delivery messages to\n"
"                 the mail server in batches.  This is much more efficent\n"
"                 because it reduces the amount of traffic between Mailman "
"and\n"
"                 the mail server.\n"
"\n"
"                 <p>However, some lists can benefit from a more "
"personalized\n"
"                 approach.  In this case, Mailman crafts a new message for\n"
"                 each member on the regular delivery list.  Turning this\n"
"                 feature on may degrade the performance of your site, so "
"you\n"
"                 need to carefully consider whether the trade-off is worth "
"it,\n"
"                 or whether there are other ways to accomplish what you "
"want.\n"
"                 You should also carefully monitor your system load to make\n"
"                 sure it is acceptable.\n"
"\n"
"                 <p>Select <em>No</em> to disable personalization and send\n"
"                 messages to the members in batches.  Select <em>Yes</em> "
"to\n"
"                 personalize deliveries and allow additional substitution\n"
"                 variables in message headers and footers (see below).  In\n"
"                 addition, by selecting <em>Full Personalization</em>, the\n"
"                 <code>To</code> header of posted messages will be modified "
"to\n"
"                 include the member's address instead of the list's posting\n"
"                 address.\n"
"\n"
"                 <p>When personalization is enabled, a few more expansion\n"
"                 variables that can be included in the <a\n"
"                 href=\"?VARHELP=nondigest/msg_header\">message header</a> "
"and\n"
"                 <a href=\"?VARHELP=nondigest/msg_footer\">message footer</"
"a>.\n"
"\n"
"                 <p>These additional substitution variables will be "
"available\n"
"                 for your headers and footers, when this feature is "
"enabled:\n"
"\n"
"                 <ul><li><b>user_address</b> - The address of the user,\n"
"                         coerced to lower case.\n"
"                     <li><b>user_delivered_to</b> - The case-preserved "
"address\n"
"                         that the user is subscribed with.\n"
"                     <li><b>user_password</b> - The user's password.\n"
"                     <li><b>user_name</b> - The user's full name.\n"
"                     <li><b>user_optionsurl</b> - The url to the user's "
"option\n"
"                         page.\n"
"                 </ul>\n"
"                 "
msgstr ""

#: Mailman/Gui/NonDigest.py:109
msgid ""
"When <a href=\"?VARHELP=nondigest/personalize\">personalization</a> is "
"enabled\n"
"for this list, additional substitution variables are allowed in your "
"headers\n"
"and footers:\n"
"\n"
"<ul><li><b>user_address</b> - The address of the user,\n"
"        coerced to lower case.\n"
"    <li><b>user_delivered_to</b> - The case-preserved address\n"
"        that the user is subscribed with.\n"
"    <li><b>user_password</b> - The user's password.\n"
"    <li><b>user_name</b> - The user's full name.\n"
"    <li><b>user_optionsurl</b> - The url to the user's option\n"
"        page.\n"
"</ul>\n"
msgstr ""

#: Mailman/Gui/NonDigest.py:128
msgid "Header added to mail sent to regular list members"
msgstr ""

#: Mailman/Gui/NonDigest.py:129
msgid ""
"Text prepended to the top of every immediately-delivery\n"
"             message. "
msgstr ""

#: Mailman/Gui/NonDigest.py:133
msgid "Footer added to mail sent to regular list members"
msgstr ""

#: Mailman/Gui/NonDigest.py:134
msgid ""
"Text appended to the bottom of every immediately-delivery\n"
"             message. "
msgstr ""

#: Mailman/Gui/NonDigest.py:140
msgid "Scrub attachments of regular delivery message?"
msgstr ""

#: Mailman/Gui/NonDigest.py:141
msgid ""
"When you scrub attachments, they are stored in archive\n"
"             area and links are made in the message so that the member can\n"
"             access via web browser. If you want the attachments totally\n"
"             disappear, you can use content filter options."
msgstr ""

#: Mailman/Gui/Passwords.py:27
msgid "Passwords"
msgstr ""

#: Mailman/Gui/Privacy.py:37
msgid "Privacy options..."
msgstr ""

#: Mailman/Gui/Privacy.py:41
msgid "Subscription&nbsp;rules"
msgstr ""

#: Mailman/Gui/Privacy.py:42
msgid "Sender&nbsp;filters"
msgstr ""

#: Mailman/Gui/Privacy.py:43
msgid "Recipient&nbsp;filters"
msgstr ""

#: Mailman/Gui/Privacy.py:44
msgid "Spam&nbsp;filters"
msgstr ""

#: Mailman/Gui/Privacy.py:58 Mailman/Gui/Usenet.py:63
msgid "None"
msgstr ""

#: Mailman/Gui/Privacy.py:59 Mailman/Gui/Privacy.py:82
msgid "Confirm"
msgstr ""

#: Mailman/Gui/Privacy.py:60 Mailman/Gui/Privacy.py:83
msgid "Require approval"
msgstr ""

#: Mailman/Gui/Privacy.py:61 Mailman/Gui/Privacy.py:84
msgid "Confirm and approve"
msgstr ""

#: Mailman/Gui/Privacy.py:63 Mailman/Gui/Privacy.py:86
msgid "What steps are required for subscription?<br>"
msgstr ""

#: Mailman/Gui/Privacy.py:64
msgid ""
"None - no verification steps (<em>Not\n"
"                           Recommended </em>)<br>\n"
"                           Confirm (*) - email confirmation step required "
"<br>\n"
"                           Require approval - require list administrator\n"
"                           Approval for subscriptions <br>\n"
"                           Confirm and approve - both confirm and approve\n"
"                           \n"
"                           <p>(*) when someone requests a subscription,\n"
"                           Mailman sends them a notice with a unique\n"
"                           subscription request number that they must reply "
"to\n"
"                           in order to subscribe.<br>\n"
"\n"
"                           This prevents mischievous (or malicious) people\n"
"                           from creating subscriptions for others without\n"
"                           their consent."
msgstr ""

#: Mailman/Gui/Privacy.py:87
msgid ""
"Confirm (*) - email confirmation required <br>\n"
"                           Require approval - require list administrator\n"
"                           approval for subscriptions <br>\n"
"                           Confirm and approve - both confirm and approve\n"
"                           \n"
"                           <p>(*) when someone requests a subscription,\n"
"                           Mailman sends them a notice with a unique\n"
"                           subscription request number that they must reply "
"to\n"
"                           in order to subscribe.<br> This prevents\n"
"                           mischievous (or malicious) people from creating\n"
"                           subscriptions for others without their consent."
msgstr ""

#: Mailman/Gui/Privacy.py:103
msgid ""
"This section allows you to configure subscription and\n"
"            membership exposure policy.  You can also control whether this\n"
"            list is public or not.  See also the\n"
"            <a href=\"%(admin)s/archive\">Archival Options</a> section for\n"
"            separate archive-related privacy settings."
msgstr ""

#: Mailman/Gui/Privacy.py:109
msgid "Subscribing"
msgstr ""

#: Mailman/Gui/Privacy.py:111
msgid ""
"Advertise this list when people ask what lists are on this\n"
"             machine?"
msgstr ""

#: Mailman/Gui/Privacy.py:117
msgid ""
"Is the list moderator's approval required for unsubscription\n"
"             requests?  (<em>No</em> is recommended)"
msgstr ""

#: Mailman/Gui/Privacy.py:120
msgid ""
"When members want to leave a list, they will make an\n"
"             unsubscription request, either via the web or via email.\n"
"             Normally it is best for you to allow open unsubscriptions so "
"that\n"
"             users can easily remove themselves from mailing lists (they "
"get\n"
"             really upset if they can't get off lists!).\n"
"\n"
"             <p>For some lists though, you may want to impose moderator\n"
"             approval before an unsubscription request is processed.  "
"Examples\n"
"             of such lists include a corporate mailing list that all "
"employees\n"
"             are required to be members of."
msgstr ""

#: Mailman/Gui/Privacy.py:131
msgid "Ban list"
msgstr ""

#: Mailman/Gui/Privacy.py:133
msgid ""
"List of addresses which are banned from membership in this\n"
"             mailing list."
msgstr ""

#: Mailman/Gui/Privacy.py:136
msgid ""
"Addresses in this list are banned outright from subscribing\n"
"             to this mailing list, with no further moderation required.  "
"Add\n"
"             addresses one per line; start the line with a ^ character to\n"
"             designate a regular expression match."
msgstr ""

#: Mailman/Gui/Privacy.py:141
msgid "Membership exposure"
msgstr ""

#: Mailman/Gui/Privacy.py:143
msgid "Anyone"
msgstr ""

#: Mailman/Gui/Privacy.py:143
msgid "List admin only"
msgstr ""

#: Mailman/Gui/Privacy.py:143
msgid "List members"
msgstr ""

#: Mailman/Gui/Privacy.py:144
msgid "Who can view subscription list?"
msgstr ""

#: Mailman/Gui/Privacy.py:146
msgid ""
"When set, the list of subscribers is protected by member or\n"
"             admin password authentication."
msgstr ""

#: Mailman/Gui/Privacy.py:150
msgid ""
"Show member addresses so they're not directly recognizable\n"
"             as email addresses?"
msgstr ""

#: Mailman/Gui/Privacy.py:152
msgid ""
"Setting this option causes member email addresses to be\n"
"             transformed when they are presented on list web pages (both in\n"
"             text and as links), so they're not trivially recognizable as\n"
"             email addresses.  The intention is to prevent the addresses\n"
"             from being snarfed up by automated web scanners for use by\n"
"             spammers."
msgstr ""

#: Mailman/Gui/Privacy.py:162
msgid ""
"When a message is posted to the list, a series of\n"
"            moderation steps are take to decide whether the a moderator "
"must\n"
"            first approve the message or not.  This section contains the\n"
"            controls for moderation of both member and non-member postings.\n"
"\n"
"            <p>Member postings are held for moderation if their\n"
"            <b>moderation flag</b> is turned on.  You can control whether\n"
"            member postings are moderated by default or not.\n"
"\n"
"            <p>Non-member postings can be automatically\n"
"            <a href=\"?VARHELP=privacy/sender/accept_these_nonmembers\"\n"
"            >accepted</a>,\n"
"            <a href=\"?VARHELP=privacy/sender/hold_these_nonmembers\">held "
"for\n"
"            moderation</a>,\n"
"            <a href=\"?VARHELP=privacy/sender/reject_these_nonmembers\"\n"
"            >rejected</a> (bounced), or\n"
"            <a href=\"?VARHELP=privacy/sender/discard_these_nonmembers\"\n"
"            >discarded</a>,\n"
"            either individually or as a group.  Any\n"
"            posting from a non-member who is not explicitly accepted,\n"
"            rejected, or discarded, will have their posting filtered by the\n"
"            <a href=\"?VARHELP=privacy/sender/generic_nonmember_action"
"\">general\n"
"            non-member rules</a>.\n"
"\n"
"            <p>In the text boxes below, add one address per line; start the\n"
"            line with a ^ character to designate a <a href=\n"
"            \"http://www.python.org/doc/current/lib/module-re.html\"\n"
"            >Python regular expression</a>.  When entering backslashes, do "
"so\n"
"            as if you were using Python raw strings (i.e. you generally "
"just\n"
"            use a single backslash).\n"
"\n"
"            <p>Note that non-regexp matches are always done first."
msgstr ""

#: Mailman/Gui/Privacy.py:195
msgid "Member filters"
msgstr ""

#: Mailman/Gui/Privacy.py:198
msgid "By default, should new list member postings be moderated?"
msgstr ""

#: Mailman/Gui/Privacy.py:200
msgid ""
"Each list member has a <em>moderation flag</em> which says\n"
"             whether messages from the list member can be posted directly "
"to\n"
"             the list, or must first be approved by the list moderator.  "
"When\n"
"             the moderation flag is turned on, list member postings must be\n"
"             approved first.  You, the list administrator can decide whether "
"a\n"
"             specific individual's postings will be moderated or not.\n"
"\n"
"             <p>When a new member is subscribed, their initial moderation "
"flag\n"
"             takes its value from this option.  Turn this option off to "
"accept\n"
"             member postings by default.  Turn this option on to, by "
"default,\n"
"             moderate member postings first.  You can always manually set "
"an\n"
"             individual member's moderation bit by using the\n"
"             <a href=\"%(adminurl)s/members\">membership management\n"
"             screens</a>."
msgstr ""

#: Mailman/Gui/Privacy.py:217
msgid ""
"Action to take when a moderated member posts to the\n"
"             list."
msgstr ""

#: Mailman/Gui/Privacy.py:219
msgid ""
"<ul><li><b>Hold</b> -- this holds the message for approval\n"
"             by the list moderators.\n"
"\n"
"             <p><li><b>Reject</b> -- this automatically rejects the message "
"by\n"
"             sending a bounce notice to the post's author.  The text of the\n"
"             bounce notice can be <a\n"
"             href=\"?VARHELP=privacy/sender/member_moderation_notice\"\n"
"             >configured by you</a>.\n"
"\n"
"             <p><li><b>Discard</b> -- this simply discards the message, "
"with\n"
"             no notice sent to the post's author.\n"
"             </ul>"
msgstr ""

#: Mailman/Gui/Privacy.py:233
msgid ""
"Text to include in any\n"
"             <a href=\"?VARHELP/privacy/sender/member_moderation_action\"\n"
"             >rejection notice</a> to\n"
"             be sent to moderated members who post to this list."
msgstr ""

#: Mailman/Gui/Privacy.py:238
msgid "Non-member filters"
msgstr ""

#: Mailman/Gui/Privacy.py:241
msgid ""
"List of non-member addresses whose postings should be\n"
"             automatically accepted."
msgstr ""

#: Mailman/Gui/Privacy.py:244
msgid ""
"Postings from any of these non-members will be automatically\n"
"             accepted with no further moderation applied.  Add member\n"
"             addresses one per line; start the line with a ^ character to\n"
"             designate a regular expression match."
msgstr ""

#: Mailman/Gui/Privacy.py:250
msgid ""
"List of non-member addresses whose postings will be\n"
"             immediately held for moderation."
msgstr ""

#: Mailman/Gui/Privacy.py:253
msgid ""
"Postings from any of these non-members will be immediately\n"
"             and automatically held for moderation by the list moderators.\n"
"             The sender will receive a notification message which will "
"allow\n"
"             them to cancel their held message.  Add member addresses one "
"per\n"
"             line; start the line with a ^ character to designate a regular\n"
"             expression match."
msgstr ""

#: Mailman/Gui/Privacy.py:261
msgid ""
"List of non-member addresses whose postings will be\n"
"             automatically rejected."
msgstr ""

#: Mailman/Gui/Privacy.py:264
msgid ""
"Postings from any of these non-members will be automatically\n"
"             rejected.  In other words, their messages will be bounced back "
"to\n"
"             the sender with a notification of automatic rejection.  This\n"
"             option is not appropriate for known spam senders; their "
"messages\n"
"             should be\n"
"             <a href=\"?VARHELP=privacy/sender/discard_these_nonmembers\"\n"
"             >automatically discarded</a>.\n"
"\n"
"             <p>Add member addresses one per line; start the line with a ^\n"
"             character to designate a regular expression match."
msgstr ""

#: Mailman/Gui/Privacy.py:276
msgid ""
"List of non-member addresses whose postings will be\n"
"             automatically discarded."
msgstr ""

#: Mailman/Gui/Privacy.py:279
msgid ""
"Postings from any of these non-members will be automatically\n"
"             discarded.  That is, the message will be thrown away with no\n"
"             further processing or notification.  The sender will not "
"receive\n"
"             a notification or a bounce, however the list moderators can\n"
"             optionally <a href=\"?VARHELP=privacy/sender/"
"forward_auto_discards\"\n"
"             >receive copies of auto-discarded messages.</a>.\n"
"\n"
"             <p>Add member addresses one per line; start the line with a ^\n"
"             character to designate a regular expression match."
msgstr ""

#: Mailman/Gui/Privacy.py:291
msgid ""
"Action to take for postings from non-members for which no\n"
"             explicit action is defined."
msgstr ""

#: Mailman/Gui/Privacy.py:294
msgid ""
"When a post from a non-member is received, the message's\n"
"             sender is matched against the list of explicitly\n"
"             <a href=\"?VARHELP=privacy/sender/accept_these_nonmembers\"\n"
"             >accepted</a>,\n"
"             <a href=\"?VARHELP=privacy/sender/hold_these_nonmembers\">held</"
"a>,\n"
"             <a href=\"?VARHELP=privacy/sender/reject_these_nonmembers\"\n"
"             >rejected</a> (bounced), and\n"
"             <a href=\"?VARHELP=privacy/sender/discard_these_nonmembers\"\n"
"             >discarded</a> addresses.  If no match is found, then this "
"action\n"
"             is taken."
msgstr ""

#: Mailman/Gui/Privacy.py:306
msgid ""
"Should messages from non-members, which are automatically\n"
"             discarded, be forwarded to the list moderator?"
msgstr ""

#: Mailman/Gui/Privacy.py:310
msgid ""
"Text to include in any rejection notice to be sent to\n"
"             non-members who post to this list. This notice can include\n"
"             the list's owner address by %%(listowner)s and replaces the\n"
"             internally crafted default message."
msgstr ""

#: Mailman/Gui/Privacy.py:318
msgid ""
"This section allows you to configure various filters based on\n"
"            the recipient of the message."
msgstr ""

#: Mailman/Gui/Privacy.py:321
msgid "Recipient filters"
msgstr ""

#: Mailman/Gui/Privacy.py:325
msgid ""
"Must posts have list named in destination (to, cc) field\n"
"             (or be among the acceptable alias names, specified below)?"
msgstr ""

#: Mailman/Gui/Privacy.py:328
msgid ""
"Many (in fact, most) spams do not explicitly name their\n"
"             myriad destinations in the explicit destination addresses - in\n"
"             fact often the To: field has a totally bogus address for\n"
"             obfuscation.  The constraint applies only to the stuff in the\n"
"             address before the '@' sign, but still catches all such spams.\n"
"\n"
"             <p>The cost is that the list will not accept unhindered any\n"
"             postings relayed from other addresses, unless\n"
"\n"
"             <ol>\n"
"                 <li>The relaying address has the same name, or\n"
"\n"
"                 <li>The relaying address name is included on the options "
"that\n"
"                 specifies acceptable aliases for the list.\n"
"\n"
"             </ol>"
msgstr ""

#: Mailman/Gui/Privacy.py:346
msgid ""
"Alias names (regexps) which qualify as explicit to or cc\n"
"             destination names for this list."
msgstr ""

#: Mailman/Gui/Privacy.py:349
msgid ""
"Alternate addresses that are acceptable when\n"
"             `require_explicit_destination' is enabled.  This option takes "
"a\n"
"             list of regular expressions, one per line, which is matched\n"
"             against every recipient address in the message.  The matching "
"is\n"
"             performed with Python's re.match() function, meaning they are\n"
"             anchored to the start of the string.\n"
"             \n"
"             <p>For backwards compatibility with Mailman 1.1, if the regexp\n"
"             does not contain an `@', then the pattern is matched against "
"just\n"
"             the local part of the recipient address.  If that match fails, "
"or\n"
"             if the pattern does contain an `@', then the pattern is "
"matched\n"
"             against the entire recipient address.\n"
"             \n"
"             <p>Matching against the local part is deprecated; in a future\n"
"             release, the pattern will always be matched against the entire\n"
"             recipient address."
msgstr ""

#: Mailman/Gui/Privacy.py:367
msgid "Ceiling on acceptable number of recipients for a posting."
msgstr ""

#: Mailman/Gui/Privacy.py:369
msgid ""
"If a posting has this number, or more, of recipients, it is\n"
"             held for admin approval.  Use 0 for no ceiling."
msgstr ""

#: Mailman/Gui/Privacy.py:374
msgid ""
"This section allows you to configure various anti-spam\n"
"            filters posting filters, which can help reduce the amount of "
"spam\n"
"            your list members end up receiving.\n"
"            "
msgstr ""

#: Mailman/Gui/Privacy.py:379
msgid "Header filters"
msgstr ""

#: Mailman/Gui/Privacy.py:382
msgid "Filter rules to match against the headers of a message."
msgstr ""

#: Mailman/Gui/Privacy.py:384
msgid ""
"Each header filter rule has two parts, a list of regular\n"
"             expressions, one per line, and an action to take.  Mailman\n"
"             matches the message's headers against every regular expression "
"in\n"
"             the rule and if any match, the message is rejected, held, or\n"
"             discarded based on the action you specify.  Use <em>Defer</em> "
"to\n"
"             temporarily disable a rule.\n"
"\n"
"             You can have more than one filter rule for your list.  In that\n"
"             case, each rule is matched in turn, with processing stopped "
"after\n"
"             the first match.\n"
"\n"
"             Note that headers are collected from all the attachments \n"
"             (except for the mailman administrivia message) and\n"
"             matched against the regular expressions. With this feature,\n"
"             you can effectively sort out messages with dangerous file\n"
"             types or file name extensions."
msgstr ""

#: Mailman/Gui/Privacy.py:401
msgid "Legacy anti-spam filters"
msgstr ""

#: Mailman/Gui/Privacy.py:404
msgid "Hold posts with header value matching a specified regexp."
msgstr ""

#: Mailman/Gui/Privacy.py:405
msgid ""
"Use this option to prohibit posts according to specific\n"
"             header values.  The target value is a regular-expression for\n"
"             matching against the specified header.  The match is done\n"
"             disregarding letter case.  Lines beginning with '#' are "
"ignored\n"
"             as comments.\n"
"\n"
"             <p>For example:<pre>to: .*@public.com </pre> says to hold all\n"
"             postings with a <em>To:</em> mail header containing '@public."
"com'\n"
"             anywhere among the addresses.\n"
"\n"
"             <p>Note that leading whitespace is trimmed from the regexp.  "
"This\n"
"             can be circumvented in a number of ways, e.g. by escaping or\n"
"             bracketing it."
msgstr ""

#: Mailman/Gui/Privacy.py:485
msgid ""
"Header filter rules require a pattern.\n"
"                Incomplete filter rules will be ignored."
msgstr ""

#: Mailman/Gui/Privacy.py:493
msgid ""
"The header filter rule pattern\n"
"                '%(safepattern)s' is not a legal regular expression.  This\n"
"                rule will be ignored."
msgstr ""

#: Mailman/Gui/Topics.py:36
msgid "Topics"
msgstr ""

#: Mailman/Gui/Topics.py:44
msgid "List topic keywords"
msgstr ""

#: Mailman/Gui/Topics.py:46
msgid "Disabled"
msgstr ""

#: Mailman/Gui/Topics.py:46
msgid "Enabled"
msgstr ""

#: Mailman/Gui/Topics.py:47
msgid "Should the topic filter be enabled or disabled?"
msgstr ""

#: Mailman/Gui/Topics.py:49
msgid ""
"The topic filter categorizes each incoming email message\n"
"             according to <a\n"
"            href=\"http://www.python.org/doc/current/lib/module-re.html"
"\">regular\n"
"             expression filters</a> you specify below.  If the message's\n"
"             <code>Subject:</code> or <code>Keywords:</code> header contains "
"a\n"
"             match against a topic filter, the message is logically placed\n"
"             into a topic <em>bucket</em>.  Each user can then choose to "
"only\n"
"             receive messages from the mailing list for a particular topic\n"
"             bucket (or buckets).  Any message not categorized in a topic\n"
"             bucket registered with the user is not delivered to the list.\n"
"\n"
"             <p>Note that this feature only works with regular delivery, "
"not\n"
"             digest delivery.\n"
"\n"
"             <p>The body of the message can also be optionally scanned for\n"
"             <code>Subject:</code> and <code>Keywords:</code> headers, as\n"
"             specified by the <a\n"
"       href=\"?VARHELP=topics/topics_bodylines_limit"
"\">topics_bodylines_limit</a>\n"
"             configuration variable."
msgstr ""

#: Mailman/Gui/Topics.py:70
msgid "How many body lines should the topic matcher scan?"
msgstr ""

#: Mailman/Gui/Topics.py:72
msgid ""
"The topic matcher will scan this many lines of the message\n"
"             body looking for topic keyword matches.  Body scanning stops "
"when\n"
"             either this many lines have been looked at, or a non-header-"
"like\n"
"             body line is encountered.  By setting this value to zero, no "
"body\n"
"             lines will be scanned (i.e. only the <code>Keywords:</code> "
"and\n"
"             <code>Subject:</code> headers will be scanned).  By setting "
"this\n"
"             value to a negative number, then all body lines will be "
"scanned\n"
"             until a non-header-like line is encountered.\n"
"             "
msgstr ""

#: Mailman/Gui/Topics.py:83
msgid "Topic keywords, one per line, to match against each message."
msgstr ""

#: Mailman/Gui/Topics.py:85
msgid ""
"Each topic keyword is actually a regular expression, which is\n"
"             matched against certain parts of a mail message, specifically "
"the\n"
"             <code>Keywords:</code> and <code>Subject:</code> message "
"headers.\n"
"             Note that the first few lines of the body of the message can "
"also\n"
"             contain a <code>Keywords:</code> and <code>Subject:</code>\n"
"             \"header\" on which matching is also performed."
msgstr ""

#: Mailman/Gui/Topics.py:123
msgid ""
"Topic specifications require both a name and\n"
"                a pattern.  Incomplete topics will be ignored."
msgstr ""

#: Mailman/Gui/Topics.py:132
msgid ""
"The topic pattern '%(safepattern)s' is not a\n"
"                legal regular expression.  It will be discarded."
msgstr ""

#: Mailman/Gui/Usenet.py:25
msgid "Mail&lt;-&gt;News&nbsp;gateways"
msgstr ""

#: Mailman/Gui/Usenet.py:35
msgid "Mail-to-News and News-to-Mail gateway services."
msgstr ""

#: Mailman/Gui/Usenet.py:37
msgid "News server settings"
msgstr ""

#: Mailman/Gui/Usenet.py:40
msgid "The hostname of the machine your news server is running on."
msgstr ""

#: Mailman/Gui/Usenet.py:41
msgid ""
"This value may be either the name of your news server, or\n"
"             optionally of the format name:port, where port is a port "
"number.\n"
"\n"
"             The news server is not part of Mailman proper.  You have to\n"
"             already have access to an NNTP server, and that NNTP server "
"must\n"
"             recognize the machine this mailing list runs on as a machine\n"
"             capable of reading and posting news."
msgstr ""

#: Mailman/Gui/Usenet.py:50
msgid "The name of the Usenet group to gateway to and/or from."
msgstr ""

#: Mailman/Gui/Usenet.py:53
msgid ""
"Should new posts to the mailing list be sent to the\n"
"             newsgroup?"
msgstr ""

#: Mailman/Gui/Usenet.py:57
msgid ""
"Should new posts to the newsgroup be sent to the mailing\n"
"             list?"
msgstr ""

#: Mailman/Gui/Usenet.py:60
msgid "Forwarding options"
msgstr ""

#: Mailman/Gui/Usenet.py:63
msgid "Moderated"
msgstr ""

#: Mailman/Gui/Usenet.py:63
msgid "Open list, moderated group"
msgstr ""

#: Mailman/Gui/Usenet.py:66
msgid "The moderation policy of the newsgroup."
msgstr ""

#: Mailman/Gui/Usenet.py:68
msgid ""
"This setting determines the moderation policy of the\n"
"             newsgroup and its interaction with the moderation policy of "
"the\n"
"             mailing list.  This only applies to the newsgroup that you are\n"
"             gatewaying <em>to</em>, so if you are only gatewaying from\n"
"             Usenet, or the newsgroup you are gatewaying to is not "
"moderated,\n"
"             set this option to <em>None</em>.\n"
"\n"
"             <p>If the newsgroup is moderated, you can set this mailing "
"list\n"
"             up to be the moderation address for the newsgroup.  By "
"selecting\n"
"             <em>Moderated</em>, an additional posting hold will be placed "
"in\n"
"             the approval process.  All messages posted to the mailing list\n"
"             will have to be approved before being sent on to the "
"newsgroup,\n"
"             or to the mailing list membership.\n"
"\n"
"             <p><em>Note that if the message has an <tt>Approved</tt> "
"header\n"
"             with the list's administrative password in it, this hold test\n"
"             will be bypassed, allowing privileged posters to send messages\n"
"             directly to the list and the newsgroup.</em>\n"
"\n"
"             <p>Finally, if the newsgroup is moderated, but you want to "
"have\n"
"             an open posting policy anyway, you should select <em>Open "
"list,\n"
"             moderated group</em>.  The effect of this is to use the normal\n"
"             Mailman moderation facilities, but to add an <tt>Approved</tt>\n"
"             header to all messages that are gatewayed to Usenet."
msgstr ""

#: Mailman/Gui/Usenet.py:94
msgid "Prefix <tt>Subject:</tt> headers on postings gated to news?"
msgstr ""

#: Mailman/Gui/Usenet.py:95
msgid ""
"Mailman prefixes <tt>Subject:</tt> headers with\n"
"             <a href=\"?VARHELP=general/subject_prefix\">text you can\n"
"             customize</a> and normally, this prefix shows up in messages\n"
"             gatewayed to Usenet.  You can set this option to <em>No</em> "
"to\n"
"             disable the prefix on gated messages.  Of course, if you turn "
"off\n"
"             normal <tt>Subject:</tt> prefixes, they won't be prefixed for\n"
"             gated messages either."
msgstr ""

#: Mailman/Gui/Usenet.py:103
msgid "Mass catch up"
msgstr ""

#: Mailman/Gui/Usenet.py:106
msgid "Should Mailman perform a <em>catchup</em> on the newsgroup?"
msgstr ""

#: Mailman/Gui/Usenet.py:107
msgid ""
"When you tell Mailman to perform a catchup on the newsgroup,\n"
"             this means that you want to start gating messages to the "
"mailing\n"
"             list with the next new message found.  All earlier messages on\n"
"             the newsgroup will be ignored.  This is as if you were reading\n"
"             the newsgroup yourself, and you marked all current messages as\n"
"             <em>read</em>.  By catching up, your mailing list members will\n"
"             not see any of the earlier messages."
msgstr ""

#: Mailman/Gui/Usenet.py:121
msgid "Mass catchup completed"
msgstr ""

#: Mailman/Gui/Usenet.py:133
msgid ""
"You cannot enable gatewaying unless both the\n"
"                <a href=\"?VARHELP=gateway/nntp_host\">news server field</a> "
"and\n"
"                the <a href=\"?VARHELP=gateway/linked_newsgroup\">linked\n"
"                newsgroup</a> fields are filled in."
msgstr ""

#: Mailman/HTMLFormatter.py:47
msgid "%(listinfo_link)s list run by %(owner_link)s"
msgstr ""

#: Mailman/HTMLFormatter.py:55
msgid "%(realname)s administrative interface"
msgstr ""

#: Mailman/HTMLFormatter.py:56
msgid " (requires authorization)"
msgstr ""

#: Mailman/HTMLFormatter.py:59
msgid "Overview of all %(hostname)s mailing lists"
msgstr ""

#: Mailman/HTMLFormatter.py:80
msgid "<em>(1 private member not shown)</em>"
msgstr ""

#: Mailman/HTMLFormatter.py:82
msgid "<em>(%(num_concealed)d private members not shown)</em>"
msgstr ""

#: Mailman/HTMLFormatter.py:138
msgid "; it was disabled by you"
msgstr ""

#: Mailman/HTMLFormatter.py:140
msgid "; it was disabled by the list administrator"
msgstr ""

#: Mailman/HTMLFormatter.py:144
msgid ""
"; it was disabled due to excessive bounces.  The\n"
"            last bounce was received on %(date)s"
msgstr ""

#: Mailman/HTMLFormatter.py:147
msgid "; it was disabled for unknown reasons"
msgstr ""

#: Mailman/HTMLFormatter.py:149
msgid "Note: your list delivery is currently disabled%(reason)s."
msgstr ""

#: Mailman/HTMLFormatter.py:152
msgid "Mail delivery"
msgstr ""

#: Mailman/HTMLFormatter.py:154 Mailman/HTMLFormatter.py:299
msgid "the list administrator"
msgstr ""

#: Mailman/HTMLFormatter.py:155
msgid ""
"<p>%(note)s\n"
"\n"
"            <p>You may have disabled list delivery intentionally,\n"
"            or it may have been triggered by bounces from your email\n"
"            address.  In either case, to re-enable delivery, change the\n"
"            %(link)s option below.  Contact %(mailto)s if you have any\n"
"            questions or need assistance."
msgstr ""

#: Mailman/HTMLFormatter.py:167
msgid ""
"<p>We have received some recent bounces from your\n"
"            address.  Your current <em>bounce score</em> is %(score)s out of "
"a\n"
"            maximum of %(total)s.  Please double check that your subscribed\n"
"            address is correct and that there are no problems with delivery "
"to\n"
"            this address.  Your bounce score will be automatically reset if\n"
"            the problems are corrected soon."
msgstr ""

#: Mailman/HTMLFormatter.py:179
msgid ""
"(Note - you are subscribing to a list of mailing lists, so the %(type)s "
"notice will be sent to the admin address for your membership, %(addr)s.)<p>"
msgstr ""

#: Mailman/HTMLFormatter.py:189
msgid ""
"You will be sent email requesting confirmation, to\n"
"            prevent others from gratuitously subscribing you."
msgstr ""

#: Mailman/HTMLFormatter.py:192
msgid ""
"This is a closed list, which means your subscription\n"
"            will be held for approval.  You will be notified of the list\n"
"            moderator's decision by email."
msgstr ""

#: Mailman/HTMLFormatter.py:195 Mailman/HTMLFormatter.py:202
msgid "also "
msgstr ""

#: Mailman/HTMLFormatter.py:197
msgid ""
"You will be sent email requesting confirmation, to\n"
"            prevent others from gratuitously subscribing you.  Once\n"
"            confirmation is received, your request will be held for "
"approval\n"
"            by the list moderator.  You will be notified of the moderator's\n"
"            decision by email."
msgstr ""

#: Mailman/HTMLFormatter.py:206
msgid ""
"This is %(also)sa private list, which means that the\n"
"            list of members is not available to non-members."
msgstr ""

#: Mailman/HTMLFormatter.py:209
msgid ""
"This is %(also)sa hidden list, which means that the\n"
"            list of members is available only to the list administrator."
msgstr ""

#: Mailman/HTMLFormatter.py:212
msgid ""
"This is %(also)sa public list, which means that the\n"
"            list of members list is available to everyone."
msgstr ""

#: Mailman/HTMLFormatter.py:215
msgid ""
" (but we obscure the addresses so they are not\n"
"                easily recognizable by spammers)."
msgstr ""

#: Mailman/HTMLFormatter.py:220
msgid ""
"<p>(Note that this is an umbrella list, intended to\n"
"            have only other mailing lists as members.  Among other things,\n"
"            this means that your confirmation request will be sent to the\n"
"            `%(sfx)s' account for your address.)"
msgstr ""

#: Mailman/HTMLFormatter.py:249
msgid "<b><i>either</i></b> "
msgstr ""

#: Mailman/HTMLFormatter.py:254
msgid ""
"To unsubscribe from %(realname)s, get a password reminder,\n"
"        or change your subscription options %(either)senter your "
"subscription\n"
"        email address:\n"
"        <p><center> "
msgstr ""

#: Mailman/HTMLFormatter.py:261
msgid "Unsubscribe or edit options"
msgstr ""

#: Mailman/HTMLFormatter.py:265
msgid ""
"<p>... <b><i>or</i></b> select your entry from\n"
"                      the subscribers list (see above)."
msgstr ""

#: Mailman/HTMLFormatter.py:267
msgid ""
" If you leave the field blank, you will be prompted for\n"
"        your email address"
msgstr ""

#: Mailman/HTMLFormatter.py:275
msgid ""
"(<i>%(which)s is only available to the list\n"
"                members.</i>)"
msgstr ""

#: Mailman/HTMLFormatter.py:279
msgid ""
"(<i>%(which)s is only available to the list\n"
"            administrator.</i>)"
msgstr ""

#: Mailman/HTMLFormatter.py:289
msgid "Click here for the list of "
msgstr ""

#: Mailman/HTMLFormatter.py:291
msgid " subscribers: "
msgstr ""

#: Mailman/HTMLFormatter.py:293
msgid "Visit Subscriber list"
msgstr ""

#: Mailman/HTMLFormatter.py:296
msgid "members"
msgstr ""

#: Mailman/HTMLFormatter.py:297
msgid "Address:"
msgstr ""

#: Mailman/HTMLFormatter.py:300
msgid "Admin address:"
msgstr ""

#: Mailman/HTMLFormatter.py:303
msgid "The subscribers list"
msgstr ""

#: Mailman/HTMLFormatter.py:305
msgid " <p>Enter your "
msgstr ""

#: Mailman/HTMLFormatter.py:307
msgid " and password to visit  the subscribers list: <p><center> "
msgstr ""

#: Mailman/HTMLFormatter.py:312
msgid "Password: "
msgstr ""

#: Mailman/HTMLFormatter.py:316
msgid "Visit Subscriber List"
msgstr ""

#: Mailman/HTMLFormatter.py:346
msgid "Once a month, your password will be emailed to you as a reminder."
msgstr ""

#: Mailman/HTMLFormatter.py:392
msgid "The current archive"
msgstr ""

#: Mailman/Handlers/Acknowledge.py:59
msgid "%(realname)s post acknowledgement"
msgstr ""

#: Mailman/Handlers/CalcRecips.py:68
msgid ""
"Your urgent message to the %(realname)s mailing list was not authorized for\n"
"delivery.  The original message as received by Mailman is attached.\n"
msgstr ""

#: Mailman/Handlers/Emergency.py:29
msgid "Emergency hold on all list traffic is in effect"
msgstr ""

#: Mailman/Handlers/Emergency.py:30 Mailman/Handlers/Hold.py:57
msgid "Your message was deemed inappropriate by the moderator."
msgstr ""

#: Mailman/Handlers/Hold.py:52
msgid "Sender is explicitly forbidden"
msgstr ""

#: Mailman/Handlers/Hold.py:53
msgid "You are forbidden from posting messages to this list."
msgstr ""

#: Mailman/Handlers/Hold.py:56
msgid "Post to moderated list"
msgstr ""

#: Mailman/Handlers/Hold.py:60
msgid "Post by non-member to a members-only list"
msgstr ""

#: Mailman/Handlers/Hold.py:61
msgid "Non-members are not allowed to post messages to this list."
msgstr ""

#: Mailman/Handlers/Hold.py:64
msgid "Posting to a restricted list by sender requires approval"
msgstr ""

#: Mailman/Handlers/Hold.py:65
msgid "This list is restricted; your message was not approved."
msgstr ""

#: Mailman/Handlers/Hold.py:68
msgid "Too many recipients to the message"
msgstr ""

#: Mailman/Handlers/Hold.py:69
msgid "Please trim the recipient list; it is too long."
msgstr ""

#: Mailman/Handlers/Hold.py:72
msgid "Message has implicit destination"
msgstr ""

#: Mailman/Handlers/Hold.py:73
msgid ""
"Blind carbon copies or other implicit destinations are\n"
"not allowed.  Try reposting your message by explicitly including the list\n"
"address in the To: or Cc: fields."
msgstr ""

#: Mailman/Handlers/Hold.py:78
msgid "Message may contain administrivia"
msgstr ""

#: Mailman/Handlers/Hold.py:83
msgid ""
"Please do *not* post administrative requests to the mailing\n"
"list.  If you wish to subscribe, visit %(listurl)s or send a message with "
"the\n"
"word `help' in it to the request address, %(request)s, for further\n"
"instructions."
msgstr ""

#: Mailman/Handlers/Hold.py:89
msgid "Message has a suspicious header"
msgstr ""

#: Mailman/Handlers/Hold.py:90
msgid "Your message had a suspicious header."
msgstr ""

#: Mailman/Handlers/Hold.py:100
msgid ""
"Message body is too big: %(size)d bytes with a limit of\n"
"%(limit)d KB"
msgstr ""

#: Mailman/Handlers/Hold.py:105
msgid ""
"Your message was too big; please trim it to less than\n"
"%(kb)d KB in size."
msgstr ""

#: Mailman/Handlers/Hold.py:109
msgid "Posting to a moderated newsgroup"
msgstr ""

#: Mailman/Handlers/Hold.py:244
msgid "Your message to %(listname)s awaits moderator approval"
msgstr ""

#: Mailman/Handlers/Hold.py:263
msgid "%(listname)s post from %(sender)s requires approval"
msgstr ""

#: Mailman/Handlers/Hold.py:270
msgid ""
"If you reply to this message, keeping the Subject: header intact, Mailman "
"will\n"
"discard the held message.  Do this if the message is spam.  If you reply to\n"
"this message and include an Approved: header with the list password in it, "
"the\n"
"message will be approved for posting to the list.  The Approved: header can\n"
"also appear in the first line of the body of the reply."
msgstr ""

#: Mailman/Handlers/MimeDel.py:59
msgid "The message's content type was explicitly disallowed"
msgstr ""

#: Mailman/Handlers/MimeDel.py:64
msgid "The message's content type was not explicitly allowed"
msgstr ""

#: Mailman/Handlers/MimeDel.py:72
msgid "The message's file extension was explicitly disallowed"
msgstr ""

#: Mailman/Handlers/MimeDel.py:75
msgid "The message's file extension was not explicitly allowed"
msgstr ""

#: Mailman/Handlers/MimeDel.py:87
msgid "After content filtering, the message was empty"
msgstr ""

#: Mailman/Handlers/MimeDel.py:232
msgid ""
"The attached message matched the %(listname)s mailing list's content "
"filtering\n"
"rules and was prevented from being forwarded on to the list membership.  "
"You\n"
"are receiving the only remaining copy of the discarded message.\n"
"\n"
msgstr ""

#: Mailman/Handlers/MimeDel.py:238
msgid "Content filtered message notification"
msgstr ""

#: Mailman/Handlers/Moderate.py:142
msgid ""
"You are not allowed to post to this mailing list, and your message has been\n"
"automatically rejected.  If you think that your messages are being rejected "
"in\n"
"error, contact the mailing list owner at %(listowner)s."
msgstr ""

#: Mailman/Handlers/Moderate.py:158
msgid "Auto-discard notification"
msgstr ""

#: Mailman/Handlers/Moderate.py:161
msgid "The attached message has been automatically discarded."
msgstr ""

#: Mailman/Handlers/Replybot.py:74
msgid "Auto-response for your message to the \"%(realname)s\" mailing list"
msgstr ""

#: Mailman/Handlers/Replybot.py:107
msgid "The Mailman Replybot"
msgstr ""

#: Mailman/Handlers/Scrubber.py:209
msgid ""
"An embedded and charset-unspecified text was scrubbed...\n"
"Name: %(filename)s\n"
"Url: %(url)s\n"
msgstr ""

#: Mailman/Handlers/Scrubber.py:219
msgid "HTML attachment scrubbed and removed"
msgstr ""

#: Mailman/Handlers/Scrubber.py:235 Mailman/Handlers/Scrubber.py:260
msgid ""
"An HTML attachment was scrubbed...\n"
"URL: %(url)s\n"
msgstr ""

#: Mailman/Handlers/Scrubber.py:272
msgid "no subject"
msgstr ""

#: Mailman/Handlers/Scrubber.py:273
msgid "no date"
msgstr ""

#: Mailman/Handlers/Scrubber.py:274
msgid "unknown sender"
msgstr ""

#: Mailman/Handlers/Scrubber.py:276
msgid ""
"An embedded message was scrubbed...\n"
"From: %(who)s\n"
"Subject: %(subject)s\n"
"Date: %(date)s\n"
"Size: %(size)s\n"
"Url: %(url)s\n"
msgstr ""

#: Mailman/Handlers/Scrubber.py:307
msgid ""
"A non-text attachment was scrubbed...\n"
"Name: %(filename)s\n"
"Type: %(ctype)s\n"
"Size: %(size)d bytes\n"
"Desc: %(desc)s\n"
"Url : %(url)s\n"
msgstr ""

#: Mailman/Handlers/Scrubber.py:342
msgid "Skipped content of type %(partctype)s\n"
msgstr ""

#: Mailman/Handlers/Scrubber.py:382
msgid "-------------- next part --------------\n"
msgstr ""

#: Mailman/Handlers/SpamDetect.py:55
msgid "The message headers matched a filter rule"
msgstr ""

#: Mailman/Handlers/SpamDetect.py:132
msgid "Message rejected by filter rule match"
msgstr ""

#: Mailman/Handlers/ToDigest.py:158
msgid "%(realname)s Digest, Vol %(volume)d, Issue %(issue)d"
msgstr ""

#: Mailman/Handlers/ToDigest.py:204
msgid "digest header"
msgstr ""

#: Mailman/Handlers/ToDigest.py:207
msgid "Digest Header"
msgstr ""

#: Mailman/Handlers/ToDigest.py:220
msgid "Today's Topics:\n"
msgstr ""

#: Mailman/Handlers/ToDigest.py:300
msgid "Today's Topics (%(msgcount)d messages)"
msgstr ""

#: Mailman/Handlers/ToDigest.py:326
msgid "[Message discarded by content filter]"
msgstr ""

#: Mailman/Handlers/ToDigest.py:354
msgid "digest footer"
msgstr ""

#: Mailman/Handlers/ToDigest.py:357
msgid "Digest Footer"
msgstr ""

#: Mailman/Handlers/ToDigest.py:371
msgid "End of "
msgstr ""

#: Mailman/ListAdmin.py:295
msgid "Posting of your message titled \"%(subject)s\""
msgstr ""

#: Mailman/ListAdmin.py:334
msgid "Forward of moderated message"
msgstr ""

#: Mailman/ListAdmin.py:390
msgid "New subscription request to list %(realname)s from %(addr)s"
msgstr ""

#: Mailman/ListAdmin.py:413
msgid "Subscription request"
msgstr ""

#: Mailman/ListAdmin.py:442
msgid "New unsubscription request from %(realname)s by %(addr)s"
msgstr ""

#: Mailman/ListAdmin.py:465
msgid "Unsubscription request"
msgstr ""

#: Mailman/ListAdmin.py:496
msgid "Original Message"
msgstr ""

#: Mailman/ListAdmin.py:499
msgid "Request to mailing list %(realname)s rejected"
msgstr ""

#: Mailman/MTA/Manual.py:66
msgid ""
"The mailing list `%(listname)s' has been created via the through-the-web\n"
"interface.  In order to complete the activation of this mailing list, the\n"
"proper /etc/aliases (or equivalent) file must be updated.  The program\n"
"`newaliases' may also have to be run.\n"
"\n"
"Here are the entries for the /etc/aliases file:\n"
msgstr ""

#: Mailman/MTA/Manual.py:77
msgid ""
"To finish creating your mailing list, you must edit your /etc/aliases (or\n"
"equivalent) file by adding the following lines, and possibly running the\n"
"`newaliases' program:\n"
msgstr ""

#: Mailman/MTA/Manual.py:82
msgid "## %(listname)s mailing list"
msgstr ""

#: Mailman/MTA/Manual.py:99
msgid "Mailing list creation request for list %(listname)s"
msgstr ""

#: Mailman/MTA/Manual.py:113
msgid ""
"The mailing list `%(listname)s' has been removed via the through-the-web\n"
"interface.  In order to complete the de-activation of this mailing list, "
"the\n"
"appropriate /etc/aliases (or equivalent) file must be updated.  The program\n"
"`newaliases' may also have to be run.\n"
"\n"
"Here are the entries in the /etc/aliases file that should be removed:\n"
msgstr ""

#: Mailman/MTA/Manual.py:123
msgid ""
"\n"
"To finish removing your mailing list, you must edit your /etc/aliases (or\n"
"equivalent) file by removing the following lines, and possibly running the\n"
"`newaliases' program:\n"
"\n"
"## %(listname)s mailing list"
msgstr ""

#: Mailman/MTA/Manual.py:142
msgid "Mailing list removal request for list %(listname)s"
msgstr ""

#: Mailman/MTA/Postfix.py:306
msgid "checking permissions on %(file)s"
msgstr ""

#: Mailman/MTA/Postfix.py:316
msgid "%(file)s permissions must be 066x (got %(octmode)s)"
msgstr ""

#: Mailman/MTA/Postfix.py:318 Mailman/MTA/Postfix.py:345
#: Mailman/MTA/Postfix.py:356 bin/check_perms:123 bin/check_perms:145
#: bin/check_perms:155 bin/check_perms:166 bin/check_perms:191
#: bin/check_perms:208 bin/check_perms:234 bin/check_perms:257
#: bin/check_perms:276 bin/check_perms:290 bin/check_perms:310
#: bin/check_perms:347
msgid "(fixing)"
msgstr ""

#: Mailman/MTA/Postfix.py:334
msgid "checking ownership of %(dbfile)s"
msgstr ""

#: Mailman/MTA/Postfix.py:342
msgid "%(dbfile)s owned by %(owner)s (must be owned by %(user)s"
msgstr ""

#: Mailman/MTA/Postfix.py:354
msgid "%(dbfile)s permissions must be 066x (got %(octmode)s)"
msgstr ""

#: Mailman/MailList.py:216
msgid "Your confirmation is required to join the %(listname)s mailing list"
msgstr ""

#: Mailman/MailList.py:227
msgid "Your confirmation is required to leave the %(listname)s mailing list"
msgstr ""

#: Mailman/MailList.py:880 Mailman/MailList.py:1292
msgid " from %(remote)s"
msgstr ""

#: Mailman/MailList.py:913
msgid "subscriptions to %(realname)s require moderator approval"
msgstr ""

#: Mailman/MailList.py:982 bin/add_members:242
msgid "%(realname)s subscription notification"
msgstr ""

#: Mailman/MailList.py:1001
msgid "unsubscriptions require moderator approval"
msgstr ""

#: Mailman/MailList.py:1021
msgid "%(realname)s unsubscribe notification"
msgstr ""

#: Mailman/MailList.py:1201
msgid "subscriptions to %(name)s require administrator approval"
msgstr ""

#: Mailman/MailList.py:1464
msgid "Last autoresponse notification for today"
msgstr ""

#: Mailman/Queue/BounceRunner.py:310
msgid ""
"The attached message was received as a bounce, but either the bounce format\n"
"was not recognized, or no member addresses could be extracted from it.  "
"This\n"
"mailing list has been configured to send all unrecognized bounce messages "
"to\n"
"the list administrator(s).\n"
"\n"
"For more information see:\n"
"%(adminurl)s\n"
"\n"
msgstr ""

#: Mailman/Queue/BounceRunner.py:320
msgid "Uncaught bounce notification"
msgstr ""

#: Mailman/Queue/CommandRunner.py:92
msgid "Ignoring non-text/plain MIME parts"
msgstr ""

#: Mailman/Queue/CommandRunner.py:148
msgid ""
"The results of your email command are provided below.\n"
"Attached is your original message.\n"
msgstr ""

#: Mailman/Queue/CommandRunner.py:153
msgid "- Results:"
msgstr ""

#: Mailman/Queue/CommandRunner.py:159
msgid ""
"\n"
"- Unprocessed:"
msgstr ""

#: Mailman/Queue/CommandRunner.py:163
msgid ""
"No commands were found in this message.\n"
"To obtain instructions, send a message containing just the word \"help\".\n"
msgstr ""

#: Mailman/Queue/CommandRunner.py:168
msgid ""
"\n"
"- Ignored:"
msgstr ""

#: Mailman/Queue/CommandRunner.py:170
msgid ""
"\n"
"- Done.\n"
"\n"
msgstr ""

#: Mailman/Queue/CommandRunner.py:194
msgid "The results of your email commands"
msgstr ""

#: Mailman/htmlformat.py:627
msgid "Delivered by Mailman<br>version %(version)s"
msgstr ""

#: Mailman/htmlformat.py:628
msgid "Python Powered"
msgstr ""

#: Mailman/htmlformat.py:629
msgid "Gnu's Not Unix"
msgstr ""

#: Mailman/i18n.py:98
msgid "Mon"
msgstr ""

#: Mailman/i18n.py:98
msgid "Thu"
msgstr ""

#: Mailman/i18n.py:98
msgid "Tue"
msgstr ""

#: Mailman/i18n.py:98
msgid "Wed"
msgstr ""

#: Mailman/i18n.py:99
msgid "Fri"
msgstr ""

#: Mailman/i18n.py:99
msgid "Sat"
msgstr ""

#: Mailman/i18n.py:99
msgid "Sun"
msgstr ""

#: Mailman/i18n.py:103
msgid "Apr"
msgstr ""

#: Mailman/i18n.py:103
msgid "Feb"
msgstr ""

#: Mailman/i18n.py:103
msgid "Jan"
msgstr ""

#: Mailman/i18n.py:103
msgid "Jun"
msgstr ""

#: Mailman/i18n.py:103
msgid "Mar"
msgstr ""

#: Mailman/i18n.py:104
msgid "Aug"
msgstr ""

#: Mailman/i18n.py:104
msgid "Dec"
msgstr ""

#: Mailman/i18n.py:104
msgid "Jul"
msgstr ""

#: Mailman/i18n.py:104
msgid "Nov"
msgstr ""

#: Mailman/i18n.py:104
msgid "Oct"
msgstr ""

#: Mailman/i18n.py:104
msgid "Sep"
msgstr ""

#: Mailman/i18n.py:107
msgid "Server Local Time"
msgstr ""

#: Mailman/i18n.py:146
msgid ""
"%(wday)s %(mon)s %(day)2i %(hh)02i:%(mm)02i:%(ss)02i %(tzname)s %(year)04i"
msgstr ""

#: bin/add_members:26
msgid ""
"Add members to a list from the command line.\n"
"\n"
"Usage:\n"
"    add_members [options] listname\n"
"\n"
"Options:\n"
"\n"
"    --regular-members-file=file\n"
"    -r file\n"
"        A file containing addresses of the members to be added, one\n"
"        address per line.  This list of people become non-digest\n"
"        members.  If file is `-', read addresses from stdin.  Note that\n"
"        -n/--non-digest-members-file are deprecated synonyms for this "
"option.\n"
"\n"
"    --digest-members-file=file\n"
"    -d file\n"
"        Similar to above, but these people become digest members.\n"
"\n"
"    --welcome-msg=<y|n>\n"
"    -w <y|n>\n"
"        Set whether or not to send the list members a welcome message,\n"
"        overriding whatever the list's `send_welcome_msg' setting is.\n"
"\n"
"    --admin-notify=<y|n>\n"
"    -a <y|n>\n"
"        Set whether or not to send the list administrators a notification "
"on\n"
"        the success/failure of these subscriptions, overriding whatever the\n"
"        list's `admin_notify_mchanges' setting is.\n"
"\n"
"    --help\n"
"    -h\n"
"        Print this help message and exit.\n"
"\n"
"    listname\n"
"        The name of the Mailman list you are adding members to.  It must\n"
"        already exist.\n"
"\n"
"You must supply at least one of -r and -d options.  At most one of the\n"
"files can be `-'.\n"
msgstr ""

#: bin/add_members:137
msgid "Already a member: %(member)s"
msgstr ""

#: bin/add_members:140
msgid "Bad/Invalid email address: blank line"
msgstr ""

#: bin/add_members:142
msgid "Bad/Invalid email address: %(member)s"
msgstr ""

#: bin/add_members:144
msgid "Hostile address (illegal characters): %(member)s"
msgstr ""

#: bin/add_members:146
msgid "Subscribed: %(member)s"
msgstr ""

#: bin/add_members:191
msgid "Bad argument to -w/--welcome-msg: %(arg)s"
msgstr ""

#: bin/add_members:198
msgid "Bad argument to -a/--admin-notify: %(arg)s"
msgstr ""

#: bin/add_members:204
msgid "Cannot read both digest and normal members from standard input."
msgstr ""

#: bin/add_members:210 bin/config_list:109 bin/config_list.orig:105
#: bin/find_member:97 bin/inject:90 bin/list_admins:89 bin/list_members:232
#: bin/sync_members:222 cron/bumpdigests:86
msgid "No such list: %(listname)s"
msgstr ""

#: bin/add_members:230 bin/change_pw:158 bin/check_db:114 bin/discard:83
#: bin/sync_members:244 bin/update:564 cron/bumpdigests:78
msgid "Nothing to do."
msgstr ""

#: bin/arch:19
msgid ""
"Rebuild a list's archive.\n"
"\n"
"Use this command to rebuild the archives for a mailing list.  You may want "
"to\n"
"do this if you edit some messages in an archive, or remove some messages "
"from\n"
"an archive.\n"
"\n"
"Usage: %(PROGRAM)s [options] <listname> [<mbox>]\n"
"\n"
"Where options are:\n"
"    -h / --help\n"
"        Print this help message and exit.\n"
"\n"
"    -q / --quiet\n"
"        Make the archiver output less verbose.\n"
"\n"
"    --wipe\n"
"        First wipe out the original archive before regenerating.  You "
"usually\n"
"        want to specify this argument unless you're generating the archive "
"in\n"
"        chunks.\n"
"\n"
"    -s N\n"
"    --start=N\n"
"        Start indexing at article N, where article 0 is the first in the "
"mbox.\n"
"        Defaults to 0.\n"
"\n"
"    -e M\n"
"    --end=M\n"
"        End indexing at article M.  This script is not very efficient with\n"
"        respect to memory management, and for large archives, it may not be\n"
"        possible to index the mbox entirely.  For that reason, you can "
"specify\n"
"        the start and end article numbers.\n"
"\n"
"Where <mbox> is the path to a list's complete mbox archive.  Usually this "
"will\n"
"be some path in the archives/private directory.  For example:\n"
"\n"
"%% bin/arch mylist archives/private/mylist.mbox/mylist.mbox\n"
"\n"
"<mbox> is optional.  If it is missing, it is calculated.\n"
msgstr ""

#: bin/arch:125
msgid "listname is required"
msgstr ""

#: bin/arch:143 bin/change_pw:106 bin/config_list:256 bin/config_list.orig:242
msgid ""
"No such list \"%(listname)s\"\n"
"%(e)s"
msgstr ""

#: bin/arch:183
msgid "Cannot open mbox file %(mbox)s: %(msg)s"
msgstr ""

#: bin/b4b5-archfix:19
msgid ""
"Fix the MM2.1b4 archives.\n"
"\n"
"Usage: %(PROGRAM)s [options] file ...\n"
"\n"
"Where options are:\n"
"    -h / --help\n"
"        Print this help message and exit.\n"
"\n"
"Only use this to `fix' some archive database files that may have gotten\n"
"written in Mailman 2.1b4 with some bogus data.  Use like this from your\n"
"$PREFIX directory\n"
"\n"
"%% %(PROGRAM)s `grep -l _mlist archives/private/*/database/*-article`\n"
"\n"
"(note the backquotes are required)\n"
"\n"
"You will need to run `bin/check_perms -f' after running this script.\n"
msgstr ""

#: bin/change_pw:19
msgid ""
"Change a list's password.\n"
"\n"
"Prior to Mailman 2.1, list passwords were kept in crypt'd format -- "
"usually.\n"
"Some Python installations didn't have the crypt module available, so they'd\n"
"fall back to md5.  Then suddenly the Python installation might grow a crypt\n"
"module and all list passwords would be broken.\n"
"\n"
"In Mailman 2.1, all list and site passwords are stored in SHA1 hexdigest\n"
"form.  This breaks list passwords for all existing pre-Mailman 2.1 lists, "
"and\n"
"since those passwords aren't stored anywhere in plain text, they cannot be\n"
"retrieved and updated.\n"
"\n"
"Thus, this script generates new passwords for a list, and optionally sends "
"it\n"
"to all the owners of the list.\n"
"\n"
"Usage: change_pw [options]\n"
"\n"
"Options:\n"
"\n"
"    --all / -a\n"
"        Change the password for all lists.\n"
"\n"
"    --domain=domain\n"
"    -d domain\n"
"        Change the password for all lists in the virtual domain `domain'.  "
"It\n"
"        is okay to give multiple -d options.\n"
"\n"
"    --listname=listname\n"
"    -l listname\n"
"        Change the password only for the named list.  It is okay to give\n"
"        multiple -l options.\n"
"\n"
"    --password=newpassword\n"
"    -p newpassword\n"
"        Use the supplied plain text password `newpassword' as the new "
"password\n"
"        for any lists that are being changed (as specified by the -a, -d, "
"and\n"
"        -l options).  If not given, lists will be assigned a randomly\n"
"        generated new password.\n"
"\n"
"    --quiet / -q\n"
"        Don't notify list owners of the new password.  You'll have to have\n"
"        some other way of letting the list owners know the new password\n"
"        (presumably out-of-band).\n"
"\n"
"    --help / -h\n"
"        Print this help message and exit.\n"
msgstr ""

#: bin/change_pw:144
msgid "Bad arguments: %(strargs)s"
msgstr ""

#: bin/change_pw:148
msgid "Empty list passwords are not allowed"
msgstr ""

#: bin/change_pw:180
msgid "New %(listname)s password: %(notifypassword)s"
msgstr ""

#: bin/change_pw:189
msgid "Your new %(listname)s list password"
msgstr ""

#: bin/change_pw:190
msgid ""
"The site administrator at %(hostname)s has changed the password for your\n"
"mailing list %(listname)s.  It is now\n"
"\n"
"    %(notifypassword)s\n"
"\n"
"Please be sure to use this for all future list administration.  You may "
"want\n"
"to log in now to your list and change the password to something more to "
"your\n"
"liking.  Visit your list admin page at\n"
"\n"
"    %(adminurl)s\n"
msgstr ""

#: bin/check_db:19
msgid ""
"Check a list's config database file for integrity.\n"
"\n"
"All of the following files are checked:\n"
"\n"
"    config.pck\n"
"    config.pck.last\n"
"    config.db\n"
"    config.db.last\n"
"    config.safety\n"
"\n"
"It's okay if any of these are missing.  config.pck and config.pck.last are\n"
"pickled versions of the config database file for 2.1a3 and beyond.  config."
"db\n"
"and config.db.last are used in all earlier versions, and these are Python\n"
"marshals.  config.safety is a pickle written by 2.1a3 and beyond when the\n"
"primary config.pck file could not be read.\n"
"\n"
"Usage: %(PROGRAM)s [options] [listname [listname ...]]\n"
"\n"
"Options:\n"
"\n"
"    --all / -a\n"
"        Check the databases for all lists.  Otherwise only the lists named "
"on\n"
"        the command line are checked.\n"
"\n"
"    --verbose / -v\n"
"        Verbose output.  The state of every tested file is printed.\n"
"        Otherwise only corrupt files are displayed.\n"
"\n"
"    --help / -h\n"
"        Print this text and exit.\n"
msgstr ""

#: bin/check_db:119
msgid "No list named:"
msgstr ""

#: bin/check_db:128
msgid "List:"
msgstr ""

#: bin/check_db:148
msgid "   %(file)s: okay"
msgstr ""

#: bin/check_perms:19
msgid ""
"Check the permissions for the Mailman installation.\n"
"\n"
"Usage: %(PROGRAM)s [-f] [-v] [-h]\n"
"\n"
"With no arguments, just check and report all the files that have bogus\n"
"permissions or group ownership.  With -f (and run as root), fix all the\n"
"permission problems found.  With -v be verbose.\n"
msgstr ""

#: bin/check_perms:108
msgid "    checking gid and mode for %(path)s"
msgstr ""

#: bin/check_perms:120
msgid "%(path)s bad group (has: %(groupname)s, expected %(MAILMAN_GROUP)s)"
msgstr ""

#: bin/check_perms:143
msgid "directory permissions must be %(octperms)s: %(path)s"
msgstr ""

#: bin/check_perms:152
msgid "source perms must be %(octperms)s: %(path)s"
msgstr ""

#: bin/check_perms:163
msgid "article db files must be %(octperms)s: %(path)s"
msgstr ""

#: bin/check_perms:175
msgid "checking mode for %(prefix)s"
msgstr ""

#: bin/check_perms:185
msgid "WARNING: directory does not exist: %(d)s"
msgstr ""

#: bin/check_perms:189
msgid "directory must be at least 02775: %(d)s"
msgstr ""

#: bin/check_perms:201
msgid "checking perms on %(private)s"
msgstr ""

#: bin/check_perms:206
msgid "%(private)s must not be other-readable"
msgstr ""

#: bin/check_perms:215
msgid ""
"Warning: Private archive directory is other-executable (o+x).\n"
"         This could allow other users on your system to read private "
"archives.\n"
"         If you're on a shared multiuser system, you should consult the\n"
"         installation manual on how to fix this."
msgstr ""

#: bin/check_perms:232
msgid "mbox file must be at least 0660:"
msgstr ""

#: bin/check_perms:255
msgid "%(dbdir)s \"other\" perms must be 000"
msgstr ""

#: bin/check_perms:265
msgid "checking cgi-bin permissions"
msgstr ""

#: bin/check_perms:270
msgid "    checking set-gid for %(path)s"
msgstr ""

#: bin/check_perms:274
msgid "%(path)s must be set-gid"
msgstr ""

#: bin/check_perms:284
msgid "checking set-gid for %(wrapper)s"
msgstr ""

#: bin/check_perms:288
msgid "%(wrapper)s must be set-gid"
msgstr ""

#: bin/check_perms:298
msgid "checking permissions on %(pwfile)s"
msgstr ""

#: bin/check_perms:307
msgid "%(pwfile)s permissions must be exactly 0640 (got %(octmode)s)"
msgstr ""

#: bin/check_perms:331
msgid "checking permissions on list data"
msgstr ""

#: bin/check_perms:337
msgid "    checking permissions on: %(path)s"
msgstr ""

#: bin/check_perms:345
msgid "file permissions must be at least 660: %(path)s"
msgstr ""

#: bin/check_perms:390
msgid "No problems found"
msgstr ""

#: bin/check_perms:392
msgid "Problems found:"
msgstr ""

#: bin/check_perms:393
msgid "Re-run as %(MAILMAN_USER)s (or root) with -f flag to fix"
msgstr ""

#: bin/cleanarch:20
msgid ""
"Clean up an .mbox archive file.\n"
"\n"
"The archiver looks for Unix-From lines separating messages in an mbox "
"archive\n"
"file.  For compatibility, it specifically looks for lines that start with\n"
"\"From \" -- i.e. the letters capital-F, lowercase-r, o, m, space, ignoring\n"
"everything else on the line.\n"
"\n"
"Normally, any lines that start \"From \" in the body of a message should be\n"
"escaped such that a > character is actually the first on a line.  It is\n"
"possible though that body lines are not actually escaped.  This script\n"
"attempts to fix these by doing a stricter test of the Unix-From lines.  Any\n"
"lines that start \"From \" but do not pass this stricter test are escaped "
"with a\n"
"> character.\n"
"\n"
"Usage: cleanarch [options] < inputfile > outputfile\n"
"Options:\n"
"    -s n\n"
"    --status=n\n"
"        Print a # character every n lines processed\n"
"\n"
"    -q / --quiet\n"
"        Don't print changed line information to standard error.\n"
"\n"
"    -n / --dry-run\n"
"        Don't actually output anything.\n"
"\n"
"    -h / --help\n"
"        Print this message and exit\n"
msgstr ""

#: bin/cleanarch:83
msgid "Unix-From line changed: %(lineno)d"
msgstr ""

#: bin/cleanarch:111
msgid "Bad status number: %(arg)s"
msgstr ""

#: bin/cleanarch:167
msgid "%(messages)d messages found"
msgstr ""

#: bin/clone_member:19
msgid ""
"Clone a member address.\n"
"\n"
"Cloning a member address means that a new member will be added who has all "
"the\n"
"same options and passwords as the original member address.  Note that this\n"
"operation is fairly trusting of the user who runs it -- it does no\n"
"verification to the new address, it does not send out a welcome message, "
"etc.\n"
"\n"
"The existing member's subscription is usually not modified in any way.  If "
"you\n"
"want to remove the old address, use the -r flag.  If you also want to "
"change\n"
"any list admin addresses, use the -a flag.\n"
"\n"
"Usage:\n"
"    clone_member [options] fromoldaddr tonewaddr\n"
"\n"
"Where:\n"
"\n"
"    --listname=listname\n"
"    -l listname\n"
"        Check and modify only the named mailing lists.  If -l is not given,\n"
"        then all mailing lists are scanned from the address.  Multiple -l\n"
"        options can be supplied.\n"
"\n"
"    --remove\n"
"    -r\n"
"        Remove the old address from the mailing list after it's been "
"cloned.\n"
"\n"
"    --admin\n"
"    -a\n"
"        Scan the list admin addresses for the old address, and clone or "
"change\n"
"        them too.\n"
"\n"
"    --quiet\n"
"    -q\n"
"        Do the modifications quietly.\n"
"\n"
"    --nomodify\n"
"    -n\n"
"        Print what would be done, but don't actually do it.  Inhibits the\n"
"        --quiet flag.\n"
"\n"
"    --help\n"
"    -h\n"
"        Print this help message and exit.\n"
"\n"
" fromoldaddr (`from old address') is the old address of the user.  "
"tonewaddr\n"
" (`to new address') is the new address of the user.\n"
"\n"
msgstr ""

#: bin/clone_member:94
msgid "processing mailing list:"
msgstr ""

#: bin/clone_member:101
msgid "    scanning list owners:"
msgstr ""

#: bin/clone_member:119
msgid "    new list owners:"
msgstr ""

#: bin/clone_member:121
msgid "(no change)"
msgstr ""

#: bin/clone_member:130
msgid "    address not found:"
msgstr ""

#: bin/clone_member:139
msgid "    clone address added:"
msgstr ""

#: bin/clone_member:142
msgid "    clone address is already a member:"
msgstr ""

#: bin/clone_member:145
msgid "    original address removed:"
msgstr ""

#: bin/clone_member:196
msgid "Not a valid email address: %(toaddr)s"
msgstr ""

#: bin/clone_member:209
msgid ""
"Error opening list \"%(listname)s\", skipping.\n"
"%(e)s"
msgstr ""

#: bin/config_list:20 bin/config_list.orig:19
msgid ""
"Configure a list from a text file description.\n"
"\n"
"Usage: config_list [options] listname\n"
"\n"
"Options:\n"
"    --inputfile filename\n"
"    -i filename\n"
"        Configure the list by assigning each module-global variable in the\n"
"        file to an attribute on the list object, then saving the list.  The\n"
"        named file is loaded with execfile() and must be legal Python code.\n"
"        Any variable that isn't already an attribute of the list object is\n"
"        ignored (a warning message is printed).  See also the -c option.\n"
"\n"
"        A special variable named `mlist' is put into the globals during the\n"
"        execfile, which is bound to the actual MailList object.  This lets "
"you\n"
"        do all manner of bizarre thing to the list object, but BEWARE!  "
"Using\n"
"        this can severely (and possibly irreparably) damage your mailing "
"list!\n"
"\n"
"    --outputfile filename\n"
"    -o filename\n"
"        Instead of configuring the list, print out a list's configuration\n"
"        variables in a format suitable for input using this script.  In "
"this\n"
"        way, you can easily capture the configuration settings for a\n"
"        particular list and imprint those settings on another list.  "
"filename\n"
"        is the file to output the settings to.  If filename is `-', "
"standard\n"
"        out is used.\n"
"\n"
"    --checkonly\n"
"    -c\n"
"        With this option, the modified list is not actually changed.  Only\n"
"        useful with -i.\n"
"\n"
"    --verbose\n"
"    -v\n"
"        Print the name of each attribute as it is being changed.  Only "
"useful\n"
"        with -i.\n"
"\n"
"    --help\n"
"    -h\n"
"        Print this help message and exit.\n"
"\n"
"The options -o and -i are mutually exclusive.\n"
"\n"
msgstr ""

#: bin/config_list:117
msgid ""
"# -*- python -*-\n"
"# -*- coding: %(charset)s -*-\n"
"## \"%(listname)s\" mailing list configuration settings\n"
"## captured on %(when)s\n"
msgstr ""

#: bin/config_list:143 bin/config_list.orig:131
msgid "options"
msgstr ""

#: bin/config_list:202 bin/config_list.orig:188
msgid "legal values are:"
msgstr ""

#: bin/config_list:269 bin/config_list.orig:255
msgid "attribute \"%(k)s\" ignored"
msgstr ""

#: bin/config_list:272 bin/config_list.orig:258
msgid "attribute \"%(k)s\" changed"
msgstr ""

#: bin/config_list:278 bin/config_list.orig:264
msgid "Non-standard property restored: %(k)s"
msgstr ""

#: bin/config_list:286 bin/config_list.orig:272
msgid "Invalid value for property: %(k)s"
msgstr ""

#: bin/config_list:288 bin/config_list.orig:274
msgid "Bad email address for option %(k)s: %(v)s"
msgstr ""

#: bin/config_list:345 bin/config_list.orig:331
msgid "Only one of -i or -o is allowed"
msgstr ""

#: bin/config_list:347 bin/config_list.orig:333
msgid "One of -i or -o is required"
msgstr ""

#: bin/config_list:351 bin/config_list.orig:337
msgid "List name is required"
msgstr ""

#: bin/config_list.orig:109
msgid ""
"## \"%(listname)s\" mailing list configuration settings -*- python -*-\n"
"## captured on %(when)s\n"
msgstr ""

#: bin/convert.py:19
msgid ""
"Convert a list's interpolation strings from %-strings to $-strings.\n"
"\n"
"This script is intended to be run as a bin/withlist script, i.e.\n"
"\n"
"% bin/withlist -l -r convert <mylist>\n"
msgstr ""

#: bin/convert.py:38 bin/fix_url.py:85
msgid "Saving list"
msgstr ""

#: bin/convert.py:44 bin/fix_url.py:51 bin/reset_pw.py:57
msgid "%%%"
msgstr ""

#: bin/discard:19
msgid ""
"Discard held messages.\n"
"\n"
"Usage:\n"
"    discard [options] file ...\n"
"\n"
"Options:\n"
"    --help / -h\n"
"        Print this help message and exit.\n"
"\n"
"    --quiet / -q\n"
"        Don't print status messages.\n"
msgstr ""

#: bin/discard:94
msgid "Ignoring non-held message: %(f)s"
msgstr ""

#: bin/discard:100
msgid "Ignoring held msg w/bad id: %(f)s"
msgstr ""

#: bin/discard:112
msgid "Discarded held msg #%(id)s for list %(listname)s"
msgstr ""

#: bin/dumpdb:19
msgid ""
"Dump the contents of any Mailman `database' file.\n"
"\n"
"Usage: %(PROGRAM)s [options] filename\n"
"\n"
"Options:\n"
"\n"
"    --marshal/-m\n"
"        Assume the file contains a Python marshal, overridding any "
"automatic\n"
"        guessing.\n"
"\n"
"    --pickle/-p\n"
"        Assume the file contains a Python pickle, overridding any automatic\n"
"        guessing.\n"
"\n"
"    --noprint/-n\n"
"        Don't attempt to pretty print the object.  This is useful if "
"there's\n"
"        some problem with the object and you just want to get an unpickled\n"
"        representation.  Useful with `python -i bin/dumpdb <file>'.  In "
"that\n"
"        case, the root of the tree will be left in a global called \"msg\".\n"
"\n"
"    --help/-h\n"
"        Print this help message and exit\n"
"\n"
"If the filename ends with `.db', then it is assumed that the file contains "
"a\n"
"Python marshal.  If the file ends with `.pck' then it is assumed to contain "
"a\n"
"Python pickle.  In either case, if you want to override the default "
"assumption\n"
"-- or if the file ends in neither suffix -- use the -p or -m flags.\n"
msgstr ""

#: bin/dumpdb:106
msgid "No filename given."
msgstr ""

#: bin/dumpdb:109
msgid "Bad arguments: %(pargs)s"
msgstr ""

#: bin/dumpdb:119
msgid "Please specify either -p or -m."
msgstr ""

#: bin/dumpdb:136
msgid "[----- start pickle file -----]"
msgstr ""

#: bin/dumpdb:142
msgid "[----- end pickle file -----]"
msgstr ""

#: bin/dumpdb:145
msgid "<----- start object %(cnt)s ----->"
msgstr ""

#: bin/find_member:19
msgid ""
"Find all lists that a member's address is on.\n"
"\n"
"Usage:\n"
"    find_member [options] regex [regex [...]]\n"
"\n"
"Where:\n"
"    --listname=listname\n"
"    -l listname\n"
"        Include only the named list in the search.\n"
"\n"
"    --exclude=listname\n"
"    -x listname\n"
"        Exclude the named list from the search.\n"
"\n"
"    --owners\n"
"    -w\n"
"        Search list owners as well as members.\n"
"\n"
"    --help\n"
"    -h\n"
"        Print this help message and exit.\n"
"\n"
"    regex\n"
"        A Python regular expression to match against.\n"
"\n"
"The interaction between -l and -x is as follows.  If any -l option is given\n"
"then only the named list will be included in the search.  If any -x option "
"is\n"
"given but no -l option is given, then all lists will be search except those\n"
"specifically excluded.\n"
"\n"
"Regular expression syntax is Perl5-like, using the Python re module.  "
"Complete\n"
"specifications are at:\n"
"\n"
"http://www.python.org/doc/current/lib/module-re.html\n"
"\n"
"Address matches are case-insensitive, but case-preserved addresses are\n"
"displayed.\n"
"\n"
msgstr ""

#: bin/find_member:159
msgid "Search regular expression required"
msgstr ""

#: bin/find_member:164
msgid "No lists to search"
msgstr ""

#: bin/find_member:173
msgid "found in:"
msgstr ""

#: bin/find_member:179
msgid "(as owner)"
msgstr ""

#: bin/fix_url.py:19
msgid ""
"Reset a list's web_page_url attribute to the default setting.\n"
"\n"
"This script is intended to be run as a bin/withlist script, i.e.\n"
"\n"
"% bin/withlist -l -r fix_url listname [options]\n"
"\n"
"Options:\n"
"    -u urlhost\n"
"    --urlhost=urlhost\n"
"        Look up urlhost in the virtual host table and set the web_page_url "
"and\n"
"        host_name attributes of the list to the values found.  This\n"
"        essentially moves the list from one virtual domain to another.\n"
"\n"
"        Without this option, the default web_page_url and host_name values "
"are\n"
"        used.\n"
"\n"
"    -v / --verbose\n"
"        Print what the script is doing.\n"
"\n"
"If run standalone, it prints this help text and exits.\n"
msgstr ""

#: bin/fix_url.py:80
msgid "Setting web_page_url to: %(web_page_url)s"
msgstr ""

#: bin/fix_url.py:83
msgid "Setting host_name to: %(mailhost)s"
msgstr ""

#: bin/genaliases:19
msgid ""
"Regenerate Mailman specific aliases from scratch.\n"
"\n"
"The actual output depends on the value of the `MTA' variable in your mm_cfg."
"py\n"
"file.\n"
"\n"
"Usage: genaliases [options]\n"
"Options:\n"
"\n"
"    -q/--quiet\n"
"        Some MTA output can include more verbose help text.  Use this to "
"tone\n"
"        down the verbosity.\n"
"\n"
"    -h/--help\n"
"        Print this message and exit.\n"
msgstr ""

#: bin/inject:19
msgid ""
"Inject a message from a file into Mailman's incoming queue.\n"
"\n"
"Usage: inject [options] [filename]\n"
"\n"
"Options:\n"
"\n"
"    -h / --help\n"
"        Print this text and exit.\n"
"\n"
"    -l listname\n"
"    --listname=listname\n"
"        The name of the list to inject this message to.  Required.\n"
"\n"
"    -q queuename\n"
"    --queue=queuename\n"
"        The name of the queue to inject the message to.  The queuename must "
"be\n"
"        one of the directories inside the qfiles directory.  If omitted, "
"the\n"
"        incoming queue is used.\n"
"\n"
"filename is the name of the plaintext message file to inject.  If omitted,\n"
"standard input is used.\n"
msgstr ""

#: bin/inject:83
msgid "Bad queue directory: %(qdir)s"
msgstr ""

#: bin/inject:88
msgid "A list name is required"
msgstr ""

#: bin/list_admins:19
msgid ""
"List all the owners of a mailing list.\n"
"\n"
"Usage: %(program)s [options] listname ...\n"
"\n"
"Where:\n"
"\n"
"    --all-vhost=vhost\n"
"    -v=vhost\n"
"        List the owners of all the mailing lists for the given virtual "
"host.\n"
"\n"
"    --all\n"
"    -a\n"
"        List the owners of all the mailing lists on this system.\n"
"\n"
"    --help\n"
"    -h\n"
"        Print this help message and exit.\n"
"\n"
"`listname' is the name of the mailing list to print the owners of.  You can\n"
"have more than one named list on the command line.\n"
msgstr ""

#: bin/list_admins:96
msgid "List: %(listname)s, \tOwners: %(owners)s"
msgstr ""

#: bin/list_lists:19
msgid ""
"List all mailing lists.\n"
"\n"
"Usage: %(program)s [options]\n"
"\n"
"Where:\n"
"\n"
"    -a / --advertised\n"
"        List only those mailing lists that are publically advertised\n"
"\n"
"    --virtual-host-overview=domain\n"
"    -V domain\n"
"        List only those mailing lists that are homed to the given virtual\n"
"        domain.  This only works if the VIRTUAL_HOST_OVERVIEW variable is\n"
"        set.\n"
"\n"
"    -b / --bare\n"
"        Displays only the list name, with no description.\n"
"\n"
"    -h / --help\n"
"        Print this text and exit.\n"
"\n"
msgstr ""

#: bin/list_lists:105
msgid "No matching mailing lists found"
msgstr ""

#: bin/list_lists:109
msgid "matching mailing lists found:"
msgstr ""

#: bin/list_members:19
msgid ""
"List all the members of a mailing list.\n"
"\n"
"Usage: %(PROGRAM)s [options] listname\n"
"\n"
"Where:\n"
"\n"
"    --output file\n"
"    -o file\n"
"        Write output to specified file instead of standard out.\n"
"\n"
"    --regular / -r\n"
"        Print just the regular (non-digest) members.\n"
"\n"
"    --digest[=kind] / -d [kind]\n"
"        Print just the digest members.  Optional argument can be \"mime\" "
"or\n"
"        \"plain\" which prints just the digest members receiving that kind "
"of\n"
"        digest.\n"
"\n"
"    --nomail[=why] / -n [why]\n"
"        Print the members that have delivery disabled.  Optional argument "
"can\n"
"        be \"byadmin\", \"byuser\", \"bybounce\", or \"unknown\" which "
"prints just the\n"
"        users who have delivery disabled for that reason.  It can also be\n"
"        \"enabled\" which prints just those member for whom delivery is\n"
"        enabled.\n"
"\n"
"    --fullnames / -f\n"
"        Include the full names in the output.\n"
"\n"
"    --preserve / -p\n"
"        Output member addresses case preserved the way they were added to "
"the\n"
"        list.  Otherwise, addresses are printed in all lowercase.\n"
"\n"
"    --invalid / -i\n"
"        Print only the addresses in the membership list that are invalid.\n"
"        Ignores -r, -d, -n.\n"
"\n"
"    --unicode / -u\n"
"        Print addresses which are stored as Unicode objects instead of "
"normal\n"
"        string objects.  Ignores -r, -d, -n.\n"
"\n"
"    --help\n"
"    -h\n"
"        Print this help message and exit.\n"
"\n"
"    listname is the name of the mailing list to use.\n"
"\n"
"Note that if neither -r or -d is supplied, both regular members are printed\n"
"first, followed by digest members, but no indication is given as to address\n"
"status.\n"
msgstr ""

#: bin/list_members:191
msgid "Bad --nomail option: %(why)s"
msgstr ""

#: bin/list_members:202
msgid "Bad --digest option: %(kind)s"
msgstr ""

#: bin/list_members:224
msgid "Could not open file for writing:"
msgstr ""

#: bin/list_owners:19
msgid ""
"List the owners of a mailing list, or all mailing lists.\n"
"\n"
"Usage: %(PROGRAM)s [options] [listname ...]\n"
"Options:\n"
"\n"
"    -w / --with-listnames\n"
"        Group the owners by list names and include the list names in the\n"
"        output.  Otherwise, the owners will be sorted and uniquified based "
"on\n"
"        the email address.\n"
"\n"
"    -m / --moderators\n"
"        Include the list moderators in the output.\n"
"\n"
"    -h / --help\n"
"        Print this help message and exit.\n"
"\n"
"    listname\n"
"        Print the owners of the specified lists.  More than one can appear\n"
"        after the options.  If there are no listnames provided, the owners "
"of\n"
"        all the lists will be displayed.\n"
msgstr ""

#: bin/mailmanctl:20
msgid ""
"Primary start-up and shutdown script for Mailman's qrunner daemon.\n"
"\n"
"This script starts, stops, and restarts the main Mailman queue runners, "
"making\n"
"sure that the various long-running qrunners are still alive and kicking.  "
"It\n"
"does this by forking and exec'ing the qrunners and waiting on their pids.\n"
"When it detects a subprocess has exited, it may restart it.\n"
"\n"
"The qrunners respond to SIGINT, SIGTERM, and SIGHUP.  SIGINT and SIGTERM "
"both\n"
"cause the qrunners to exit cleanly, but the master will only restart "
"qrunners\n"
"that have exited due to a SIGINT.  SIGHUP causes the master and the "
"qrunners\n"
"to close their log files, and reopen then upon the next printed message.\n"
"\n"
"The master also responds to SIGINT, SIGTERM, and SIGHUP, which it simply\n"
"passes on to the qrunners (note that the master will close and reopen its "
"own\n"
"log files on receipt of a SIGHUP).  The master also leaves its own process "
"id\n"
"in the file data/master-qrunner.pid but you normally don't need to use this\n"
"pid directly.  The `start', `stop', `restart', and `reopen' commands handle\n"
"everything for you.\n"
"\n"
"Usage: %(PROGRAM)s [options] [ start | stop | restart | reopen ]\n"
"\n"
"Options:\n"
"\n"
"    -n/--no-restart\n"
"        Don't restart the qrunners when they exit because of an error or a\n"
"        SIGINT.  They are never restarted if they exit in response to a\n"
"        SIGTERM.  Use this only for debugging.  Only useful if the `start'\n"
"        command is given.\n"
"\n"
"    -u/--run-as-user\n"
"        Normally, this script will refuse to run if the user id and group "
"id\n"
"        are not set to the `mailman' user and group (as defined when you\n"
"        configured Mailman).  If run as root, this script will change to "
"this\n"
"        user and group before the check is made.\n"
"\n"
"        This can be inconvenient for testing and debugging purposes, so the -"
"u\n"
"        flag means that the step that sets and checks the uid/gid is "
"skipped,\n"
"        and the program is run as the current user and group.  This flag is\n"
"        not recommended for normal production environments.\n"
"\n"
"        Note though, that if you run with -u and are not in the mailman "
"group,\n"
"        you may have permission problems, such as begin unable to delete a\n"
"        list's archives through the web.  Tough luck!\n"
"\n"
"    -s/--stale-lock-cleanup\n"
"        If mailmanctl finds an existing master lock, it will normally exit\n"
"        with an error message.  With this option, mailmanctl will perform "
"an\n"
"        extra level of checking.  If a process matching the host/pid "
"described\n"
"        in the lock file is running, mailmanctl will still exit, but if no\n"
"        matching process is found, mailmanctl will remove the apparently "
"stale\n"
"        lock and make another attempt to claim the master lock.\n"
"\n"
"    -q/--quiet\n"
"        Don't print status messages.  Error messages are still printed to\n"
"        standard error.\n"
"\n"
"    -h/--help\n"
"        Print this message and exit.\n"
"\n"
"Commands:\n"
"\n"
"    start   - Start the master daemon and all qrunners.  Prints a message "
"and\n"
"              exits if the master daemon is already running.\n"
"\n"
"    stop    - Stops the master daemon and all qrunners.  After stopping, no\n"
"              more messages will be processed.\n"
"\n"
"    restart - Restarts the qrunners, but not the master process.  Use this\n"
"              whenever you upgrade or update Mailman so that the qrunners "
"will\n"
"              use the newly installed code.\n"
"\n"
"    reopen  - This will close all log files, causing them to be re-opened "
"the\n"
"              next time a message is written to them\n"
msgstr ""

#: bin/mailmanctl:152
msgid "PID unreadable in: %(pidfile)s"
msgstr ""

#: bin/mailmanctl:154
msgid "Is qrunner even running?"
msgstr ""

#: bin/mailmanctl:160
msgid "No child with pid: %(pid)s"
msgstr ""

#: bin/mailmanctl:162
msgid "Stale pid file removed."
msgstr ""

#: bin/mailmanctl:220
msgid ""
"The master qrunner lock could not be acquired because it appears as if "
"another\n"
"master qrunner is already running.\n"
msgstr ""

#: bin/mailmanctl:226
msgid ""
"The master qrunner lock could not be acquired.  It appears as though there "
"is\n"
"a stale master qrunner lock.  Try re-running mailmanctl with the -s flag.\n"
msgstr ""

#: bin/mailmanctl:232
msgid ""
"The master qrunner lock could not be acquired, because it appears as if "
"some\n"
"process on some other host may have acquired it.  We can't test for stale\n"
"locks across host boundaries, so you'll have to do this manually.  Or, if "
"you\n"
"know the lock is stale, re-run mailmanctl with the -s flag.\n"
"\n"
"Lock file: %(LOCKFILE)s\n"
"Lock host: %(status)s\n"
"\n"
"Exiting."
msgstr ""

#: bin/mailmanctl:279 cron/mailpasswds:119
msgid "Site list is missing: %(sitelistname)s"
msgstr ""

#: bin/mailmanctl:304
msgid "Run this program as root or as the %(name)s user, or use -u."
msgstr ""

#: bin/mailmanctl:335
msgid "No command given."
msgstr ""

#: bin/mailmanctl:338
msgid "Bad command: %(command)s"
msgstr ""

#: bin/mailmanctl:343
msgid "Warning!  You may encounter permission problems."
msgstr ""

#: bin/mailmanctl:352
msgid "Shutting down Mailman's master qrunner"
msgstr ""

#: bin/mailmanctl:359
msgid "Restarting Mailman's master qrunner"
msgstr ""

#: bin/mailmanctl:363
msgid "Re-opening all log files"
msgstr ""

#: bin/mailmanctl:399
msgid "Starting Mailman's master qrunner."
msgstr ""

#: bin/mmsitepass:19
msgid ""
"Set the site password, prompting from the terminal.\n"
"\n"
"The site password can be used in most if not all places that the list\n"
"administrator's password can be used, which in turn can be used in most "
"places\n"
"that a list users password can be used.\n"
"\n"
"Usage: %(PROGRAM)s [options] [password]\n"
"\n"
"Options:\n"
"\n"
"    -c/--listcreator\n"
"        Set the list creator password instead of the site password.  The "
"list\n"
"        creator is authorized to create and remove lists, but does not have\n"
"        the total power of the site administrator.\n"
"\n"
"    -h/--help\n"
"        Print this help message and exit.\n"
"\n"
"If password is not given on the command line, it will be prompted for.\n"
msgstr ""

#: bin/mmsitepass:73
msgid "site"
msgstr ""

#: bin/mmsitepass:80
msgid "list creator"
msgstr ""

#: bin/mmsitepass:86
msgid "New %(pwdesc)s password: "
msgstr ""

#: bin/mmsitepass:87
msgid "Again to confirm password: "
msgstr ""

#: bin/mmsitepass:89
msgid "Passwords do not match; no changes made."
msgstr ""

#: bin/mmsitepass:92
msgid "Interrupted..."
msgstr ""

#: bin/mmsitepass:98
msgid "Password changed."
msgstr ""

#: bin/mmsitepass:100
msgid "Password change failed."
msgstr ""

#: bin/msgfmt.py:5
msgid ""
"Generate binary message catalog from textual translation description.\n"
"\n"
"This program converts a textual Uniforum-style message catalog (.po file) "
"into\n"
"a binary GNU catalog (.mo file).  This is essentially the same function as "
"the\n"
"GNU msgfmt program, however, it is a simpler implementation.\n"
"\n"
"Usage: msgfmt.py [OPTIONS] filename.po\n"
"\n"
"Options:\n"
"    -o file\n"
"    --output-file=file\n"
"        Specify the output file to write to.  If omitted, output will go to "
"a\n"
"        file named filename.mo (based off the input file name).\n"
"\n"
"    -h\n"
"    --help\n"
"        Print this message and exit.\n"
"\n"
"    -V\n"
"    --version\n"
"        Display version information and exit.\n"
msgstr ""

#: bin/msgfmt.py:49
msgid "Add a non-fuzzy translation to the dictionary."
msgstr ""

#: bin/msgfmt.py:57
msgid "Return the generated output."
msgstr ""

#: bin/newlist:19
msgid ""
"Create a new, unpopulated mailing list.\n"
"\n"
"Usage: %(PROGRAM)s [options] [listname [listadmin-addr [admin-password]]]\n"
"\n"
"Options:\n"
"\n"
"    -l language\n"
"    --language=language\n"
"        Make the list's preferred language `language', which must be a two\n"
"        letter language code.\n"
"\n"
"    -u urlhost\n"
"    --urlhost=urlhost\n"
"        Gives the list's web interface host name.\n"
"\n"
"    -e emailhost\n"
"    --emailhost=emailhost\n"
"        Gives the list's email domain name.\n"
"\n"
"    -q/--quiet\n"
"        Normally the administrator is notified by email (after a prompt) "
"that\n"
"        their list has been created.  This option suppresses the prompt and\n"
"        notification.\n"
"\n"
"    -h/--help\n"
"        Print this help text and exit.\n"
"\n"
"You can specify as many of the arguments as you want on the command line:\n"
"you will be prompted for the missing ones.\n"
"\n"
"Every Mailman list has two parameters which define the default host name "
"for\n"
"outgoing email, and the default URL for all web interfaces.  When you\n"
"configured Mailman, certain defaults were calculated, but if you are "
"running\n"
"multiple virtual Mailman sites, then the defaults may not be appropriate "
"for\n"
"the list you are creating.\n"
"\n"
"You also specify the domain to create your new list in by typing the "
"command\n"
"like so:\n"
"\n"
"    newlist --urlhost=www.mydom.ain mylist\n"
"\n"
"where `www.mydom.ain' should be the base hostname for the URL to this "
"virtual\n"
"hosts's lists.  E.g. with this setting people will view the general list\n"
"overviews at http://www.mydom.ain/mailman/listinfo.  Also, www.mydom.ain\n"
"should be a key in the VIRTUAL_HOSTS mapping in mm_cfg.py/Defaults.py if\n"
"the email hostname to be automatically determined.\n"
"\n"
"If you want the email hostname to be different from the one looked up by "
"the\n"
"VIRTUAL_HOSTS or if urlhost is not registered in VIRTUAL_HOSTS, you can "
"specify\n"
"`emailhost' like so:\n"
"\n"
"    newlist --urlhost=www.mydom.ain --emailhost=mydom.ain mylist\n"
"\n"
"where `mydom.ain' is the mail domain name. If you don't specify emailhost "
"but\n"
"urlhost is not in the virtual host list, then mm_cfg.DEFAULT_EMAIL_HOST "
"will\n"
"be used for the email interface.\n"
"\n"
"For backward compatibility, you can also specify the domain to create your\n"
"new list in by spelling the listname like so:\n"
"\n"
"    mylist@www.mydom.ain\n"
"\n"
"where www.mydom.ain is used for `urlhost' but it will also be used for\n"
"`emailhost' if it is not found in the virtual host table. Note that\n"
"'--urlhost' and '--emailhost' have precedence to this notation.\n"
"\n"
"If you spell the list name as just `mylist', then the email hostname will "
"be\n"
"taken from DEFAULT_EMAIL_HOST and the url will be taken from DEFAULT_URL "
"(as\n"
"defined in your Defaults.py file or overridden by settings in mm_cfg.py).\n"
"\n"
"Note that listnames are forced to lowercase.\n"
msgstr ""

#: bin/newlist:150
msgid "Unknown language: %(lang)s"
msgstr ""

#: bin/newlist:155
msgid "Enter the name of the list: "
msgstr ""

#: bin/newlist:176
msgid "Enter the email of the person running the list: "
msgstr ""

#: bin/newlist:181
msgid "Initial %(listname)s password: "
msgstr ""

#: bin/newlist:185
msgid "The list password cannot be empty"
msgstr ""

#: bin/newlist:225
msgid "Hit enter to notify %(listname)s owner..."
msgstr ""

#: bin/qrunner:20
msgid ""
"Run one or more qrunners, once or repeatedly.\n"
"\n"
"Each named runner class is run in round-robin fashion.  In other words, the\n"
"first named runner is run to consume all the files currently in its\n"
"directory.  When that qrunner is done, the next one is run to consume all "
"the\n"
"files in /its/ directory, and so on.  The number of total iterations can be\n"
"given on the command line.\n"
"\n"
"Usage: %(PROGRAM)s [options]\n"
"\n"
"Options:\n"
"\n"
"    -r runner[:slice:range]\n"
"    --runner=runner[:slice:range]\n"
"        Run the named qrunner, which must be one of the strings returned by\n"
"        the -l option.  Optional slice:range if given, is used to assign\n"
"        multiple qrunner processes to a queue.  range is the total number "
"of\n"
"        qrunners for this queue while slice is the number of this qrunner "
"from\n"
"        [0..range).\n"
"\n"
"        If using the slice:range form, you better make sure that each "
"qrunner\n"
"        for the queue is given the same range value.  If slice:runner is "
"not\n"
"        given, then 1:1 is used.\n"
"\n"
"        Multiple -r options may be given, in which case each qrunner will "
"run\n"
"        once in round-robin fashion.  The special runner `All' is shorthand\n"
"        for a qrunner for each listed by the -l option.\n"
"\n"
"    --once\n"
"    -o\n"
"        Run each named qrunner exactly once through its main loop.  "
"Otherwise,\n"
"        each qrunner runs indefinitely, until the process receives a "
"SIGTERM\n"
"        or SIGINT.\n"
"\n"
"    -l/--list\n"
"        Shows the available qrunner names and exit.\n"
"\n"
"    -v/--verbose\n"
"        Spit out more debugging information to the logs/qrunner log file.\n"
"\n"
"    -s/--subproc\n"
"        This should only be used when running qrunner as a subprocess of "
"the\n"
"        mailmanctl startup script.  It changes some of the exit-on-error\n"
"        behavior to work better with that framework.\n"
"\n"
"    -h/--help\n"
"        Print this message and exit.\n"
"\n"
"runner is required unless -l or -h is given, and it must be one of the "
"names\n"
"displayed by the -l switch.\n"
"\n"
"Note also that this script should be started up from mailmanctl as a normal\n"
"operation.  It is only useful for debugging if it is run separately.\n"
msgstr ""

#: bin/qrunner:178
msgid "%(name)s runs the %(runnername)s qrunner"
msgstr ""

#: bin/qrunner:179
msgid "All runs all the above qrunners"
msgstr ""

#: bin/qrunner:215
msgid "No runner name given."
msgstr ""

#: bin/rb-archfix:21
msgid ""
"Reduce disk space usage for Pipermail archives.\n"
"\n"
"Usage: %(PROGRAM)s [options] file ...\n"
"\n"
"Where options are:\n"
"    -h / --help\n"
"        Print this help message and exit.\n"
"\n"
"Only use this to 'fix' archive -article database files that have been "
"written\n"
"with Mailman 2.1.3 or earlier and have html_body attributes in them.  These\n"
"attributes can cause huge amounts of memory bloat and impact performance "
"for\n"
"high activity lists, particularly those where large text postings are made "
"to\n"
"them.\n"
"\n"
"Example:\n"
"\n"
"%% ls -1 archives/private/*/database/*-article | xargs %(PROGRAM)s\n"
"\n"
"You should run `bin/check_perms -f' after running this script.\n"
"\n"
"You will probably want to delete the -article.bak files created by this "
"script\n"
"when you are satisfied with the results.\n"
"\n"
"This script is provided for convenience purposes only.  It isn't supported.\n"
msgstr ""

#: bin/remove_members:20
msgid ""
"Remove members from a list.\n"
"\n"
"Usage:\n"
"    remove_members [options] [listname] [addr1 ...]\n"
"\n"
"Options:\n"
"\n"
"    --file=file\n"
"    -f file\n"
"        Remove member addresses found in the given file.  If file is\n"
"        `-', read stdin.\n"
"\n"
"    --all\n"
"    -a\n"
"        Remove all members of the mailing list.\n"
"        (mutually exclusive with --fromall)\n"
"\n"
"    --fromall\n"
"        Removes the given addresses from all the lists on this system\n"
"        regardless of virtual domains if you have any.  This option cannot "
"be\n"
"        used -a/--all.  Also, you should not specify a listname when using\n"
"        this option.\n"
"\n"
"    --nouserack\n"
"    -n\n"
"        Don't send the user acknowledgements.  If not specified, the list\n"
"        default value is used.\n"
"\n"
"    --noadminack\n"
"    -N\n"
"        Don't send the admin acknowledgements.  If not specified, the list\n"
"        default value is used.\n"
"\n"
"    --help\n"
"    -h\n"
"        Print this help message and exit.\n"
"\n"
"    listname is the name of the mailing list to use.\n"
"\n"
"    addr1 ... are additional addresses to remove.\n"
msgstr ""

#: bin/remove_members:156
msgid "Could not open file for reading: %(filename)s."
msgstr ""

#: bin/remove_members:163
msgid "Error opening list %(listname)s... skipping."
msgstr ""

#: bin/remove_members:173
msgid "No such member: %(addr)s"
msgstr ""

#: bin/remove_members:178
msgid "User `%(addr)s' removed from list: %(listname)s."
msgstr ""

#: bin/reset_pw.py:21
msgid ""
"Reset the passwords for members of a mailing list.\n"
"\n"
"This script resets all the passwords of a mailing list's members.  It can "
"also\n"
"be used to reset the lists of all members of all mailing lists, but it is "
"your\n"
"responsibility to let the users know that their passwords have been "
"changed.\n"
"\n"
"This script is intended to be run as a bin/withlist script, i.e.\n"
"\n"
"% bin/withlist -l -r reset_pw listname [options]\n"
"\n"
"Options:\n"
"    -v / --verbose\n"
"        Print what the script is doing.\n"
msgstr ""

#: bin/reset_pw.py:77
msgid "Changing passwords for list: %(listname)s"
msgstr ""

#: bin/reset_pw.py:83
msgid "New password for member %(member)40s: %(randompw)s"
msgstr ""

#: bin/rmlist:19
msgid ""
"Remove the components of a mailing list with impunity - beware!\n"
"\n"
"This removes (almost) all traces of a mailing list.  By default, the lists\n"
"archives are not removed, which is very handy for retiring old lists.\n"
"\n"
"Usage:\n"
"    rmlist [-a] [-h] listname\n"
"\n"
"Where:\n"
"    --archives\n"
"    -a\n"
"        Remove the list's archives too, or if the list has already been\n"
"        deleted, remove any residual archives.\n"
"\n"
"    --help\n"
"    -h\n"
"        Print this help message and exit.\n"
"\n"
msgstr ""

#: bin/rmlist:72 bin/rmlist:75
msgid "Removing %(msg)s"
msgstr ""

#: bin/rmlist:80
msgid "%(listname)s %(msg)s not found as %(filename)s"
msgstr ""

#: bin/rmlist:104
msgid "No such list (or list already deleted): %(listname)s"
msgstr ""

#: bin/rmlist:106
msgid "No such list: %(listname)s.  Removing its residual archives."
msgstr ""

#: bin/rmlist:110
msgid "Not removing archives.  Reinvoke with -a to remove them."
msgstr ""

#: bin/rmlist:124
msgid "list info"
msgstr ""

#: bin/rmlist:132
msgid "stale lock file"
msgstr ""

#: bin/rmlist:137 bin/rmlist:139
msgid "private archives"
msgstr ""

#: bin/rmlist:141 bin/rmlist:143
msgid "public archives"
msgstr ""

#: bin/show_qfiles:20
msgid ""
"Show the contents of one or more Mailman queue files.\n"
"\n"
"Usage: show_qfiles [options] qfile ...\n"
"\n"
"Options:\n"
"\n"
"    -q / --quiet\n"
"        Don't print `helpful' message delimiters.\n"
"\n"
"    -h / --help\n"
"        Print this text and exit.\n"
"\n"
"Example: show_qfiles qfiles/shunt/*.pck\n"
msgstr ""

#: bin/sync_members:19
msgid ""
"Synchronize a mailing list's membership with a flat file.\n"
"\n"
"This script is useful if you have a Mailman mailing list and a sendmail\n"
":include: style list of addresses (also as is used in Majordomo).  For "
"every\n"
"address in the file that does not appear in the mailing list, the address "
"is\n"
"added.  For every address in the mailing list that does not appear in the\n"
"file, the address is removed.  Other options control what happens when an\n"
"address is added or removed.\n"
"\n"
"Usage: %(PROGRAM)s [options] -f file listname\n"
"\n"
"Where `options' are:\n"
"\n"
"    --no-change\n"
"    -n\n"
"        Don't actually make the changes.  Instead, print out what would be\n"
"        done to the list.\n"
"\n"
"    --welcome-msg[=<yes|no>]\n"
"    -w[=<yes|no>]\n"
"        Sets whether or not to send the newly added members a welcome\n"
"        message, overriding whatever the list's `send_welcome_msg' setting\n"
"        is.  With -w=yes or -w, the welcome message is sent.  With -w=no, "
"no\n"
"        message is sent.\n"
"\n"
"    --goodbye-msg[=<yes|no>]\n"
"    -g[=<yes|no>]\n"
"        Sets whether or not to send the goodbye message to removed members,\n"
"        overriding whatever the list's `send_goodbye_msg' setting is.  With\n"
"        -g=yes or -g, the goodbye message is sent.  With -g=no, no message "
"is\n"
"        sent.\n"
"\n"
"    --digest[=<yes|no>]\n"
"    -d[=<yes|no>]\n"
"        Selects whether to make newly added members receive messages in\n"
"        digests.  With -d=yes or -d, they become digest members.  With -"
"d=no\n"
"        (or if no -d option given) they are added as regular members.\n"
"\n"
"    --notifyadmin[=<yes|no>]\n"
"    -a[=<yes|no>]\n"
"        Specifies whether the admin should be notified for each "
"subscription\n"
"        or unsubscription.  If you're adding a lot of addresses, you\n"
"        definitely want to turn this off!  With -a=yes or -a, the admin is\n"
"        notified.  With -a=no, the admin is not notified.  With no -a "
"option,\n"
"        the default for the list is used.\n"
"\n"
"    --file <filename | ->\n"
"    -f <filename | ->\n"
"        This option is required.  It specifies the flat file to synchronize\n"
"        against.  Email addresses must appear one per line.  If filename is\n"
"        `-' then stdin is used.\n"
"\n"
"    --help\n"
"    -h\n"
"        Print this message.\n"
"\n"
"    listname\n"
"        Required.  This specifies the list to synchronize.\n"
msgstr ""

#: bin/sync_members:115
msgid "Bad choice: %(yesno)s"
msgstr ""

#: bin/sync_members:138
msgid "Dry run mode"
msgstr ""

#: bin/sync_members:159
msgid "Only one -f switch allowed"
msgstr ""

#: bin/sync_members:163
msgid "No argument to -f given"
msgstr ""

#: bin/sync_members:172
msgid "Illegal option: %(opt)s"
msgstr ""

#: bin/sync_members:178
msgid "No listname given"
msgstr ""

#: bin/sync_members:182
msgid "Must have a listname and a filename"
msgstr ""

#: bin/sync_members:191
msgid "Cannot read address file: %(filename)s: %(msg)s"
msgstr ""

#: bin/sync_members:203
msgid "Ignore  :  %(addr)30s"
msgstr ""

#: bin/sync_members:212
msgid "Invalid :  %(addr)30s"
msgstr ""

#: bin/sync_members:215
msgid "You must fix the preceding invalid addresses first."
msgstr ""

#: bin/sync_members:260
msgid "Added  : %(s)s"
msgstr ""

#: bin/sync_members:278
msgid "Removed: %(s)s"
msgstr ""

#: bin/transcheck:18
msgid ""
"\n"
"Check a given Mailman translation, making sure that variables and\n"
"tags referenced in translation are the same variables and tags in\n"
"the original templates and catalog.\n"
"\n"
"Usage:\n"
"\n"
"cd $MAILMAN_DIR\n"
"%(program)s [-q] <lang>\n"
"\n"
"Where <lang> is your country code (e.g. 'it' for Italy) and -q is\n"
"to ask for a brief summary.\n"
msgstr ""

#: bin/transcheck:57
msgid "check a translation comparing with the original string"
msgstr ""

#: bin/transcheck:67
msgid "scan a string from the original file"
msgstr ""

#: bin/transcheck:77
msgid "scan a translated string"
msgstr ""

#: bin/transcheck:90
msgid "check for differences between checked in and checked out"
msgstr ""

#: bin/transcheck:123
msgid "parse a .po file extracting msgids and msgstrs"
msgstr ""

#: bin/transcheck:142
msgid ""
"States table for the finite-states-machine parser:\n"
"            0  idle\n"
"            1  filename-or-comment\n"
"            2  msgid\n"
"            3  msgstr\n"
"            4  end\n"
"        "
msgstr ""

#: bin/transcheck:279
msgid ""
"check a translated template against the original one\n"
"       search also <MM-*> tags if html is not zero"
msgstr ""

#: bin/transcheck:326
msgid "scan the po file comparing msgids with msgstrs"
msgstr ""

#: bin/unshunt:19
msgid ""
"Move a message from the shunt queue to the original queue.\n"
"\n"
"Usage: %(PROGRAM)s [options] [directory]\n"
"\n"
"Where:\n"
"\n"
"    -h / --help\n"
"        Print help and exit.\n"
"\n"
"Optional `directory' specifies a directory to dequeue from other than\n"
"qfiles/shunt.\n"
msgstr ""

#: bin/unshunt:81
msgid ""
"Cannot unshunt message %(filebase)s, skipping:\n"
"%(e)s"
msgstr ""

#: bin/update:19
msgid ""
"Perform all necessary upgrades.\n"
"\n"
"Usage: %(PROGRAM)s [options]\n"
"\n"
"Options:\n"
"    -f/--force\n"
"        Force running the upgrade procedures.  Normally, if the version "
"number\n"
"        of the installed Mailman matches the current version number (or a\n"
"        `downgrade' is detected), nothing will be done.\n"
"\n"
"    -h/--help\n"
"        Print this text and exit.\n"
"\n"
"Use this script to help you update to the latest release of Mailman from\n"
"some previous version.  It knows about versions back to 1.0b4 (?).\n"
msgstr ""

#: bin/update:107
msgid "Fixing language templates: %(listname)s"
msgstr ""

#: bin/update:196 bin/update:698
msgid "WARNING: could not acquire lock for list: %(listname)s"
msgstr ""

#: bin/update:215
msgid "Resetting %(n)s BYBOUNCEs disabled addrs with no bounce info"
msgstr ""

#: bin/update:221
msgid "Updating the held requests database."
msgstr ""

#: bin/update:243
msgid ""
"For some reason, %(mbox_dir)s exists as a file.  This won't work with\n"
"b6, so I'm renaming it to %(mbox_dir)s.tmp and proceeding."
msgstr ""

#: bin/update:255
msgid ""
"\n"
"%(listname)s has both public and private mbox archives.  Since this list\n"
"currently uses private archiving, I'm installing the private mbox archive\n"
"-- %(o_pri_mbox_file)s -- as the active archive, and renaming\n"
"        %(o_pub_mbox_file)s\n"
"to\n"
"        %(o_pub_mbox_file)s.preb6\n"
"\n"
"You can integrate that into the archives if you want by using the 'arch'\n"
"script.\n"
msgstr ""

#: bin/update:270
msgid ""
"%s has both public and private mbox archives.  Since this list\n"
"currently uses public archiving, I'm installing the public mbox file\n"
"archive file (%s) as the active one, and renaming\n"
"        %s\n"
"    to\n"
"        %s.preb6\n"
"\n"
"You can integrate that into the archives if you want by using the 'arch'\n"
"script.\n"
msgstr ""

#: bin/update:287
msgid "- updating old private mbox file"
msgstr ""

#: bin/update:295
msgid ""
"    unknown file in the way, moving\n"
"        %(o_pri_mbox_file)s\n"
"    to\n"
"        %(newname)s"
msgstr ""

#: bin/update:302 bin/update:325
msgid ""
"    looks like you have a really recent CVS installation...\n"
"    you're either one brave soul, or you already ran me"
msgstr ""

#: bin/update:311
msgid "- updating old public mbox file"
msgstr ""

#: bin/update:319
msgid ""
"    unknown file in the way, moving\n"
"        %(o_pub_mbox_file)s\n"
"    to\n"
"        %(newname)s"
msgstr ""

#: bin/update:350
msgid "- This list looks like it might have <= b4 list templates around"
msgstr ""

#: bin/update:358
msgid "- moved %(o_tmpl)s to %(n_tmpl)s"
msgstr ""

#: bin/update:360
msgid "- both %(o_tmpl)s and %(n_tmpl)s exist, leaving untouched"
msgstr ""

#: bin/update:363
msgid "- %(o_tmpl)s doesn't exist, leaving untouched"
msgstr ""

#: bin/update:393
msgid "removing directory %(src)s and everything underneath"
msgstr ""

#: bin/update:396
msgid "removing %(src)s"
msgstr ""

#: bin/update:400
msgid "Warning: couldn't remove %(src)s -- %(rest)s"
msgstr ""

#: bin/update:405
msgid "couldn't remove old file %(pyc)s -- %(rest)s"
msgstr ""

#: bin/update:409
msgid "updating old qfiles"
msgstr ""

#: bin/update:448
msgid "Warning!  Not a directory: %(dirpath)s"
msgstr ""

#: bin/update:517
msgid "message is unparsable: %(filebase)s"
msgstr ""

#: bin/update:531
msgid "Warning!  Deleting empty .pck file: %(pckfile)s"
msgstr ""

#: bin/update:550
msgid "Updating Mailman 2.0 pending_subscriptions.db database"
msgstr ""

#: bin/update:561
msgid "Updating Mailman 2.1.4 pending.pck database"
msgstr ""

#: bin/update:585
msgid "Ignoring bad pended data: %(key)s: %(val)s"
msgstr ""

#: bin/update:601
msgid "WARNING: Ignoring duplicate pending ID: %(id)s."
msgstr ""

#: bin/update:654
msgid "getting rid of old source files"
msgstr ""

#: bin/update:664
msgid "no lists == nothing to do, exiting"
msgstr ""

#: bin/update:671
msgid ""
"fixing all the perms on your old html archives to work with b6\n"
"If your archives are big, this could take a minute or two..."
msgstr ""

#: bin/update:676
msgid "done"
msgstr ""

#: bin/update:678
msgid "Updating mailing list: %(listname)s"
msgstr ""

#: bin/update:681
msgid "Updating Usenet watermarks"
msgstr ""

#: bin/update:686
msgid "- nothing to update here"
msgstr ""

#: bin/update:709
msgid "- usenet watermarks updated and gate_watermarks removed"
msgstr ""

#: bin/update:723
msgid ""
"\n"
"\n"
"NOTE NOTE NOTE NOTE NOTE\n"
"\n"
"    You are upgrading an existing Mailman installation, but I can't tell "
"what\n"
"    version you were previously running.\n"
"\n"
"    If you are upgrading from Mailman 1.0b9 or earlier you will need to\n"
"    manually update your mailing lists.  For each mailing list you need to\n"
"    copy the file templates/options.html lists/<listname>/options.html.\n"
"\n"
"    However, if you have edited this file via the Web interface, you will "
"have\n"
"    to merge your changes into this file, otherwise you will lose your\n"
"    changes.\n"
"\n"
"NOTE NOTE NOTE NOTE NOTE\n"
"\n"
msgstr ""

#: bin/update:780
msgid "No updates are necessary."
msgstr ""

#: bin/update:783
msgid ""
"Downgrade detected, from version %(hexlversion)s to version %(hextversion)s\n"
"This is probably not safe.\n"
"Exiting."
msgstr ""

#: bin/update:788
msgid "Upgrading from version %(hexlversion)s to %(hextversion)s"
msgstr ""

#: bin/update:797
msgid ""
"\n"
"ERROR:\n"
"\n"
"The locks for some lists could not be acquired.  This means that either\n"
"Mailman was still active when you upgraded, or there were stale locks in "
"the\n"
"%(lockdir)s directory.\n"
"\n"
"You must put Mailman into a quiescent state and remove all stale locks, "
"then\n"
"re-run \"make update\" manually.  See the INSTALL and UPGRADE files for "
"details.\n"
msgstr ""

#: bin/version:19
msgid "Print the Mailman version.\n"
msgstr ""

#: bin/version:26
msgid "Using Mailman version:"
msgstr ""

#: bin/withlist:19
msgid ""
"General framework for interacting with a mailing list object.\n"
"\n"
"There are two ways to use this script: interactively or programmatically.\n"
"Using it interactively allows you to play with, examine and modify a "
"MailList\n"
"object from Python's interactive interpreter.  When running interactively, "
"a\n"
"MailList object called `m' will be available in the global namespace.  It "
"also\n"
"loads the class MailList into the global namespace.\n"
"\n"
"Programmatically, you can write a function to operate on a MailList object,\n"
"and this script will take care of the housekeeping (see below for "
"examples).\n"
"In that case, the general usage syntax is:\n"
"\n"
"%% bin/withlist [options] listname [args ...]\n"
"\n"
"Options:\n"
"\n"
"    -l / --lock\n"
"        Lock the list when opening.  Normally the list is opened unlocked\n"
"        (e.g. for read-only operations).  You can always lock the file "
"after\n"
"        the fact by typing `m.Lock()'\n"
"\n"
"        Note that if you use this option, you should explicitly call m.Save"
"()\n"
"        before exiting, since the interpreter's clean up procedure will not\n"
"        automatically save changes to the MailList object (but it will "
"unlock\n"
"        the list).\n"
"\n"
"    -i / --interactive\n"
"        Leaves you at an interactive prompt after all other processing is\n"
"        complete.  This is the default unless the -r option is given.\n"
"\n"
"    --run [module.]callable\n"
"    -r [module.]callable\n"
"        This can be used to run a script with the opened MailList object.\n"
"        This works by attempting to import `module' (which must be in the\n"
"        directory containing withlist, or already be accessible on your\n"
"        sys.path), and then calling `callable' from the module.  callable "
"can\n"
"        be a class or function; it is called with the MailList object as "
"the\n"
"        first argument.  If additional args are given on the command line,\n"
"        they are passed as subsequent positional args to the callable.\n"
"\n"
"        Note that `module.' is optional; if it is omitted then a module "
"with\n"
"        the name `callable' will be imported.\n"
"\n"
"        The global variable `r' will be set to the results of this call.\n"
"\n"
"    --all / -a\n"
"        This option only works with the -r option.  Use this if you want to\n"
"        execute the script on all mailing lists.  When you use -a you "
"should\n"
"        not include a listname argument on the command line.  The variable "
"`r'\n"
"        will be a list of all the results.\n"
"\n"
"    --quiet / -q\n"
"        Suppress all status messages.\n"
"\n"
"    --help / -h\n"
"        Print this message and exit\n"
"\n"
"\n"
"Here's an example of how to use the -r option.  Say you have a file in the\n"
"Mailman installation directory called `listaddr.py', with the following\n"
"two functions:\n"
"\n"
"def listaddr(mlist):\n"
"    print mlist.GetListEmail()\n"
"\n"
"def requestaddr(mlist):\n"
"    print mlist.GetRequestEmail()\n"
"\n"
"Now, from the command line you can print the list's posting address by "
"running\n"
"the following from the command line:\n"
"\n"
"%% bin/withlist -r listaddr mylist\n"
"Loading list: mylist (unlocked)\n"
"Importing listaddr ...\n"
"Running listaddr.listaddr() ...\n"
"mylist@myhost.com\n"
"\n"
"And you can print the list's request address by running:\n"
"\n"
"%% bin/withlist -r listaddr.requestaddr mylist\n"
"Loading list: mylist (unlocked)\n"
"Importing listaddr ...\n"
"Running listaddr.requestaddr() ...\n"
"mylist-request@myhost.com\n"
"\n"
"As another example, say you wanted to change the password for a particular\n"
"user on a particular list.  You could put the following function in a file\n"
"called `changepw.py':\n"
"\n"
"from Mailman.Errors import NotAMemberError\n"
"\n"
"def changepw(mlist, addr, newpasswd):\n"
"    try:\n"
"        mlist.setMemberPassword(addr, newpasswd)\n"
"        mlist.Save()\n"
"    except NotAMemberError:\n"
"        print 'No address matched:', addr\n"
"\n"
"and run this from the command line:\n"
" %% bin/withlist -l -r changepw mylist somebody@somewhere.org foobar\n"
msgstr ""

#: bin/withlist:163
msgid ""
"Unlock a locked list, but do not implicitly Save() it.\n"
"\n"
"    This does not get run if the interpreter exits because of a signal, or "
"if\n"
"    os._exit() is called.  It will get called if an exception occurs "
"though.\n"
"    "
msgstr ""

#: bin/withlist:174
msgid "Unlocking (but not saving) list: %(listname)s"
msgstr ""

#: bin/withlist:178
msgid "Finalizing"
msgstr ""

#: bin/withlist:187
msgid "Loading list %(listname)s"
msgstr ""

#: bin/withlist:189
msgid "(locked)"
msgstr ""

#: bin/withlist:191
msgid "(unlocked)"
msgstr ""

#: bin/withlist:196
msgid "Unknown list: %(listname)s"
msgstr ""

#: bin/withlist:236
msgid "No list name supplied."
msgstr ""

#: bin/withlist:245
msgid "--all requires --run"
msgstr ""

#: bin/withlist:265
msgid "Importing %(module)s..."
msgstr ""

#: bin/withlist:268
msgid "Running %(module)s.%(callable)s()..."
msgstr ""

#: bin/withlist:289
msgid "The variable `m' is the %(listname)s MailList instance"
msgstr ""

#: cron/bumpdigests:19
msgid ""
"Increment the digest volume number and reset the digest number to one.\n"
"\n"
"Usage: %(PROGRAM)s [options] [listname ...]\n"
"\n"
"Options:\n"
"\n"
"    --help/-h\n"
"        Print this message and exit.\n"
"\n"
"The lists named on the command line are bumped.  If no list names are "
"given,\n"
"all lists are bumped.\n"
msgstr ""

#: cron/checkdbs:19
msgid ""
"Check for pending admin requests and mail the list owners if necessary.\n"
"\n"
"Usage: %(PROGRAM)s [options]\n"
"\n"
"Options:\n"
"\n"
"    -h/--help\n"
"        Print this message and exit.\n"
msgstr ""

#: cron/checkdbs:107
msgid ""
"Notice: %(discarded)d old request(s) automatically expired.\n"
"\n"
msgstr ""

#: cron/checkdbs:120
msgid "%(count)d %(realname)s moderator request(s) waiting"
msgstr ""

#: cron/checkdbs:123
msgid "%(realname)s moderator request check result"
msgstr ""

#: cron/checkdbs:143
msgid "Pending subscriptions:"
msgstr ""

#: cron/checkdbs:154
msgid ""
"\n"
"Pending posts:"
msgstr ""

#: cron/checkdbs:161
msgid ""
"From: %(sender)s on %(date)s\n"
"Subject: %(subject)s\n"
"Cause: %(reason)s"
msgstr ""

#: cron/disabled:19
msgid ""
"Process disabled members, recommended once per day.\n"
"\n"
"This script cruises through every mailing list looking for members whose\n"
"delivery is disabled.  If they have been disabled due to bounces, they will\n"
"receive another notification, or they may be removed if they've received "
"the\n"
"maximum number of notifications.\n"
"\n"
"Use the --byadmin, --byuser, and --unknown flags to also send notifications "
"to\n"
"members whose accounts have been disabled for those reasons.  Use --all to\n"
"send the notification to all disabled members.\n"
"\n"
"Usage: %(PROGRAM)s [options]\n"
"\n"
"Options:\n"
"    -h / --help\n"
"        Print this message and exit.\n"
"\n"
"    -o / --byadmin\n"
"        Also send notifications to any member disabled by the list\n"
"        owner/administrator.\n"
"\n"
"    -m / --byuser\n"
"        Also send notifications to any member disabled by themselves.\n"
"\n"
"    -u / --unknown\n"
"        Also send notifications to any member disabled for unknown reasons\n"
"        (usually a legacy disabled address).\n"
"\n"
"    -b / --notbybounce\n"
"        Don't send notifications to members disabled because of bounces "
"(the\n"
"        default is to notify bounce disabled members).\n"
"\n"
"    -a / --all\n"
"        Send notifications to all disabled members.\n"
"\n"
"    -f / --force\n"
"        Send notifications to disabled members even if they're not due a "
"new\n"
"        notification yet.\n"
"\n"
"    -l listname\n"
"    --listname=listname\n"
"        Process only the given list, otherwise do all lists.\n"
msgstr ""

#: cron/disabled:144
msgid "[disabled by periodic sweep and cull, no message available]"
msgstr ""

#: cron/gate_news:19
msgid ""
"Poll the NNTP servers for messages to be gatewayed to mailing lists.\n"
"\n"
"Usage: gate_news [options]\n"
"\n"
"Where options are\n"
"\n"
"    --help\n"
"    -h\n"
"        Print this text and exit.\n"
"\n"
msgstr ""

#: cron/mailpasswds:19
msgid ""
"Send password reminders for all lists to all users.\n"
"\n"
"This program scans all mailing lists and collects users and their "
"passwords,\n"
"grouped by the list's host_name if mm_cfg.VIRTUAL_HOST_OVERVIEW is true.  "
"Then\n"
"one email message is sent to each unique user (per-virtual host) containing\n"
"the list passwords and options url for the user.  The password reminder "
"comes\n"
"from the mm_cfg.MAILMAN_SITE_LIST, which must exist.\n"
"\n"
"Usage: %(PROGRAM)s [options]\n"
"\n"
"Options:\n"
"    -l listname\n"
"    --listname=listname\n"
"        Send password reminders for the named list only.  If omitted,\n"
"        reminders are sent for all lists.  Multiple -l/--listname options "
"are\n"
"        allowed.\n"
"\n"
"    -h/--help\n"
"        Print this message and exit.\n"
msgstr ""

#: cron/mailpasswds:216
msgid "Password // URL"
msgstr ""

#: cron/mailpasswds:222
msgid "%(host)s mailing list memberships reminder"
msgstr ""

#: cron/nightly_gzip:19
msgid ""
"Re-generate the Pipermail gzip'd archive flat files.\n"
"\n"
"This script should be run nightly from cron.  When run from the command "
"line,\n"
"the following usage is understood:\n"
"\n"
"Usage: %(program)s [-v] [-h] [listnames]\n"
"\n"
"Where:\n"
"    --verbose\n"
"    -v\n"
"        print each file as it's being gzip'd\n"
"\n"
"    --help\n"
"    -h\n"
"        print this message and exit\n"
"\n"
"    listnames\n"
"        Optionally, only compress the .txt files for the named lists.  "
"Without \n"
"        this, all archivable lists are processed.\n"
"\n"
msgstr ""

#: cron/senddigests:19
msgid ""
"Dispatch digests for lists w/pending messages and digest_send_periodic set.\n"
"\n"
"Usage: %(PROGRAM)s [options]\n"
"\n"
"Options:\n"
"    -h / --help\n"
"        Print this message and exit.\n"
"\n"
"    -l listname\n"
"    --listname=listname\n"
"        Send the digest for the given list only, otherwise the digests for "
"all\n"
"        lists are sent out.\n"
msgstr ""