source: non-gtk/mailman/bg/bg.po @ 673

Last change on this file since 673 was 673, checked in by Александър Шопов, 15 years ago

gok: поява на стабилен клон.

File size: 246.2 KB
Line 
1# Bulgarian translation for GNU MailMan 2.1.8
2# Copyright (C) 2004, 2005, 2006 Free Software Foundation, Inc.
3# Alexander Shopov <ash@contact.bg>, 2004, 2005, 2006.
4#
5msgid ""
6msgstr ""
7"Project-Id-Version: GNU MailMan 2.1.8\n"
8"POT-Creation-Date: Thu Mar 23 16:59:29 2006\n"
9"PO-Revision-Date: 2006-05-14 21:03+0300\n"
10"Last-Translator: Alexander Shopov <ash@contact.bg>\n"
11"Language-Team: Bulgarian <dict@fsa-bg.org>\n"
12"MIME-Version: 1.0\n"
13"Content-Type: text/plain; charset=UTF-8\n"
14"Content-Transfer-Encoding: 8bit\n"
15"Generated-By: pygettext.py 1.4\n"
16"Plural-Forms: nplurals=2; plural=n != 1;\n"
17
18#: Mailman/Archiver/HyperArch.py:123
19msgid "size not available"
20msgstr "Рамерът не е наличен"
21
22#: Mailman/Archiver/HyperArch.py:129
23msgid " %(size)i bytes "
24msgstr " %(size)i байта "
25
26#: Mailman/Archiver/HyperArch.py:284 Mailman/Archiver/HyperArch.py:287
27#: Mailman/Archiver/HyperArch.py:415 Mailman/Archiver/HyperArch.py:467
28#: Mailman/Archiver/HyperArch.py:575 Mailman/Archiver/HyperArch.py:1049
29#: Mailman/Archiver/HyperArch.py:1178
30msgid " at "
31msgstr " на "
32
33#: Mailman/Archiver/HyperArch.py:496
34msgid "Previous message:"
35msgstr "Предходно писмо:"
36
37#: Mailman/Archiver/HyperArch.py:518
38msgid "Next message:"
39msgstr "Следващо писмо:"
40
41#: Mailman/Archiver/HyperArch.py:690 Mailman/Archiver/HyperArch.py:726
42msgid "thread"
43msgstr "нишка"
44
45#: Mailman/Archiver/HyperArch.py:691 Mailman/Archiver/HyperArch.py:727
46msgid "subject"
47msgstr "тема"
48
49#: Mailman/Archiver/HyperArch.py:692 Mailman/Archiver/HyperArch.py:728
50msgid "author"
51msgstr "автор"
52
53#: Mailman/Archiver/HyperArch.py:693 Mailman/Archiver/HyperArch.py:729
54msgid "date"
55msgstr "дата"
56
57#: Mailman/Archiver/HyperArch.py:765
58msgid "<P>Currently, there are no archives. </P>"
59msgstr "<P>В момента няма архиви. </P>"
60
61#: Mailman/Archiver/HyperArch.py:803
62msgid "Gzip'd Text%(sz)s"
63msgstr "Текст, компресиран с gzip - %(sz)s"
64
65#: Mailman/Archiver/HyperArch.py:808
66msgid "Text%(sz)s"
67msgstr "Текст - %(sz)s"
68
69#: Mailman/Archiver/HyperArch.py:898
70#, fuzzy
71msgid "figuring article archives\n"
72msgstr "обработват се архивите на статиите\n"
73
74#: Mailman/Archiver/HyperArch.py:908
75msgid "April"
76msgstr "Април"
77
78#: Mailman/Archiver/HyperArch.py:908
79msgid "February"
80msgstr "Февруари"
81
82#: Mailman/Archiver/HyperArch.py:908
83msgid "January"
84msgstr "Януари"
85
86#: Mailman/Archiver/HyperArch.py:908
87msgid "March"
88msgstr "Март"
89
90#: Mailman/Archiver/HyperArch.py:909
91msgid "August"
92msgstr "Август"
93
94#: Mailman/Archiver/HyperArch.py:909
95msgid "July"
96msgstr "Юли"
97
98#: Mailman/Archiver/HyperArch.py:909
99msgid "June"
100msgstr "Юни"
101
102#: Mailman/Archiver/HyperArch.py:909 Mailman/i18n.py:103
103msgid "May"
104msgstr "Май"
105
106#: Mailman/Archiver/HyperArch.py:910
107msgid "December"
108msgstr "Декември"
109
110#: Mailman/Archiver/HyperArch.py:910
111msgid "November"
112msgstr "Ноември"
113
114#: Mailman/Archiver/HyperArch.py:910
115msgid "October"
116msgstr "Октомври"
117
118#: Mailman/Archiver/HyperArch.py:910
119msgid "September"
120msgstr "Септември"
121
122#: Mailman/Archiver/HyperArch.py:918
123msgid "First"
124msgstr "Първо"
125
126#: Mailman/Archiver/HyperArch.py:918
127msgid "Fourth"
128msgstr "Четвърто"
129
130#: Mailman/Archiver/HyperArch.py:918
131msgid "Second"
132msgstr "Второ"
133
134#: Mailman/Archiver/HyperArch.py:918
135msgid "Third"
136msgstr "Трето"
137
138#: Mailman/Archiver/HyperArch.py:920
139msgid "%(ord)s quarter %(year)i"
140msgstr "%(ord)s тримесечие %(year)i"
141
142#: Mailman/Archiver/HyperArch.py:927
143msgid "%(month)s %(year)i"
144msgstr "%(month)s %(year)i"
145
146#: Mailman/Archiver/HyperArch.py:932
147msgid "The Week Of Monday %(day)i %(month)s %(year)i"
148msgstr "Седмицата започваща с понеделник, %(day)i %(month)s %(year)i"
149
150#: Mailman/Archiver/HyperArch.py:936
151msgid "%(day)i %(month)s %(year)i"
152msgstr "%(day)i %(month)s %(year)i"
153
154#: Mailman/Archiver/HyperArch.py:1036
155msgid "Computing threaded index\n"
156msgstr "В момента се генерира индекса по нишки\n"
157
158#: Mailman/Archiver/HyperArch.py:1301
159msgid "Updating HTML for article %(seq)s"
160msgstr "В момента се обновява кода с HTML за статията %(seq)s"
161
162#: Mailman/Archiver/HyperArch.py:1308
163msgid "article file %(filename)s is missing!"
164msgstr "файлът за статията - %(filename)s липсва!"
165
166#: Mailman/Archiver/pipermail.py:179 Mailman/Archiver/pipermail.py:180
167msgid "No subject"
168msgstr "Без тема"
169
170#: Mailman/Archiver/pipermail.py:287
171msgid "Creating archive directory "
172msgstr "В момента се създава директорията за архивите"
173
174#: Mailman/Archiver/pipermail.py:299
175msgid "Reloading pickled archive state"
176msgstr "В момента се презарежда състоянието на архивите"
177
178#: Mailman/Archiver/pipermail.py:326
179msgid "Pickling archive state into "
180msgstr "Състоянието на архивите се записва в "
181
182#: Mailman/Archiver/pipermail.py:437
183msgid "Updating index files for archive [%(archive)s]"
184msgstr "В момента се обновяват файловете с индекси за архива [%(archive)s]"
185
186#: Mailman/Archiver/pipermail.py:470
187msgid "  Thread"
188msgstr "  Нишка"
189
190#: Mailman/Archiver/pipermail.py:577
191msgid "#%(counter)05d %(msgid)s"
192msgstr "#%(counter)05d %(msgid)s"
193
194#: Mailman/Bouncer.py:44
195msgid "due to excessive bounces"
196msgstr ""
197
198#: Mailman/Bouncer.py:45
199msgid "by yourself"
200msgstr ""
201
202#: Mailman/Bouncer.py:46
203msgid "by the list administrator"
204msgstr ""
205
206#: Mailman/Bouncer.py:47 Mailman/Bouncer.py:247
207#: Mailman/Commands/cmd_set.py:182
208msgid "for unknown reasons"
209msgstr "поради неясни причини"
210
211#: Mailman/Bouncer.py:194
212msgid "disabled"
213msgstr ""
214
215#: Mailman/Bouncer.py:199
216msgid "Bounce action notification"
217msgstr ""
218
219#: Mailman/Bouncer.py:254
220msgid " The last bounce received from you was dated %(date)s"
221msgstr ""
222
223#: Mailman/Bouncer.py:279 Mailman/Deliverer.py:145
224#: Mailman/Handlers/Acknowledge.py:44 Mailman/Handlers/CookHeaders.py:285
225#: Mailman/Handlers/Hold.py:209 Mailman/Handlers/ToDigest.py:235
226#: Mailman/ListAdmin.py:223
227msgid "(no subject)"
228msgstr "(без тема)"
229
230#: Mailman/Bouncer.py:283
231msgid "[No bounce details are available]"
232msgstr ""
233
234#: Mailman/Cgi/Auth.py:46
235msgid "Moderator"
236msgstr ""
237
238#: Mailman/Cgi/Auth.py:48
239msgid "Administrator"
240msgstr "Ръководител"
241
242#: Mailman/Cgi/admin.py:75 Mailman/Cgi/admindb.py:90 Mailman/Cgi/confirm.py:62
243#: Mailman/Cgi/edithtml.py:70 Mailman/Cgi/listinfo.py:51
244#: Mailman/Cgi/options.py:78 Mailman/Cgi/private.py:108
245#: Mailman/Cgi/rmlist.py:64 Mailman/Cgi/roster.py:57
246#: Mailman/Cgi/subscribe.py:61
247msgid "No such list <em>%(safelistname)s</em>"
248msgstr "Няма такъв списък - <em>%(safelistname)s</em>"
249
250#: Mailman/Cgi/admin.py:90 Mailman/Cgi/admindb.py:106
251#: Mailman/Cgi/edithtml.py:88 Mailman/Cgi/private.py:133
252msgid "Authorization failed."
253msgstr "Неуспешно упълномощаване."
254
255#: Mailman/Cgi/admin.py:180
256msgid ""
257"You have turned off delivery of both digest and\n"
258"                non-digest messages.  This is an incompatible state of\n"
259"                affairs.  You must turn on either digest delivery or\n"
260"                non-digest delivery or your mailing list will basically be\n"
261"                unusable."
262msgstr ""
263"Изключили сте както режима на резюмета, така и\n"
264"                нормалното получаване на поща.  Това положение\n"
265"                е некоректно - трябва да позволите поне единия\n"
266"                начин на пращане на съобщения - на резюмета или\n"
267"                не.  В противен случай пощенският Ви списък ще\n"
268"                бъде практически неизползваем."
269
270#: Mailman/Cgi/admin.py:184 Mailman/Cgi/admin.py:190 Mailman/Cgi/admin.py:195
271#: Mailman/Cgi/admin.py:1437 Mailman/Gui/GUIBase.py:191
272msgid "Warning: "
273msgstr "Предупреждение:"
274
275#: Mailman/Cgi/admin.py:188
276msgid ""
277"You have digest members, but digests are turned\n"
278"                off. Those people will not receive mail."
279msgstr ""
280"Има хора, които са се абонирали за спиъка и които\n"
281"                използват режима на резюмета, а Вие сте го\n"
282"                изключили.  Посочените хора няма да получават поща."
283
284#: Mailman/Cgi/admin.py:193
285msgid ""
286"You have regular list members but non-digestified mail is\n"
287"                turned off.  They will receive mail until you fix this\n"
288"                problem."
289msgstr ""
290"Има хора, които са се абонирали за списъка и които не\n"
291"                използват режима на резюмета, а за наличен Вие сте дали\n"
292"                само режима на резюмета.  Посочените хора ще получават\n"
293"                поща докато не отстраните този проблем."
294
295#: Mailman/Cgi/admin.py:217
296msgid "%(hostname)s mailing lists - Admin Links"
297msgstr "Пощенските списъци на %(hostname)s - връзки за ръководители"
298
299#: Mailman/Cgi/admin.py:247 Mailman/Cgi/listinfo.py:100
300msgid "Welcome!"
301msgstr "Здравейте!"
302
303#: Mailman/Cgi/admin.py:250 Mailman/Cgi/listinfo.py:103
304msgid "Mailman"
305msgstr "Mailman"
306
307#: Mailman/Cgi/admin.py:254
308msgid ""
309"<p>There currently are no publicly-advertised %(mailmanlink)s\n"
310"            mailing lists on %(hostname)s."
311msgstr ""
312"<p>В момента на %(hostname)s няма никакви публично оповестени\n"
313"             пощенски списъци работещи с %(mailmanlink)s ."
314
315#: Mailman/Cgi/admin.py:260
316msgid ""
317"<p>Below is the collection of publicly-advertised\n"
318"            %(mailmanlink)s mailing lists on %(hostname)s.  Click on a list\n"
319"            name to visit the configuration pages for that list."
320msgstr ""
321
322#: Mailman/Cgi/admin.py:267
323msgid "right "
324msgstr "отдясно"
325
326#: Mailman/Cgi/admin.py:269
327msgid ""
328"To visit the administrators configuration page for an\n"
329"        unadvertised list, open a URL similar to this one, but with a '/' "
330"and\n"
331"        the %(extra)slist name appended.  If you have the proper authority,\n"
332"        you can also <a href=\"%(creatorurl)s\">create a new mailing list</"
333"a>.\n"
334"\n"
335"        <p>General list information can be found at "
336msgstr ""
337
338#: Mailman/Cgi/admin.py:276
339msgid "the mailing list overview page"
340msgstr ""
341
342#: Mailman/Cgi/admin.py:278
343msgid "<p>(Send questions and comments to "
344msgstr "<p>(Пращайте въпроси и коментари на "
345
346#: Mailman/Cgi/admin.py:288 Mailman/Cgi/listinfo.py:135 cron/mailpasswds:216
347msgid "List"
348msgstr "Списък"
349
350#: Mailman/Cgi/admin.py:289 Mailman/Cgi/admin.py:555
351#: Mailman/Cgi/listinfo.py:136
352msgid "Description"
353msgstr "Описание"
354
355#: Mailman/Cgi/admin.py:295 Mailman/Cgi/listinfo.py:142 bin/list_lists:116
356msgid "[no description available]"
357msgstr "[липсва описание]"
358
359#: Mailman/Cgi/admin.py:328
360msgid "No valid variable name found."
361msgstr "Не е намерено валидно име на променлива."
362
363#: Mailman/Cgi/admin.py:338
364msgid ""
365"%(realname)s Mailing list Configuration Help\n"
366"    <br><em>%(varname)s</em> Option"
367msgstr ""
368
369#: Mailman/Cgi/admin.py:345
370msgid "Mailman %(varname)s List Option Help"
371msgstr ""
372
373#: Mailman/Cgi/admin.py:363
374msgid ""
375"<em><strong>Warning:</strong> changing this option here\n"
376"    could cause other screens to be out-of-sync.  Be sure to reload any "
377"other\n"
378"    pages that are displaying this option for this mailing list.  You can "
379"also\n"
380"    "
381msgstr ""
382
383#: Mailman/Cgi/admin.py:374
384msgid "return to the %(categoryname)s options page."
385msgstr ""
386
387#: Mailman/Cgi/admin.py:389
388msgid "%(realname)s Administration (%(label)s)"
389msgstr ""
390
391#: Mailman/Cgi/admin.py:390
392msgid "%(realname)s mailing list administration<br>%(label)s Section"
393msgstr ""
394
395#: Mailman/Cgi/admin.py:406
396msgid "Configuration Categories"
397msgstr ""
398
399#: Mailman/Cgi/admin.py:407
400msgid "Other Administrative Activities"
401msgstr ""
402
403#: Mailman/Cgi/admin.py:411
404msgid "Tend to pending moderator requests"
405msgstr ""
406
407#: Mailman/Cgi/admin.py:413
408msgid "Go to the general list information page"
409msgstr ""
410
411#: Mailman/Cgi/admin.py:415
412msgid "Edit the public HTML pages and text files"
413msgstr ""
414
415#: Mailman/Cgi/admin.py:417
416msgid "Go to list archives"
417msgstr "Отиване при архивите на списъците"
418
419#: Mailman/Cgi/admin.py:423
420msgid "Delete this mailing list"
421msgstr "Изтриване на този пощенски списък"
422
423#: Mailman/Cgi/admin.py:424
424msgid " (requires confirmation)<br>&nbsp;<br>"
425msgstr " (изисква потвърждение)<br>&nbsp;<br>"
426
427#: Mailman/Cgi/admin.py:430
428msgid "Logout"
429msgstr "Изход"
430
431#: Mailman/Cgi/admin.py:474
432msgid "Emergency moderation of all list traffic is enabled"
433msgstr ""
434
435#: Mailman/Cgi/admin.py:485
436msgid ""
437"Make your changes in the following section, then submit them\n"
438"        using the <em>Submit Your Changes</em> button below."
439msgstr ""
440
441#: Mailman/Cgi/admin.py:503
442msgid "Additional Member Tasks"
443msgstr ""
444
445#: Mailman/Cgi/admin.py:509
446msgid ""
447"<li>Set everyone's moderation bit, including\n"
448"            those members not currently visible"
449msgstr ""
450
451#: Mailman/Cgi/admin.py:513
452msgid "Off"
453msgstr ""
454
455#: Mailman/Cgi/admin.py:513
456msgid "On"
457msgstr ""
458
459#: Mailman/Cgi/admin.py:515
460msgid "Set"
461msgstr ""
462
463#: Mailman/Cgi/admin.py:556
464msgid "Value"
465msgstr ""
466
467#: Mailman/Cgi/admin.py:610
468msgid ""
469"Badly formed options entry:\n"
470" %(record)s"
471msgstr ""
472
473#: Mailman/Cgi/admin.py:668
474msgid "<em>Enter the text below, or...</em><br>"
475msgstr ""
476
477#: Mailman/Cgi/admin.py:670
478msgid "<br><em>...specify a file to upload</em><br>"
479msgstr ""
480
481#: Mailman/Cgi/admin.py:696 Mailman/Cgi/admin.py:699
482msgid "Topic %(i)d"
483msgstr ""
484
485#: Mailman/Cgi/admin.py:700 Mailman/Cgi/admin.py:750
486msgid "Delete"
487msgstr "Изтрване"
488
489#: Mailman/Cgi/admin.py:701
490msgid "Topic name:"
491msgstr "Име на темата:"
492
493#: Mailman/Cgi/admin.py:703
494msgid "Regexp:"
495msgstr "Регулярен израз:"
496
497#: Mailman/Cgi/admin.py:706 Mailman/Cgi/options.py:1029
498msgid "Description:"
499msgstr "Описание:"
500
501#: Mailman/Cgi/admin.py:710 Mailman/Cgi/admin.py:768
502msgid "Add new item..."
503msgstr "Добавяне на нов елемент..."
504
505#: Mailman/Cgi/admin.py:712 Mailman/Cgi/admin.py:770
506msgid "...before this one."
507msgstr "...преди този."
508
509#: Mailman/Cgi/admin.py:713 Mailman/Cgi/admin.py:771
510msgid "...after this one."
511msgstr "...след този."
512
513#: Mailman/Cgi/admin.py:746 Mailman/Cgi/admin.py:749
514msgid "Spam Filter Rule %(i)d"
515msgstr ""
516
517#: Mailman/Cgi/admin.py:751
518msgid "Spam Filter Regexp:"
519msgstr ""
520
521#: Mailman/Cgi/admin.py:762 Mailman/Cgi/admindb.py:302
522#: Mailman/Cgi/admindb.py:361 Mailman/Cgi/admindb.py:404
523#: Mailman/Cgi/admindb.py:638
524msgid "Defer"
525msgstr ""
526
527#: Mailman/Cgi/admin.py:762 Mailman/Cgi/admindb.py:304
528#: Mailman/Cgi/admindb.py:363 Mailman/Cgi/admindb.py:404
529#: Mailman/Cgi/admindb.py:638 Mailman/Gui/ContentFilter.py:37
530#: Mailman/Gui/Privacy.py:216 Mailman/Gui/Privacy.py:290
531msgid "Reject"
532msgstr ""
533
534#: Mailman/Cgi/admin.py:762 Mailman/Gui/Privacy.py:216
535#: Mailman/Gui/Privacy.py:290
536msgid "Hold"
537msgstr ""
538
539#: Mailman/Cgi/admin.py:763 Mailman/Cgi/admindb.py:305
540#: Mailman/Cgi/admindb.py:364 Mailman/Cgi/admindb.py:404
541#: Mailman/Cgi/admindb.py:638 Mailman/Gui/ContentFilter.py:37
542#: Mailman/Gui/Privacy.py:216 Mailman/Gui/Privacy.py:290
543msgid "Discard"
544msgstr ""
545
546#: Mailman/Cgi/admin.py:763 Mailman/Cgi/admindb.py:404
547#: Mailman/Gui/Privacy.py:290
548msgid "Accept"
549msgstr ""
550
551#: Mailman/Cgi/admin.py:766 Mailman/Cgi/admindb.py:644
552msgid "Action:"
553msgstr "Действие:"
554
555#: Mailman/Cgi/admin.py:778
556msgid "Move rule up"
557msgstr "Преместване на правилото нагоре"
558
559#: Mailman/Cgi/admin.py:779
560msgid "Move rule down"
561msgstr "Преместване на правилото надолу"
562
563#: Mailman/Cgi/admin.py:812
564msgid "<br>(Edit <b>%(varname)s</b>)"
565msgstr "<br>(Редактиране на <b>%(varname)s</b>)"
566
567#: Mailman/Cgi/admin.py:814
568msgid "<br>(Details for <b>%(varname)s</b>)"
569msgstr ""
570
571#: Mailman/Cgi/admin.py:821
572msgid ""
573"<br><em><strong>Note:</strong>\n"
574"        setting this value performs an immediate action but does not modify\n"
575"        permanent state.</em>"
576msgstr ""
577
578#: Mailman/Cgi/admin.py:835
579msgid "Mass Subscriptions"
580msgstr "Масово абониране"
581
582#: Mailman/Cgi/admin.py:842
583msgid "Mass Removals"
584msgstr "Масово прекратяване на абонамента"
585
586#: Mailman/Cgi/admin.py:849
587msgid "Membership List"
588msgstr ""
589
590#: Mailman/Cgi/admin.py:856
591msgid "(help)"
592msgstr "(помощ)"
593
594#: Mailman/Cgi/admin.py:857
595msgid "Find member %(link)s:"
596msgstr "Търсене на абонат %(link)s:"
597
598#: Mailman/Cgi/admin.py:860
599msgid "Search..."
600msgstr "Търсене..."
601
602#: Mailman/Cgi/admin.py:877
603msgid "Bad regular expression: "
604msgstr "Неправилен регулярен израз: "
605
606#: Mailman/Cgi/admin.py:933
607msgid "%(allcnt)s members total, %(membercnt)s shown"
608msgstr "Общо %(allcnt)s абонати, показани са %(membercnt)s"
609
610#: Mailman/Cgi/admin.py:936
611msgid "%(allcnt)s members total"
612msgstr "общо %(allcnt)s абонати"
613
614#: Mailman/Cgi/admin.py:959
615msgid "unsub"
616msgstr "прекр. абон."
617
618#: Mailman/Cgi/admin.py:960
619msgid "member address<br>member name"
620msgstr ""
621
622#: Mailman/Cgi/admin.py:961
623msgid "hide"
624msgstr "скриване"
625
626#: Mailman/Cgi/admin.py:961
627msgid "mod"
628msgstr ""
629
630#: Mailman/Cgi/admin.py:962
631msgid "nomail<br>[reason]"
632msgstr ""
633
634#: Mailman/Cgi/admin.py:963
635msgid "ack"
636msgstr ""
637
638#: Mailman/Cgi/admin.py:963
639msgid "not metoo"
640msgstr ""
641
642#: Mailman/Cgi/admin.py:964
643msgid "nodupes"
644msgstr ""
645
646#: Mailman/Cgi/admin.py:965
647msgid "digest"
648msgstr ""
649
650#: Mailman/Cgi/admin.py:965
651msgid "plain"
652msgstr ""
653
654#: Mailman/Cgi/admin.py:966
655msgid "language"
656msgstr ""
657
658#: Mailman/Cgi/admin.py:977
659msgid "?"
660msgstr ""
661
662#: Mailman/Cgi/admin.py:978
663msgid "U"
664msgstr ""
665
666#: Mailman/Cgi/admin.py:979
667msgid "A"
668msgstr ""
669
670#: Mailman/Cgi/admin.py:980
671msgid "B"
672msgstr ""
673
674#: Mailman/Cgi/admin.py:1051
675msgid "<b>unsub</b> -- Click on this to unsubscribe the member."
676msgstr ""
677
678#: Mailman/Cgi/admin.py:1053
679msgid ""
680"<b>mod</b> -- The user's personal moderation flag.  If this is\n"
681"        set, postings from them will be moderated, otherwise they will be\n"
682"        approved."
683msgstr ""
684
685#: Mailman/Cgi/admin.py:1057
686msgid ""
687"<b>hide</b> -- Is the member's address concealed on\n"
688"        the list of subscribers?"
689msgstr ""
690
691#: Mailman/Cgi/admin.py:1059
692msgid ""
693"<b>nomail</b> -- Is delivery to the member disabled?  If so, an\n"
694"        abbreviation will be given describing the reason for the disabled\n"
695"        delivery:\n"
696"            <ul><li><b>U</b> -- Delivery was disabled by the user via their\n"
697"                    personal options page.\n"
698"                <li><b>A</b> -- Delivery was disabled by the list\n"
699"                    administrators.\n"
700"                <li><b>B</b> -- Delivery was disabled by the system due to\n"
701"                    excessive bouncing from the member's address.\n"
702"                <li><b>?</b> -- The reason for disabled delivery isn't "
703"known.\n"
704"                    This is the case for all memberships which were "
705"disabled\n"
706"                    in older versions of Mailman.\n"
707"            </ul>"
708msgstr ""
709
710#: Mailman/Cgi/admin.py:1074
711msgid ""
712"<b>ack</b> -- Does the member get acknowledgements of their\n"
713"        posts?"
714msgstr ""
715
716#: Mailman/Cgi/admin.py:1077
717msgid ""
718"<b>not metoo</b> -- Does the member want to avoid copies of their\n"
719"        own postings?"
720msgstr ""
721
722#: Mailman/Cgi/admin.py:1080
723msgid ""
724"<b>nodupes</b> -- Does the member want to avoid duplicates of the\n"
725"        same message?"
726msgstr ""
727
728#: Mailman/Cgi/admin.py:1083
729msgid ""
730"<b>digest</b> -- Does the member get messages in digests?\n"
731"        (otherwise, individual messages)"
732msgstr ""
733
734#: Mailman/Cgi/admin.py:1086
735msgid ""
736"<b>plain</b> -- If getting digests, does the member get plain\n"
737"        text digests?  (otherwise, MIME)"
738msgstr ""
739
740#: Mailman/Cgi/admin.py:1088
741msgid "<b>language</b> -- Language preferred by the user"
742msgstr ""
743
744#: Mailman/Cgi/admin.py:1102
745msgid "Click here to hide the legend for this table."
746msgstr ""
747
748#: Mailman/Cgi/admin.py:1106
749msgid "Click here to include the legend for this table."
750msgstr ""
751
752#: Mailman/Cgi/admin.py:1113
753msgid ""
754"<p><em>To view more members, click on the appropriate\n"
755"        range listed below:</em>"
756msgstr ""
757
758#: Mailman/Cgi/admin.py:1122
759msgid "from %(start)s to %(end)s"
760msgstr ""
761
762#: Mailman/Cgi/admin.py:1135
763msgid "Subscribe these users now or invite them?"
764msgstr ""
765
766#: Mailman/Cgi/admin.py:1137
767msgid "Invite"
768msgstr ""
769
770#: Mailman/Cgi/admin.py:1137 Mailman/Cgi/listinfo.py:178
771msgid "Subscribe"
772msgstr ""
773
774#: Mailman/Cgi/admin.py:1143
775msgid "Send welcome messages to new subscribees?"
776msgstr ""
777
778#: Mailman/Cgi/admin.py:1145 Mailman/Cgi/admin.py:1154
779#: Mailman/Cgi/admin.py:1187 Mailman/Cgi/admin.py:1195
780#: Mailman/Cgi/confirm.py:290 Mailman/Cgi/create.py:341
781#: Mailman/Cgi/create.py:376 Mailman/Cgi/create.py:414
782#: Mailman/Cgi/rmlist.py:228 Mailman/Gui/Archive.py:33
783#: Mailman/Gui/Autoresponse.py:54 Mailman/Gui/Autoresponse.py:62
784#: Mailman/Gui/Autoresponse.py:71 Mailman/Gui/Bounce.py:77
785#: Mailman/Gui/Bounce.py:120 Mailman/Gui/Bounce.py:146
786#: Mailman/Gui/Bounce.py:155 Mailman/Gui/ContentFilter.py:74
787#: Mailman/Gui/ContentFilter.py:116 Mailman/Gui/ContentFilter.py:120
788#: Mailman/Gui/Digest.py:46 Mailman/Gui/Digest.py:62 Mailman/Gui/Digest.py:84
789#: Mailman/Gui/Digest.py:89 Mailman/Gui/General.py:153
790#: Mailman/Gui/General.py:159 Mailman/Gui/General.py:237
791#: Mailman/Gui/General.py:264 Mailman/Gui/General.py:291
792#: Mailman/Gui/General.py:302 Mailman/Gui/General.py:305
793#: Mailman/Gui/General.py:315 Mailman/Gui/General.py:320
794#: Mailman/Gui/General.py:326 Mailman/Gui/General.py:346
795#: Mailman/Gui/General.py:374 Mailman/Gui/General.py:397
796#: Mailman/Gui/NonDigest.py:44 Mailman/Gui/NonDigest.py:52
797#: Mailman/Gui/NonDigest.py:139 Mailman/Gui/Privacy.py:110
798#: Mailman/Gui/Privacy.py:116 Mailman/Gui/Privacy.py:149
799#: Mailman/Gui/Privacy.py:197 Mailman/Gui/Privacy.py:305
800#: Mailman/Gui/Privacy.py:324 Mailman/Gui/Usenet.py:52
801#: Mailman/Gui/Usenet.py:56 Mailman/Gui/Usenet.py:93 Mailman/Gui/Usenet.py:105
802msgid "No"
803msgstr "Не"
804
805#: Mailman/Cgi/admin.py:1145 Mailman/Cgi/admin.py:1154
806#: Mailman/Cgi/admin.py:1187 Mailman/Cgi/admin.py:1195
807#: Mailman/Cgi/confirm.py:290 Mailman/Cgi/create.py:341
808#: Mailman/Cgi/create.py:376 Mailman/Cgi/create.py:414
809#: Mailman/Cgi/rmlist.py:228 Mailman/Gui/Archive.py:33
810#: Mailman/Gui/Autoresponse.py:54 Mailman/Gui/Autoresponse.py:62
811#: Mailman/Gui/Bounce.py:77 Mailman/Gui/Bounce.py:120
812#: Mailman/Gui/Bounce.py:146 Mailman/Gui/Bounce.py:155
813#: Mailman/Gui/ContentFilter.py:74 Mailman/Gui/ContentFilter.py:116
814#: Mailman/Gui/ContentFilter.py:120 Mailman/Gui/Digest.py:46
815#: Mailman/Gui/Digest.py:62 Mailman/Gui/Digest.py:84 Mailman/Gui/Digest.py:89
816#: Mailman/Gui/General.py:153 Mailman/Gui/General.py:159
817#: Mailman/Gui/General.py:237 Mailman/Gui/General.py:264
818#: Mailman/Gui/General.py:291 Mailman/Gui/General.py:302
819#: Mailman/Gui/General.py:305 Mailman/Gui/General.py:315
820#: Mailman/Gui/General.py:320 Mailman/Gui/General.py:326
821#: Mailman/Gui/General.py:346 Mailman/Gui/General.py:374
822#: Mailman/Gui/General.py:397 Mailman/Gui/NonDigest.py:44
823#: Mailman/Gui/NonDigest.py:52 Mailman/Gui/NonDigest.py:139
824#: Mailman/Gui/Privacy.py:110 Mailman/Gui/Privacy.py:116
825#: Mailman/Gui/Privacy.py:149 Mailman/Gui/Privacy.py:197
826#: Mailman/Gui/Privacy.py:305 Mailman/Gui/Privacy.py:324
827#: Mailman/Gui/Usenet.py:52 Mailman/Gui/Usenet.py:56 Mailman/Gui/Usenet.py:93
828#: Mailman/Gui/Usenet.py:105
829msgid "Yes"
830msgstr "Да"
831
832#: Mailman/Cgi/admin.py:1152
833msgid "Send notifications of new subscriptions to the list owner?"
834msgstr ""
835
836#: Mailman/Cgi/admin.py:1160 Mailman/Cgi/admin.py:1201
837msgid "Enter one address per line below..."
838msgstr ""
839
840#: Mailman/Cgi/admin.py:1165 Mailman/Cgi/admin.py:1206
841msgid "...or specify a file to upload:"
842msgstr ""
843
844#: Mailman/Cgi/admin.py:1170
845msgid ""
846"Below, enter additional text to be added to the\n"
847"    top of your invitation or the subscription notification.  Include at "
848"least\n"
849"    one blank line at the end..."
850msgstr ""
851
852#: Mailman/Cgi/admin.py:1185
853msgid "Send unsubscription acknowledgement to the user?"
854msgstr ""
855
856#: Mailman/Cgi/admin.py:1193
857msgid "Send notifications to the list owner?"
858msgstr ""
859
860#: Mailman/Cgi/admin.py:1215
861msgid "Change list ownership passwords"
862msgstr ""
863
864#: Mailman/Cgi/admin.py:1218
865msgid ""
866"The <em>list administrators</em> are the people who have ultimate control "
867"over\n"
868"all parameters of this mailing list.  They are able to change any list\n"
869"configuration variable available through these administration web pages.\n"
870"\n"
871"<p>The <em>list moderators</em> have more limited permissions; they are not\n"
872"able to change any list configuration variable, but they are allowed to "
873"tend\n"
874"to pending administration requests, including approving or rejecting held\n"
875"subscription requests, and disposing of held postings.  Of course, the\n"
876"<em>list administrators</em> can also tend to pending requests.\n"
877"\n"
878"<p>In order to split the list ownership duties into administrators and\n"
879"moderators, you must set a separate moderator password in the fields below,\n"
880"and also provide the email addresses of the list moderators in the\n"
881"<a href=\"%(adminurl)s/general\">general options section</a>."
882msgstr ""
883
884#: Mailman/Cgi/admin.py:1237
885msgid "Enter new administrator password:"
886msgstr ""
887
888#: Mailman/Cgi/admin.py:1239
889msgid "Confirm administrator password:"
890msgstr ""
891
892#: Mailman/Cgi/admin.py:1244
893msgid "Enter new moderator password:"
894msgstr ""
895
896#: Mailman/Cgi/admin.py:1246
897msgid "Confirm moderator password:"
898msgstr ""
899
900#: Mailman/Cgi/admin.py:1256
901msgid "Submit Your Changes"
902msgstr ""
903
904#: Mailman/Cgi/admin.py:1279
905msgid "Moderator passwords did not match"
906msgstr ""
907
908#: Mailman/Cgi/admin.py:1289
909msgid "Administrator passwords did not match"
910msgstr ""
911
912#: Mailman/Cgi/admin.py:1338
913msgid "Already a member"
914msgstr "Вече е абониран"
915
916#: Mailman/Cgi/admin.py:1341
917msgid "&lt;blank line&gt;"
918msgstr "&lt;празен ред&gt;"
919
920#: Mailman/Cgi/admin.py:1342 Mailman/Cgi/admin.py:1345
921msgid "Bad/Invalid email address"
922msgstr "Неправилен адрес на е-поща"
923
924#: Mailman/Cgi/admin.py:1348
925msgid "Hostile address (illegal characters)"
926msgstr "Лош адрес (съдържа забранени символи)"
927
928#: Mailman/Cgi/admin.py:1351
929msgid "Banned address (matched %(pattern)s)"
930msgstr ""
931
932#: Mailman/Cgi/admin.py:1357
933msgid "Successfully invited:"
934msgstr "Успешно поканен:"
935
936#: Mailman/Cgi/admin.py:1359
937msgid "Successfully subscribed:"
938msgstr "Успешно абониран:"
939
940#: Mailman/Cgi/admin.py:1364
941msgid "Error inviting:"
942msgstr "Грешка при поканването на:"
943
944#: Mailman/Cgi/admin.py:1366
945msgid "Error subscribing:"
946msgstr "Грешка при абонирането на:"
947
948#: Mailman/Cgi/admin.py:1395
949msgid "Successfully Unsubscribed:"
950msgstr "Успешно прекратен абонамент:"
951
952#: Mailman/Cgi/admin.py:1400
953msgid "Cannot unsubscribe non-members:"
954msgstr "Не може да се прекрати абонамента, на тези, които не са абонирани:"
955
956#: Mailman/Cgi/admin.py:1412
957msgid "Bad moderation flag value"
958msgstr ""
959
960#: Mailman/Cgi/admin.py:1433
961msgid "Not subscribed"
962msgstr "Не е абониран"
963
964#: Mailman/Cgi/admin.py:1436
965msgid "Ignoring changes to deleted member: %(user)s"
966msgstr ""
967
968#: Mailman/Cgi/admin.py:1476
969msgid "Successfully Removed:"
970msgstr "Успешно прекратен абонамент на:"
971
972#: Mailman/Cgi/admin.py:1480
973msgid "Error Unsubscribing:"
974msgstr "Грешка при прекратяването на абонамента на:"
975
976#: Mailman/Cgi/admindb.py:160 Mailman/Cgi/admindb.py:168
977msgid "%(realname)s Administrative Database"
978msgstr ""
979
980#: Mailman/Cgi/admindb.py:163
981msgid "%(realname)s Administrative Database Results"
982msgstr ""
983
984#: Mailman/Cgi/admindb.py:171
985msgid "There are no pending requests."
986msgstr ""
987
988#: Mailman/Cgi/admindb.py:174
989msgid "Click here to reload this page."
990msgstr ""
991
992#: Mailman/Cgi/admindb.py:185
993msgid "Detailed instructions for the administrative database"
994msgstr ""
995
996#: Mailman/Cgi/admindb.py:189
997msgid "Administrative requests for mailing list:"
998msgstr ""
999
1000#: Mailman/Cgi/admindb.py:192 Mailman/Cgi/admindb.py:247
1001msgid "Submit All Data"
1002msgstr "Подаване на всички данни"
1003
1004#: Mailman/Cgi/admindb.py:197 Mailman/Cgi/admindb.py:245
1005msgid "Discard all messages marked <em>Defer</em>"
1006msgstr ""
1007
1008#: Mailman/Cgi/admindb.py:211
1009msgid "all of %(esender)s's held messages."
1010msgstr ""
1011
1012#: Mailman/Cgi/admindb.py:216
1013msgid "a single held message."
1014msgstr ""
1015
1016#: Mailman/Cgi/admindb.py:221
1017msgid "all held messages."
1018msgstr ""
1019
1020#: Mailman/Cgi/admindb.py:262
1021msgid "Mailman Administrative Database Error"
1022msgstr ""
1023
1024#: Mailman/Cgi/admindb.py:267
1025msgid "list of available mailing lists."
1026msgstr ""
1027
1028#: Mailman/Cgi/admindb.py:268
1029msgid "You must specify a list name.  Here is the %(link)s"
1030msgstr ""
1031
1032#: Mailman/Cgi/admindb.py:281
1033msgid "Subscription Requests"
1034msgstr ""
1035
1036#: Mailman/Cgi/admindb.py:283
1037msgid "Address/name"
1038msgstr ""
1039
1040#: Mailman/Cgi/admindb.py:284 Mailman/Cgi/admindb.py:335
1041msgid "Your decision"
1042msgstr ""
1043
1044#: Mailman/Cgi/admindb.py:285 Mailman/Cgi/admindb.py:336
1045msgid "Reason for refusal"
1046msgstr ""
1047
1048#: Mailman/Cgi/admindb.py:303 Mailman/Cgi/admindb.py:362
1049#: Mailman/Cgi/admindb.py:638
1050msgid "Approve"
1051msgstr ""
1052
1053#: Mailman/Cgi/admindb.py:313
1054msgid "Permanently ban from this list"
1055msgstr ""
1056
1057#: Mailman/Cgi/admindb.py:334
1058msgid "User address/name"
1059msgstr ""
1060
1061#: Mailman/Cgi/admindb.py:374
1062msgid "Unsubscription Requests"
1063msgstr ""
1064
1065#: Mailman/Cgi/admindb.py:397 Mailman/Cgi/admindb.py:621
1066msgid "From:"
1067msgstr ""
1068
1069#: Mailman/Cgi/admindb.py:400
1070msgid "Action to take on all these held messages:"
1071msgstr ""
1072
1073#: Mailman/Cgi/admindb.py:412
1074msgid "Preserve messages for the site administrator"
1075msgstr ""
1076
1077#: Mailman/Cgi/admindb.py:418
1078msgid "Forward messages (individually) to:"
1079msgstr ""
1080
1081#: Mailman/Cgi/admindb.py:436
1082msgid "Clear this member's <em>moderate</em> flag"
1083msgstr ""
1084
1085#: Mailman/Cgi/admindb.py:440
1086msgid "<em>The sender is now a member of this list</em>"
1087msgstr ""
1088
1089#: Mailman/Cgi/admindb.py:449
1090msgid "Add <b>%(esender)s</b> to one of these sender filters:"
1091msgstr ""
1092
1093#: Mailman/Cgi/admindb.py:454
1094msgid "Accepts"
1095msgstr ""
1096
1097#: Mailman/Cgi/admindb.py:454
1098msgid "Discards"
1099msgstr ""
1100
1101#: Mailman/Cgi/admindb.py:454
1102msgid "Holds"
1103msgstr ""
1104
1105#: Mailman/Cgi/admindb.py:454
1106msgid "Rejects"
1107msgstr ""
1108
1109#: Mailman/Cgi/admindb.py:463
1110msgid ""
1111"Ban <b>%(esender)s</b> from ever subscribing to this\n"
1112"                    mailing list"
1113msgstr ""
1114
1115#: Mailman/Cgi/admindb.py:468
1116msgid ""
1117"Click on the message number to view the individual\n"
1118"            message, or you can "
1119msgstr ""
1120
1121#: Mailman/Cgi/admindb.py:470
1122msgid "view all messages from %(esender)s"
1123msgstr ""
1124
1125#: Mailman/Cgi/admindb.py:492 Mailman/Cgi/admindb.py:624
1126msgid "Subject:"
1127msgstr ""
1128
1129#: Mailman/Cgi/admindb.py:495
1130msgid " bytes"
1131msgstr ""
1132
1133#: Mailman/Cgi/admindb.py:495
1134msgid "Size:"
1135msgstr ""
1136
1137#: Mailman/Cgi/admindb.py:499 Mailman/Handlers/Scrubber.py:207
1138#: Mailman/Handlers/Scrubber.py:304 Mailman/Handlers/Scrubber.py:305
1139msgid "not available"
1140msgstr ""
1141
1142#: Mailman/Cgi/admindb.py:500 Mailman/Cgi/admindb.py:627
1143msgid "Reason:"
1144msgstr ""
1145
1146#: Mailman/Cgi/admindb.py:504 Mailman/Cgi/admindb.py:631
1147msgid "Received:"
1148msgstr ""
1149
1150#: Mailman/Cgi/admindb.py:562
1151msgid "Posting Held for Approval"
1152msgstr ""
1153
1154#: Mailman/Cgi/admindb.py:564
1155msgid " (%(count)d of %(total)d)"
1156msgstr ""
1157
1158#: Mailman/Cgi/admindb.py:575
1159msgid "<em>Message with id #%(id)d was lost."
1160msgstr ""
1161
1162#: Mailman/Cgi/admindb.py:584
1163msgid "<em>Message with id #%(id)d is corrupted."
1164msgstr ""
1165
1166#: Mailman/Cgi/admindb.py:648
1167msgid "Preserve message for site administrator"
1168msgstr ""
1169
1170#: Mailman/Cgi/admindb.py:652
1171msgid "Additionally, forward this message to: "
1172msgstr ""
1173
1174#: Mailman/Cgi/admindb.py:656
1175msgid "[No explanation given]"
1176msgstr ""
1177
1178#: Mailman/Cgi/admindb.py:658
1179msgid "If you reject this post,<br>please explain (optional):"
1180msgstr ""
1181
1182#: Mailman/Cgi/admindb.py:664
1183msgid "Message Headers:"
1184msgstr ""
1185
1186#: Mailman/Cgi/admindb.py:669
1187msgid "Message Excerpt:"
1188msgstr ""
1189
1190#: Mailman/Cgi/admindb.py:709 Mailman/Deliverer.py:143
1191msgid "No reason given"
1192msgstr ""
1193
1194#: Mailman/Cgi/admindb.py:771 Mailman/ListAdmin.py:296
1195#: Mailman/ListAdmin.py:414
1196msgid "[No reason given]"
1197msgstr ""
1198
1199#: Mailman/Cgi/admindb.py:803
1200msgid "Database Updated..."
1201msgstr ""
1202
1203#: Mailman/Cgi/admindb.py:806
1204msgid " is already a member"
1205msgstr ""
1206
1207#: Mailman/Cgi/admindb.py:809
1208msgid "%(addr)s is banned (matched: %(patt)s)"
1209msgstr ""
1210
1211#: Mailman/Cgi/confirm.py:76
1212msgid "Confirmation string was empty."
1213msgstr ""
1214
1215#: Mailman/Cgi/confirm.py:96
1216msgid ""
1217"<b>Invalid confirmation string:</b>\n"
1218"    %(safecookie)s.\n"
1219"\n"
1220"    <p>Note that confirmation strings expire approximately\n"
1221"    %(days)s days after the initial subscription request.  If your\n"
1222"    confirmation has expired, please try to re-submit your subscription.\n"
1223"    Otherwise, <a href=\"%(confirmurl)s\">re-enter</a> your confirmation\n"
1224"    string."
1225msgstr ""
1226
1227#: Mailman/Cgi/confirm.py:129
1228msgid ""
1229"The address requesting unsubscription is not\n"
1230"                a member of the mailing list.  Perhaps you have already "
1231"been\n"
1232"                unsubscribed, e.g. by the list administrator?"
1233msgstr ""
1234
1235#: Mailman/Cgi/confirm.py:145
1236msgid ""
1237"The address requesting to be changed has\n"
1238"                    been subsequently unsubscribed.  This request has been\n"
1239"                    cancelled."
1240msgstr ""
1241
1242#: Mailman/Cgi/confirm.py:165
1243msgid "System error, bad content: %(content)s"
1244msgstr ""
1245
1246#: Mailman/Cgi/confirm.py:175
1247msgid "Bad confirmation string"
1248msgstr ""
1249
1250#: Mailman/Cgi/confirm.py:194
1251msgid "Enter confirmation cookie"
1252msgstr ""
1253
1254#: Mailman/Cgi/confirm.py:207
1255msgid ""
1256"Please enter the confirmation string\n"
1257"    (i.e. <em>cookie</em>) that you received in your email message, in the "
1258"box\n"
1259"    below.  Then hit the <em>Submit</em> button to proceed to the next\n"
1260"    confirmation step."
1261msgstr ""
1262
1263#: Mailman/Cgi/confirm.py:212
1264msgid "Confirmation string:"
1265msgstr ""
1266
1267#: Mailman/Cgi/confirm.py:214
1268msgid "Submit"
1269msgstr ""
1270
1271#: Mailman/Cgi/confirm.py:231
1272msgid "Confirm subscription request"
1273msgstr ""
1274
1275#: Mailman/Cgi/confirm.py:246
1276msgid ""
1277"Your confirmation is required in order to complete the\n"
1278"    subscription request to the mailing list <em>%(listname)s</em>.  Your\n"
1279"    subscription settings are shown below; make any necessary changes and "
1280"hit\n"
1281"    <em>Subscribe</em> to complete the confirmation process.  Once you've\n"
1282"    confirmed your subscription request, you will be shown your account\n"
1283"    options page which you can use to further customize your membership\n"
1284"    options.\n"
1285"\n"
1286"    <p>Note: your password will be emailed to you once your subscription is\n"
1287"    confirmed.  You can change it by visiting your personal options page.\n"
1288"\n"
1289"    <p>Or hit <em>Cancel my subscription request</em> if you no longer want "
1290"to\n"
1291"    subscribe to this list."
1292msgstr ""
1293
1294#: Mailman/Cgi/confirm.py:261
1295msgid ""
1296"Your confirmation is required in order to continue with\n"
1297"        the subscription request to the mailing list <em>%(listname)s</em>.\n"
1298"        Your subscription settings are shown below; make any necessary "
1299"changes\n"
1300"        and hit <em>Subscribe to list ...</em> to complete the confirmation\n"
1301"        process.  Once you've confirmed your subscription request, the\n"
1302"        moderator must approve or reject your membership request.  You will\n"
1303"        receive notice of their decision.\n"
1304"\n"
1305"        <p>Note: your password will be emailed to you once your "
1306"subscription\n"
1307"        is confirmed.  You can change it by visiting your personal options\n"
1308"        page.\n"
1309"\n"
1310"        <p>Or, if you've changed your mind and do not want to subscribe to\n"
1311"        this mailing list, you can hit <em>Cancel my subscription\n"
1312"        request</em>."
1313msgstr ""
1314
1315#: Mailman/Cgi/confirm.py:279
1316msgid "Your email address:"
1317msgstr ""
1318
1319#: Mailman/Cgi/confirm.py:280
1320msgid "Your real name:"
1321msgstr ""
1322
1323#: Mailman/Cgi/confirm.py:289
1324msgid "Receive digests?"
1325msgstr ""
1326
1327#: Mailman/Cgi/confirm.py:298
1328msgid "Preferred language:"
1329msgstr ""
1330
1331#: Mailman/Cgi/confirm.py:303
1332msgid "Cancel my subscription request"
1333msgstr ""
1334
1335#: Mailman/Cgi/confirm.py:304
1336msgid "Subscribe to list %(listname)s"
1337msgstr ""
1338
1339#: Mailman/Cgi/confirm.py:321
1340msgid "You have canceled your subscription request."
1341msgstr ""
1342
1343#: Mailman/Cgi/confirm.py:359
1344msgid "Awaiting moderator approval"
1345msgstr ""
1346
1347#: Mailman/Cgi/confirm.py:362
1348msgid ""
1349"            You have successfully confirmed your subscription request to "
1350"the\n"
1351"            mailing list %(listname)s, however final approval is required "
1352"from\n"
1353"            the list moderator before you will be subscribed.  Your request\n"
1354"            has been forwarded to the list moderator, and you will be "
1355"notified\n"
1356"            of the moderator's decision."
1357msgstr ""
1358
1359#: Mailman/Cgi/confirm.py:369 Mailman/Cgi/confirm.py:434
1360#: Mailman/Cgi/confirm.py:523 Mailman/Cgi/confirm.py:752
1361msgid ""
1362"Invalid confirmation string.  It is\n"
1363"            possible that you are attempting to confirm a request for an\n"
1364"            address that has already been unsubscribed."
1365msgstr ""
1366
1367#: Mailman/Cgi/confirm.py:373
1368msgid "You are already a member of this mailing list!"
1369msgstr ""
1370
1371#: Mailman/Cgi/confirm.py:376
1372msgid ""
1373"You are currently banned from subscribing to\n"
1374"            this list.  If you think this restriction is erroneous, please\n"
1375"            contact the list owners at %(owneraddr)s."
1376msgstr ""
1377
1378#: Mailman/Cgi/confirm.py:380
1379msgid ""
1380"            You were not invited to this mailing list.  The invitation has\n"
1381"            been discarded, and both list administrators have been\n"
1382"            alerted."
1383msgstr ""
1384
1385#: Mailman/Cgi/confirm.py:390
1386msgid "Subscription request confirmed"
1387msgstr ""
1388
1389#: Mailman/Cgi/confirm.py:394
1390msgid ""
1391"            You have successfully confirmed your subscription request for\n"
1392"            \"%(addr)s\" to the %(listname)s mailing list.  A separate\n"
1393"            confirmation message will be sent to your email address, along\n"
1394"            with your password, and other useful information and links.\n"
1395"\n"
1396"            <p>You can now\n"
1397"            <a href=\"%(optionsurl)s\">proceed to your membership login\n"
1398"            page</a>."
1399msgstr ""
1400
1401#: Mailman/Cgi/confirm.py:412
1402msgid "You have canceled your unsubscription request."
1403msgstr ""
1404
1405#: Mailman/Cgi/confirm.py:440
1406msgid "Unsubscription request confirmed"
1407msgstr ""
1408
1409#: Mailman/Cgi/confirm.py:444
1410msgid ""
1411"            You have successfully unsubscribed from the %(listname)s "
1412"mailing\n"
1413"            list.  You can now <a href=\"%(listinfourl)s\">visit the list's "
1414"main\n"
1415"            information page</a>."
1416msgstr ""
1417
1418#: Mailman/Cgi/confirm.py:455
1419msgid "Confirm unsubscription request"
1420msgstr ""
1421
1422#: Mailman/Cgi/confirm.py:470 Mailman/Cgi/confirm.py:566
1423msgid "<em>Not available</em>"
1424msgstr ""
1425
1426#: Mailman/Cgi/confirm.py:473
1427msgid ""
1428"Your confirmation is required in order to complete the\n"
1429"    unsubscription request from the mailing list <em>%(listname)s</em>.  "
1430"You\n"
1431"    are currently subscribed with\n"
1432"\n"
1433"    <ul><li><b>Real name:</b> %(fullname)s\n"
1434"        <li><b>Email address:</b> %(addr)s\n"
1435"    </ul>\n"
1436"\n"
1437"    Hit the <em>Unsubscribe</em> button below to complete the confirmation\n"
1438"    process.\n"
1439"\n"
1440"    <p>Or hit <em>Cancel and discard</em> to cancel this unsubscription\n"
1441"    request."
1442msgstr ""
1443
1444#: Mailman/Cgi/confirm.py:489 Mailman/Cgi/options.py:746
1445#: Mailman/Cgi/options.py:887 Mailman/Cgi/options.py:897
1446msgid "Unsubscribe"
1447msgstr ""
1448
1449#: Mailman/Cgi/confirm.py:490 Mailman/Cgi/confirm.py:595
1450msgid "Cancel and discard"
1451msgstr ""
1452
1453#: Mailman/Cgi/confirm.py:500
1454msgid "You have canceled your change of address request."
1455msgstr ""
1456
1457#: Mailman/Cgi/confirm.py:529
1458msgid ""
1459"%(newaddr)s is banned from subscribing to the\n"
1460"            %(realname)s list.  If you think this restriction is erroneous,\n"
1461"            please contact the list owners at %(owneraddr)s."
1462msgstr ""
1463
1464#: Mailman/Cgi/confirm.py:535
1465msgid "Change of address request confirmed"
1466msgstr ""
1467
1468#: Mailman/Cgi/confirm.py:539
1469msgid ""
1470"            You have successfully changed your address on the %(listname)s\n"
1471"            mailing list from <b>%(oldaddr)s</b> to <b>%(newaddr)s</b>.  "
1472"You\n"
1473"            can now <a href=\"%(optionsurl)s\">proceed to your membership\n"
1474"            login page</a>."
1475msgstr ""
1476
1477#: Mailman/Cgi/confirm.py:551
1478msgid "Confirm change of address request"
1479msgstr ""
1480
1481#: Mailman/Cgi/confirm.py:570
1482msgid "globally"
1483msgstr ""
1484
1485#: Mailman/Cgi/confirm.py:573
1486msgid ""
1487"Your confirmation is required in order to complete the\n"
1488"    change of address request for the mailing list <em>%(listname)s</em>.  "
1489"You\n"
1490"    are currently subscribed with\n"
1491"\n"
1492"    <ul><li><b>Real name:</b> %(fullname)s\n"
1493"        <li><b>Old email address:</b> %(oldaddr)s\n"
1494"    </ul>\n"
1495"\n"
1496"    and you have requested to %(globallys)s change your email address to\n"
1497"\n"
1498"    <ul><li><b>New email address:</b> %(newaddr)s\n"
1499"    </ul>\n"
1500"\n"
1501"    Hit the <em>Change address</em> button below to complete the "
1502"confirmation\n"
1503"    process.\n"
1504"\n"
1505"    <p>Or hit <em>Cancel and discard</em> to cancel this change of address\n"
1506"    request."
1507msgstr ""
1508
1509#: Mailman/Cgi/confirm.py:594
1510msgid "Change address"
1511msgstr ""
1512
1513#: Mailman/Cgi/confirm.py:603 Mailman/Cgi/confirm.py:717
1514msgid "Continue awaiting approval"
1515msgstr ""
1516
1517#: Mailman/Cgi/confirm.py:611
1518msgid ""
1519"Okay, the list moderator will still have the\n"
1520"    opportunity to approve or reject this message."
1521msgstr ""
1522
1523#: Mailman/Cgi/confirm.py:637
1524msgid "Sender discarded message via web."
1525msgstr ""
1526
1527#: Mailman/Cgi/confirm.py:639
1528msgid ""
1529"The held message with the Subject:\n"
1530"            header <em>%(subject)s</em> could not be found.  The most "
1531"likely\n"
1532"            reason for this is that the list moderator has already approved "
1533"or\n"
1534"            rejected the message.  You were not able to cancel it in\n"
1535"            time."
1536msgstr ""
1537
1538#: Mailman/Cgi/confirm.py:647
1539msgid "Posted message canceled"
1540msgstr ""
1541
1542#: Mailman/Cgi/confirm.py:650
1543msgid ""
1544"            You have successfully canceled the posting of your message with\n"
1545"            the Subject: header <em>%(subject)s</em> to the mailing list\n"
1546"            %(listname)s."
1547msgstr ""
1548
1549#: Mailman/Cgi/confirm.py:661
1550msgid "Cancel held message posting"
1551msgstr ""
1552
1553#: Mailman/Cgi/confirm.py:686
1554msgid ""
1555"The held message you were referred to has\n"
1556"        already been handled by the list administrator."
1557msgstr ""
1558
1559#: Mailman/Cgi/confirm.py:700
1560msgid ""
1561"Your confirmation is required in order to cancel the\n"
1562"    posting of your message to the mailing list <em>%(listname)s</em>:\n"
1563"\n"
1564"    <ul><li><b>Sender:</b> %(sender)s\n"
1565"        <li><b>Subject:</b> %(subject)s\n"
1566"        <li><b>Reason:</b> %(reason)s\n"
1567"    </ul>\n"
1568"\n"
1569"    Hit the <em>Cancel posting</em> button to discard the posting.\n"
1570"\n"
1571"    <p>Or hit the <em>Continue awaiting approval</em> button to continue to\n"
1572"    allow the list moderator to approve or reject the message."
1573msgstr ""
1574
1575#: Mailman/Cgi/confirm.py:716
1576msgid "Cancel posting"
1577msgstr ""
1578
1579#: Mailman/Cgi/confirm.py:728
1580msgid ""
1581"You have canceled the re-enabling of your membership.  If\n"
1582"    we continue to receive bounces from your address, it could be deleted "
1583"from\n"
1584"    this mailing list."
1585msgstr ""
1586
1587#: Mailman/Cgi/confirm.py:758
1588msgid "Membership re-enabled."
1589msgstr ""
1590
1591#: Mailman/Cgi/confirm.py:762
1592msgid ""
1593"            You have successfully re-enabled your membership in the\n"
1594"            %(listname)s mailing list.  You can now <a\n"
1595"            href=\"%(optionsurl)s\">visit your member options page</a>.\n"
1596"            "
1597msgstr ""
1598
1599#: Mailman/Cgi/confirm.py:774
1600msgid "Re-enable mailing list membership"
1601msgstr ""
1602
1603#: Mailman/Cgi/confirm.py:791
1604msgid ""
1605"We're sorry, but you have already been unsubscribed\n"
1606"        from this mailing list.  To re-subscribe, please visit the\n"
1607"        <a href=\"%(listinfourl)s\">list information page</a>."
1608msgstr ""
1609
1610#: Mailman/Cgi/confirm.py:806
1611msgid "<em>not available</em>"
1612msgstr ""
1613
1614#: Mailman/Cgi/confirm.py:810
1615msgid ""
1616"Your membership in the %(realname)s mailing list is\n"
1617"    currently disabled due to excessive bounces.  Your confirmation is\n"
1618"    required in order to re-enable delivery to your address.  We have the\n"
1619"    following information on file:\n"
1620"\n"
1621"    <ul><li><b>Member address:</b> %(member)s\n"
1622"        <li><b>Member name:</b> %(username)s\n"
1623"        <li><b>Last bounce received on:</b> %(date)s\n"
1624"        <li><b>Approximate number of days before you are permanently "
1625"removed\n"
1626"               from this list:</b> %(daysleft)s\n"
1627"    </ul>\n"
1628"\n"
1629"    Hit the <em>Re-enable membership</em> button to resume receiving "
1630"postings\n"
1631"    from the mailing list.  Or hit the <em>Cancel</em> button to defer\n"
1632"    re-enabling your membership.\n"
1633"    "
1634msgstr ""
1635
1636#: Mailman/Cgi/confirm.py:830
1637msgid "Re-enable membership"
1638msgstr ""
1639
1640#: Mailman/Cgi/confirm.py:831
1641msgid "Cancel"
1642msgstr ""
1643
1644#: Mailman/Cgi/create.py:49 Mailman/Cgi/rmlist.py:48
1645msgid "Bad URL specification"
1646msgstr ""
1647
1648#: Mailman/Cgi/create.py:64 Mailman/Cgi/rmlist.py:176
1649msgid "Return to the "
1650msgstr ""
1651
1652#: Mailman/Cgi/create.py:66 Mailman/Cgi/rmlist.py:178
1653msgid "general list overview"
1654msgstr ""
1655
1656#: Mailman/Cgi/create.py:67 Mailman/Cgi/rmlist.py:179
1657msgid "<br>Return to the "
1658msgstr ""
1659
1660#: Mailman/Cgi/create.py:69 Mailman/Cgi/rmlist.py:181
1661msgid "administrative list overview"
1662msgstr ""
1663
1664#: Mailman/Cgi/create.py:104
1665msgid "List name must not include \"@\": %(safelistname)s"
1666msgstr ""
1667
1668#: Mailman/Cgi/create.py:111
1669msgid "List already exists: %(safelistname)s"
1670msgstr ""
1671
1672#: Mailman/Cgi/create.py:115
1673msgid "You forgot to enter the list name"
1674msgstr ""
1675
1676#: Mailman/Cgi/create.py:119
1677msgid "You forgot to specify the list owner"
1678msgstr ""
1679
1680#: Mailman/Cgi/create.py:126
1681msgid ""
1682"Leave the initial password (and confirmation) fields\n"
1683"                blank if you want Mailman to autogenerate the list\n"
1684"                passwords."
1685msgstr ""
1686
1687#: Mailman/Cgi/create.py:135
1688msgid "Initial list passwords do not match"
1689msgstr ""
1690
1691#: Mailman/Cgi/create.py:144
1692msgid "The list password cannot be empty<!-- ignore -->"
1693msgstr ""
1694
1695#: Mailman/Cgi/create.py:156
1696msgid "You are not authorized to create new mailing lists"
1697msgstr ""
1698
1699#: Mailman/Cgi/create.py:164
1700msgid "Unknown virtual host: %(safehostname)s"
1701msgstr ""
1702
1703#: Mailman/Cgi/create.py:195 bin/newlist:202
1704msgid "Bad owner email address: %(s)s"
1705msgstr ""
1706
1707#: Mailman/Cgi/create.py:199 bin/newlist:170 bin/newlist:204
1708msgid "List already exists: %(listname)s"
1709msgstr ""
1710
1711#: Mailman/Cgi/create.py:203 bin/newlist:200
1712msgid "Illegal list name: %(s)s"
1713msgstr ""
1714
1715#: Mailman/Cgi/create.py:208
1716msgid ""
1717"Some unknown error occurred while creating the list.\n"
1718"                Please contact the site administrator for assistance."
1719msgstr ""
1720
1721#: Mailman/Cgi/create.py:245 bin/newlist:245
1722msgid "Your new mailing list: %(listname)s"
1723msgstr ""
1724
1725#: Mailman/Cgi/create.py:254
1726msgid "Mailing list creation results"
1727msgstr ""
1728
1729#: Mailman/Cgi/create.py:260
1730msgid ""
1731"You have successfully created the mailing list\n"
1732"    <b>%(listname)s</b> and notification has been sent to the list owner\n"
1733"    <b>%(owner)s</b>.  You can now:"
1734msgstr ""
1735
1736#: Mailman/Cgi/create.py:264
1737msgid "Visit the list's info page"
1738msgstr ""
1739
1740#: Mailman/Cgi/create.py:265
1741msgid "Visit the list's admin page"
1742msgstr ""
1743
1744#: Mailman/Cgi/create.py:266
1745msgid "Create another list"
1746msgstr ""
1747
1748#: Mailman/Cgi/create.py:284
1749msgid "Create a %(hostname)s Mailing List"
1750msgstr ""
1751
1752#: Mailman/Cgi/create.py:293 Mailman/Cgi/rmlist.py:199
1753#: Mailman/Gui/Bounce.py:187 Mailman/htmlformat.py:339
1754msgid "Error: "
1755msgstr ""
1756
1757#: Mailman/Cgi/create.py:295
1758msgid ""
1759"You can create a new mailing list by entering the\n"
1760"    relevant information into the form below.  The name of the mailing list\n"
1761"    will be used as the primary address for posting messages to the list, "
1762"so\n"
1763"    it should be lowercased.  You will not be able to change this once the\n"
1764"    list is created.\n"
1765"\n"
1766"    <p>You also need to enter the email address of the initial list owner.\n"
1767"    Once the list is created, the list owner will be given notification, "
1768"along\n"
1769"    with the initial list password.  The list owner will then be able to\n"
1770"    modify the password and add or remove additional list owners.\n"
1771"\n"
1772"    <p>If you want Mailman to automatically generate the initial list admin\n"
1773"    password, click on `Yes' in the autogenerate field below, and leave the\n"
1774"    initial list password fields empty.\n"
1775"\n"
1776"    <p>You must have the proper authorization to create new mailing lists.\n"
1777"    Each site should have a <em>list creator's</em> password, which you can\n"
1778"    enter in the field at the bottom.  Note that the site administrator's\n"
1779"    password can also be used for authentication.\n"
1780"    "
1781msgstr ""
1782
1783#: Mailman/Cgi/create.py:321
1784msgid "List Identity"
1785msgstr ""
1786
1787#: Mailman/Cgi/create.py:325
1788msgid "Name of list:"
1789msgstr ""
1790
1791#: Mailman/Cgi/create.py:331
1792msgid "Initial list owner address:"
1793msgstr ""
1794
1795#: Mailman/Cgi/create.py:340
1796msgid "Auto-generate initial list password?"
1797msgstr ""
1798
1799#: Mailman/Cgi/create.py:348
1800msgid "Initial list password:"
1801msgstr ""
1802
1803#: Mailman/Cgi/create.py:354
1804msgid "Confirm initial password:"
1805msgstr ""
1806
1807#: Mailman/Cgi/create.py:369
1808msgid "List Characteristics"
1809msgstr ""
1810
1811#: Mailman/Cgi/create.py:373
1812msgid ""
1813"Should new members be quarantined before they\n"
1814"    are allowed to post unmoderated to this list?  Answer <em>Yes</em> to "
1815"hold\n"
1816"    new member postings for moderator approval by default."
1817msgstr ""
1818
1819#: Mailman/Cgi/create.py:402
1820msgid ""
1821"Initial list of supported languages.  <p>Note that if you do not\n"
1822"        select at least one initial language, the list will use the server\n"
1823"        default language of %(deflang)s"
1824msgstr ""
1825
1826#: Mailman/Cgi/create.py:413
1827msgid "Send \"list created\" email to list owner?"
1828msgstr ""
1829
1830#: Mailman/Cgi/create.py:422
1831msgid "List creator's (authentication) password:"
1832msgstr ""
1833
1834#: Mailman/Cgi/create.py:427
1835msgid "Create List"
1836msgstr ""
1837
1838#: Mailman/Cgi/create.py:428
1839msgid "Clear Form"
1840msgstr ""
1841
1842#: Mailman/Cgi/edithtml.py:45
1843msgid "General list information page"
1844msgstr ""
1845
1846#: Mailman/Cgi/edithtml.py:46
1847msgid "Subscribe results page"
1848msgstr ""
1849
1850#: Mailman/Cgi/edithtml.py:47
1851msgid "User specific options page"
1852msgstr ""
1853
1854#: Mailman/Cgi/edithtml.py:48
1855msgid "Welcome email text file"
1856msgstr ""
1857
1858#: Mailman/Cgi/edithtml.py:60
1859msgid "List name is required."
1860msgstr ""
1861
1862#: Mailman/Cgi/edithtml.py:100
1863msgid "%(realname)s -- Edit html for %(template_info)s"
1864msgstr ""
1865
1866#: Mailman/Cgi/edithtml.py:106
1867msgid "Edit HTML : Error"
1868msgstr ""
1869
1870#: Mailman/Cgi/edithtml.py:107
1871msgid "%(safetemplatename)s: Invalid template"
1872msgstr ""
1873
1874#: Mailman/Cgi/edithtml.py:112 Mailman/Cgi/edithtml.py:113
1875msgid "%(realname)s -- HTML Page Editing"
1876msgstr ""
1877
1878#: Mailman/Cgi/edithtml.py:114
1879msgid "Select page to edit:"
1880msgstr ""
1881
1882#: Mailman/Cgi/edithtml.py:140
1883msgid "View or edit the list configuration information."
1884msgstr ""
1885
1886#: Mailman/Cgi/edithtml.py:148
1887msgid "When you are done making changes..."
1888msgstr ""
1889
1890#: Mailman/Cgi/edithtml.py:149
1891msgid "Submit Changes"
1892msgstr ""
1893
1894#: Mailman/Cgi/edithtml.py:156
1895msgid "Can't have empty html page."
1896msgstr ""
1897
1898#: Mailman/Cgi/edithtml.py:157
1899msgid "HTML Unchanged."
1900msgstr ""
1901
1902#: Mailman/Cgi/edithtml.py:177
1903msgid "HTML successfully updated."
1904msgstr ""
1905
1906#: Mailman/Cgi/listinfo.py:73
1907msgid "%(hostname)s Mailing Lists"
1908msgstr ""
1909
1910#: Mailman/Cgi/listinfo.py:106
1911msgid ""
1912"<p>There currently are no publicly-advertised\n"
1913"            %(mailmanlink)s mailing lists on %(hostname)s."
1914msgstr ""
1915
1916#: Mailman/Cgi/listinfo.py:110
1917msgid ""
1918"<p>Below is a listing of all the public mailing lists on\n"
1919"            %(hostname)s.  Click on a list name to get more information "
1920"about\n"
1921"            the list, or to subscribe, unsubscribe, and change the "
1922"preferences\n"
1923"            on your subscription."
1924msgstr ""
1925
1926#: Mailman/Cgi/listinfo.py:116
1927msgid "right"
1928msgstr ""
1929
1930#: Mailman/Cgi/listinfo.py:119
1931msgid ""
1932" To visit the general information page for an unadvertised list,\n"
1933"        open a URL similar to this one, but with a '/' and the %(adj)s\n"
1934"        list name appended.\n"
1935"        <p>List administrators, you can visit "
1936msgstr ""
1937
1938#: Mailman/Cgi/listinfo.py:124
1939msgid "the list admin overview page"
1940msgstr ""
1941
1942#: Mailman/Cgi/listinfo.py:125
1943msgid ""
1944" to find the management interface for your list.\n"
1945"         <p>If you are having trouble using the lists, please contact "
1946msgstr ""
1947
1948#: Mailman/Cgi/listinfo.py:190
1949msgid "Edit Options"
1950msgstr ""
1951
1952#: Mailman/Cgi/listinfo.py:197 Mailman/Cgi/options.py:853
1953#: Mailman/Cgi/roster.py:109
1954msgid "View this page in"
1955msgstr ""
1956
1957#: Mailman/Cgi/options.py:58 Mailman/Cgi/options.py:75
1958msgid "CGI script error"
1959msgstr ""
1960
1961#: Mailman/Cgi/options.py:61
1962msgid "Invalid options to CGI script."
1963msgstr ""
1964
1965#: Mailman/Cgi/options.py:105
1966msgid "No address given"
1967msgstr ""
1968
1969#: Mailman/Cgi/options.py:117
1970msgid "Illegal Email Address: %(safeuser)s"
1971msgstr ""
1972
1973#: Mailman/Cgi/options.py:124 Mailman/Cgi/options.py:188
1974#: Mailman/Cgi/options.py:210
1975msgid "No such member: %(safeuser)s."
1976msgstr ""
1977
1978#: Mailman/Cgi/options.py:174
1979msgid ""
1980"Your unsubscription request has been\n"
1981"                    forwarded to the list administrator for approval."
1982msgstr ""
1983
1984#: Mailman/Cgi/options.py:179 Mailman/Cgi/options.py:193
1985msgid "The confirmation email has been sent."
1986msgstr ""
1987
1988#: Mailman/Cgi/options.py:204 Mailman/Cgi/options.py:216
1989#: Mailman/Cgi/options.py:271
1990msgid "A reminder of your password has been emailed to you."
1991msgstr ""
1992
1993#: Mailman/Cgi/options.py:245
1994msgid "Authentication failed."
1995msgstr ""
1996
1997#: Mailman/Cgi/options.py:278
1998msgid ""
1999"The list administrator may not view the other\n"
2000"            subscriptions for this user."
2001msgstr ""
2002
2003#: Mailman/Cgi/options.py:279 Mailman/Cgi/options.py:322
2004#: Mailman/Cgi/options.py:442 Mailman/Cgi/options.py:658
2005msgid "Note: "
2006msgstr ""
2007
2008#: Mailman/Cgi/options.py:284
2009msgid "List subscriptions for %(safeuser)s on %(hostname)s"
2010msgstr ""
2011
2012#: Mailman/Cgi/options.py:287
2013msgid ""
2014"Click on a link to visit your options page for the\n"
2015"        requested mailing list."
2016msgstr ""
2017
2018#: Mailman/Cgi/options.py:319
2019msgid ""
2020"The list administrator may not change the names\n"
2021"            or addresses for this user's other subscriptions.  However, the\n"
2022"            subscription for this mailing list has been changed."
2023msgstr ""
2024
2025#: Mailman/Cgi/options.py:342
2026msgid "Addresses did not match!"
2027msgstr ""
2028
2029#: Mailman/Cgi/options.py:347
2030msgid "You are already using that email address"
2031msgstr ""
2032
2033#: Mailman/Cgi/options.py:359
2034msgid ""
2035"The new address you requested %(newaddr)s is already a member of the\n"
2036"%(listname)s mailing list, however you have also requested a global change "
2037"of\n"
2038"address.  Upon confirmation, any other mailing list containing the address\n"
2039"%(safeuser)s will be changed. "
2040msgstr ""
2041
2042#: Mailman/Cgi/options.py:368
2043msgid "The new address is already a member: %(newaddr)s"
2044msgstr ""
2045
2046#: Mailman/Cgi/options.py:374
2047msgid "Addresses may not be blank"
2048msgstr ""
2049
2050#: Mailman/Cgi/options.py:388
2051msgid "A confirmation message has been sent to %(newaddr)s. "
2052msgstr ""
2053
2054#: Mailman/Cgi/options.py:397
2055msgid "Bad email address provided"
2056msgstr ""
2057
2058#: Mailman/Cgi/options.py:399
2059msgid "Illegal email address provided"
2060msgstr ""
2061
2062#: Mailman/Cgi/options.py:401
2063msgid "%(newaddr)s is already a member of the list."
2064msgstr ""
2065
2066#: Mailman/Cgi/options.py:404
2067msgid ""
2068"%(newaddr)s is banned from this list.  If you\n"
2069"                      think this restriction is erroneous, please contact\n"
2070"                      the list owners at %(owneraddr)s."
2071msgstr ""
2072
2073#: Mailman/Cgi/options.py:415
2074msgid "Member name successfully changed. "
2075msgstr ""
2076
2077#: Mailman/Cgi/options.py:426
2078msgid "Passwords may not be blank"
2079msgstr ""
2080
2081#: Mailman/Cgi/options.py:431
2082msgid "Passwords did not match!"
2083msgstr ""
2084
2085#: Mailman/Cgi/options.py:439
2086msgid ""
2087"The list administrator may not change the\n"
2088"            password for this user's other subscriptions.  However, the\n"
2089"            password for this mailing list has been changed."
2090msgstr ""
2091
2092#: Mailman/Cgi/options.py:456 Mailman/Commands/cmd_password.py:83
2093#: Mailman/Commands/cmd_password.py:109
2094msgid "Password successfully changed."
2095msgstr ""
2096
2097#: Mailman/Cgi/options.py:465
2098msgid ""
2099"You must confirm your unsubscription request by turning\n"
2100"                on the checkbox below the <em>Unsubscribe</em> button.  You\n"
2101"                have not been unsubscribed!"
2102msgstr ""
2103
2104#: Mailman/Cgi/options.py:497
2105msgid "Unsubscription results"
2106msgstr ""
2107
2108#: Mailman/Cgi/options.py:501
2109msgid ""
2110"Your unsubscription request has been received and\n"
2111"            forwarded on to the list moderators for approval.  You will\n"
2112"            receive notification once the list moderators have made their\n"
2113"            decision."
2114msgstr ""
2115
2116#: Mailman/Cgi/options.py:506
2117msgid ""
2118"You have been successfully unsubscribed from the\n"
2119"            mailing list %(fqdn_listname)s.  If you were receiving digest\n"
2120"            deliveries you may get one more digest.  If you have any "
2121"questions\n"
2122"            about your unsubscription, please contact the list owners at\n"
2123"            %(owneraddr)s."
2124msgstr ""
2125
2126#: Mailman/Cgi/options.py:655
2127msgid ""
2128"The list administrator may not change the\n"
2129"                options for this user's other subscriptions.  However the\n"
2130"                options for this mailing list subscription has been\n"
2131"                changed."
2132msgstr ""
2133
2134#: Mailman/Cgi/options.py:665
2135msgid ""
2136"The list administrator has disabled digest delivery for\n"
2137"            this list, so your delivery option has not been set.  However "
2138"your\n"
2139"            other options have been set successfully."
2140msgstr ""
2141
2142#: Mailman/Cgi/options.py:669
2143msgid ""
2144"The list administrator has disabled non-digest delivery\n"
2145"            for this list, so your delivery option has not been set.  "
2146"However\n"
2147"            your other options have been set successfully."
2148msgstr ""
2149
2150#: Mailman/Cgi/options.py:673
2151msgid "You have successfully set your options."
2152msgstr ""
2153
2154#: Mailman/Cgi/options.py:676
2155msgid "You may get one last digest."
2156msgstr ""
2157
2158#: Mailman/Cgi/options.py:748
2159msgid "<em>Yes, I really want to unsubscribe</em>"
2160msgstr ""
2161
2162#: Mailman/Cgi/options.py:752
2163msgid "Change My Password"
2164msgstr ""
2165
2166#: Mailman/Cgi/options.py:755
2167msgid "List my other subscriptions"
2168msgstr ""
2169
2170#: Mailman/Cgi/options.py:761
2171msgid "Email My Password To Me"
2172msgstr ""
2173
2174#: Mailman/Cgi/options.py:763
2175msgid "password"
2176msgstr ""
2177
2178#: Mailman/Cgi/options.py:765
2179msgid "Log out"
2180msgstr ""
2181
2182#: Mailman/Cgi/options.py:767
2183msgid "Submit My Changes"
2184msgstr ""
2185
2186#: Mailman/Cgi/options.py:779
2187msgid "days"
2188msgstr ""
2189
2190#: Mailman/Cgi/options.py:781
2191msgid "day"
2192msgstr ""
2193
2194#: Mailman/Cgi/options.py:782
2195msgid "%(days)d %(units)s"
2196msgstr ""
2197
2198#: Mailman/Cgi/options.py:788
2199msgid "Change My Address and Name"
2200msgstr ""
2201
2202#: Mailman/Cgi/options.py:812
2203msgid "<em>No topics defined</em>"
2204msgstr ""
2205
2206#: Mailman/Cgi/options.py:820
2207msgid ""
2208"\n"
2209"You are subscribed to this list with the case-preserved address\n"
2210"<em>%(cpuser)s</em>."
2211msgstr ""
2212
2213#: Mailman/Cgi/options.py:834
2214msgid "%(realname)s list: member options login page"
2215msgstr ""
2216
2217#: Mailman/Cgi/options.py:835
2218msgid "email address and "
2219msgstr ""
2220
2221#: Mailman/Cgi/options.py:838
2222msgid "%(realname)s list: member options for user %(safeuser)s"
2223msgstr ""
2224
2225#: Mailman/Cgi/options.py:863
2226msgid ""
2227"In order to change your membership option, you must\n"
2228"    first log in by giving your %(extra)smembership password in the section\n"
2229"    below.  If you don't remember your membership password, you can have it\n"
2230"    emailed to you by clicking on the button below.  If you just want to\n"
2231"    unsubscribe from this list, click on the <em>Unsubscribe</em> button and "
2232"a\n"
2233"    confirmation message will be sent to you.\n"
2234"\n"
2235"    <p><strong><em>Important:</em></strong> From this point on, you must "
2236"have\n"
2237"    cookies enabled in your browser, otherwise none of your changes will "
2238"take\n"
2239"    effect.\n"
2240"    "
2241msgstr ""
2242
2243#: Mailman/Cgi/options.py:877
2244msgid "Email address:"
2245msgstr ""
2246
2247#: Mailman/Cgi/options.py:881
2248msgid "Password:"
2249msgstr ""
2250
2251#: Mailman/Cgi/options.py:883
2252msgid "Log in"
2253msgstr ""
2254
2255#: Mailman/Cgi/options.py:891
2256msgid ""
2257"By clicking on the <em>Unsubscribe</em> button, a\n"
2258"    confirmation message will be emailed to you.  This message will have a\n"
2259"    link that you should click on to complete the removal process (you can\n"
2260"    also confirm by email; see the instructions in the confirmation\n"
2261"    message)."
2262msgstr ""
2263
2264#: Mailman/Cgi/options.py:899
2265msgid "Password reminder"
2266msgstr ""
2267
2268#: Mailman/Cgi/options.py:903
2269msgid ""
2270"By clicking on the <em>Remind</em> button, your\n"
2271"    password will be emailed to you."
2272msgstr ""
2273
2274#: Mailman/Cgi/options.py:906
2275msgid "Remind"
2276msgstr ""
2277
2278#: Mailman/Cgi/options.py:1006
2279msgid "<missing>"
2280msgstr ""
2281
2282#: Mailman/Cgi/options.py:1017
2283msgid "Requested topic is not valid: %(topicname)s"
2284msgstr ""
2285
2286#: Mailman/Cgi/options.py:1022
2287msgid "Topic filter details"
2288msgstr ""
2289
2290#: Mailman/Cgi/options.py:1025
2291msgid "Name:"
2292msgstr ""
2293
2294#: Mailman/Cgi/options.py:1027
2295msgid "Pattern (as regexp):"
2296msgstr ""
2297
2298#: Mailman/Cgi/private.py:64
2299msgid "Private Archive Error"
2300msgstr ""
2301
2302#: Mailman/Cgi/private.py:65
2303msgid "You must specify a list."
2304msgstr ""
2305
2306#: Mailman/Cgi/private.py:72
2307msgid "Private archive - \"./\" and \"../\" not allowed in URL."
2308msgstr ""
2309
2310#: Mailman/Cgi/private.py:109
2311msgid "Private Archive Error - %(msg)s"
2312msgstr ""
2313
2314#: Mailman/Cgi/private.py:178
2315msgid "Private archive file not found"
2316msgstr ""
2317
2318#: Mailman/Cgi/rmlist.py:81
2319msgid "You're being a sneaky list owner!"
2320msgstr ""
2321
2322#: Mailman/Cgi/rmlist.py:119
2323msgid "You are not authorized to delete this mailing list"
2324msgstr ""
2325
2326#: Mailman/Cgi/rmlist.py:160
2327msgid "Mailing list deletion results"
2328msgstr ""
2329
2330#: Mailman/Cgi/rmlist.py:167
2331msgid ""
2332"You have successfully deleted the mailing list\n"
2333"    <b>%(listname)s</b>."
2334msgstr ""
2335
2336#: Mailman/Cgi/rmlist.py:171
2337msgid ""
2338"There were some problems deleting the mailing list\n"
2339"        <b>%(listname)s</b>.  Contact your site administrator at %(sitelist)"
2340"s\n"
2341"        for details."
2342msgstr ""
2343
2344#: Mailman/Cgi/rmlist.py:188
2345msgid "Permanently remove mailing list <em>%(realname)s</em>"
2346msgstr ""
2347
2348#: Mailman/Cgi/rmlist.py:202
2349msgid ""
2350"This page allows you as the list owner, to permanent\n"
2351"    remove this mailing list from the system.  <strong>This action is not\n"
2352"    undoable</strong> so you should undertake it only if you are absolutely\n"
2353"    sure this mailing list has served its purpose and is no longer "
2354"necessary.\n"
2355"\n"
2356"    <p>Note that no warning will be sent to your list members and after "
2357"this\n"
2358"    action, any subsequent messages sent to the mailing list, or any of its\n"
2359"    administrative addreses will bounce.\n"
2360"\n"
2361"    <p>You also have the option of removing the archives for this mailing "
2362"list\n"
2363"    at this time.  It is almost always recommended that you do\n"
2364"    <strong>not</strong> remove the archives, since they serve as the\n"
2365"    historical record of your mailing list.\n"
2366"\n"
2367"    <p>For your safety, you will be asked to reconfirm the list password.\n"
2368"    "
2369msgstr ""
2370
2371#: Mailman/Cgi/rmlist.py:223
2372msgid "List password:"
2373msgstr ""
2374
2375#: Mailman/Cgi/rmlist.py:227
2376msgid "Also delete archives?"
2377msgstr ""
2378
2379#: Mailman/Cgi/rmlist.py:235
2380msgid "<b>Cancel</b> and return to list administration"
2381msgstr ""
2382
2383#: Mailman/Cgi/rmlist.py:238
2384msgid "Delete this list"
2385msgstr ""
2386
2387#: Mailman/Cgi/roster.py:48 Mailman/Cgi/subscribe.py:50
2388msgid "Invalid options to CGI script"
2389msgstr ""
2390
2391#: Mailman/Cgi/roster.py:97
2392msgid "%(realname)s roster authentication failed."
2393msgstr ""
2394
2395#: Mailman/Cgi/roster.py:125 Mailman/Cgi/roster.py:126
2396#: Mailman/Cgi/subscribe.py:49 Mailman/Cgi/subscribe.py:60
2397msgid "Error"
2398msgstr ""
2399
2400#: Mailman/Cgi/subscribe.py:111
2401msgid "You must supply a valid email address."
2402msgstr ""
2403
2404#: Mailman/Cgi/subscribe.py:123
2405msgid "You may not subscribe a list to itself!"
2406msgstr ""
2407
2408#: Mailman/Cgi/subscribe.py:131
2409msgid "If you supply a password, you must confirm it."
2410msgstr ""
2411
2412#: Mailman/Cgi/subscribe.py:133
2413msgid "Your passwords did not match."
2414msgstr ""
2415
2416#: Mailman/Cgi/subscribe.py:167
2417msgid ""
2418"Your subscription request has been received, and will soon be acted upon.\n"
2419"Depending on the configuration of this mailing list, your subscription "
2420"request\n"
2421"may have to be first confirmed by you via email, or approved by the list\n"
2422"moderator.  If confirmation is required, you will soon get a confirmation\n"
2423"email which contains further instructions."
2424msgstr ""
2425
2426#: Mailman/Cgi/subscribe.py:181
2427msgid ""
2428"The email address you supplied is banned from this\n"
2429"        mailing list.  If you think this restriction is erroneous, please\n"
2430"        contact the list owners at %(listowner)s."
2431msgstr ""
2432
2433#: Mailman/Cgi/subscribe.py:185
2434msgid ""
2435"The email address you supplied is not valid.  (E.g. it must contain an\n"
2436"`@'.)"
2437msgstr ""
2438
2439#: Mailman/Cgi/subscribe.py:189
2440msgid ""
2441"Your subscription is not allowed because the email address you gave is\n"
2442"insecure."
2443msgstr ""
2444
2445#: Mailman/Cgi/subscribe.py:197
2446msgid ""
2447"Confirmation from your email address is required, to prevent anyone from\n"
2448"subscribing you without permission.  Instructions are being sent to you at\n"
2449"%(email)s.  Please note your subscription will not start until you confirm\n"
2450"your subscription."
2451msgstr ""
2452
2453#: Mailman/Cgi/subscribe.py:209
2454msgid ""
2455"Your subscription request was deferred because %(x)s.  Your request has "
2456"been\n"
2457"forwarded to the list moderator.  You will receive email informing you of "
2458"the\n"
2459"moderator's decision when they get to your request."
2460msgstr ""
2461
2462#: Mailman/Cgi/subscribe.py:216 Mailman/Commands/cmd_confirm.py:61
2463msgid "You are already subscribed."
2464msgstr ""
2465
2466#: Mailman/Cgi/subscribe.py:230
2467msgid "Mailman privacy alert"
2468msgstr ""
2469
2470#: Mailman/Cgi/subscribe.py:231
2471msgid ""
2472"An attempt was made to subscribe your address to the mailing list\n"
2473"%(listaddr)s.  You are already subscribed to this mailing list.\n"
2474"\n"
2475"Note that the list membership is not public, so it is possible that a bad\n"
2476"person was trying to probe the list for its membership.  This would be a\n"
2477"privacy violation if we let them do this, but we didn't.\n"
2478"\n"
2479"If you submitted the subscription request and forgot that you were already\n"
2480"subscribed to the list, then you can ignore this message.  If you suspect "
2481"that\n"
2482"an attempt is being made to covertly discover whether you are a member of "
2483"this\n"
2484"list, and you are worried about your privacy, then feel free to send a "
2485"message\n"
2486"to the list administrator at %(listowner)s.\n"
2487msgstr ""
2488
2489#: Mailman/Cgi/subscribe.py:250
2490msgid "This list does not support digest delivery."
2491msgstr ""
2492
2493#: Mailman/Cgi/subscribe.py:252
2494msgid "This list only supports digest delivery."
2495msgstr ""
2496
2497#: Mailman/Cgi/subscribe.py:259
2498msgid "You have been successfully subscribed to the %(realname)s mailing list."
2499msgstr ""
2500
2501#: Mailman/Commands/cmd_confirm.py:18
2502msgid ""
2503"\n"
2504"    confirm <confirmation-string>\n"
2505"        Confirm an action.  The confirmation-string is required and should "
2506"be\n"
2507"        supplied by a mailback confirmation notice.\n"
2508msgstr ""
2509
2510#: Mailman/Commands/cmd_confirm.py:41 Mailman/Commands/cmd_lists.py:40
2511#: Mailman/Commands/cmd_set.py:133 Mailman/Commands/cmd_subscribe.py:69
2512#: Mailman/Commands/cmd_unsubscribe.py:52 Mailman/Commands/cmd_who.py:65
2513msgid "Usage:"
2514msgstr ""
2515
2516#: Mailman/Commands/cmd_confirm.py:50
2517msgid ""
2518"Invalid confirmation string.  Note that confirmation strings expire\n"
2519"approximately %(days)s days after the initial subscription request.  If "
2520"your\n"
2521"confirmation has expired, please try to re-submit your original request or\n"
2522"message."
2523msgstr ""
2524
2525#: Mailman/Commands/cmd_confirm.py:56
2526msgid "Your request has been forwarded to the list moderator for approval."
2527msgstr ""
2528
2529#: Mailman/Commands/cmd_confirm.py:64
2530msgid ""
2531"You are not currently a member.  Have you already unsubscribed or changed\n"
2532"your email address?"
2533msgstr ""
2534
2535#: Mailman/Commands/cmd_confirm.py:69
2536msgid ""
2537"You are currently banned from subscribing to this list.  If you think this\n"
2538"restriction is erroneous, please contact the list owners at\n"
2539"%(owneraddr)s."
2540msgstr ""
2541
2542#: Mailman/Commands/cmd_confirm.py:74
2543msgid ""
2544"You were not invited to this mailing list.  The invitation has been "
2545"discarded,\n"
2546"and both list administrators have been alerted."
2547msgstr ""
2548
2549#: Mailman/Commands/cmd_confirm.py:78
2550msgid "Bad approval password given.  Held message is still being held."
2551msgstr ""
2552
2553#: Mailman/Commands/cmd_confirm.py:87
2554msgid "Confirmation succeeded"
2555msgstr ""
2556
2557#: Mailman/Commands/cmd_echo.py:17
2558msgid ""
2559"\n"
2560"    echo [args]\n"
2561"        Simply echo an acknowledgement.  Args are echoed back unchanged.\n"
2562msgstr ""
2563
2564#: Mailman/Commands/cmd_end.py:17
2565msgid ""
2566"\n"
2567"    end\n"
2568"        Stop processing commands.  Use this if your mail program "
2569"automatically\n"
2570"        adds a signature file.\n"
2571msgstr ""
2572
2573#: Mailman/Commands/cmd_help.py:17
2574msgid ""
2575"\n"
2576"    help\n"
2577"        Print this help message.\n"
2578msgstr ""
2579
2580#: Mailman/Commands/cmd_help.py:47
2581msgid "You can access your personal options via the following url:"
2582msgstr ""
2583
2584#: Mailman/Commands/cmd_info.py:17
2585msgid ""
2586"\n"
2587"    info\n"
2588"        Get information about this mailing list.\n"
2589msgstr ""
2590
2591#: Mailman/Commands/cmd_info.py:39 Mailman/Commands/cmd_lists.py:62
2592msgid "n/a"
2593msgstr ""
2594
2595#: Mailman/Commands/cmd_info.py:44
2596msgid "List name:    %(listname)s"
2597msgstr ""
2598
2599#: Mailman/Commands/cmd_info.py:45
2600msgid "Description:  %(description)s"
2601msgstr ""
2602
2603#: Mailman/Commands/cmd_info.py:46
2604msgid "Postings to:  %(postaddr)s"
2605msgstr ""
2606
2607#: Mailman/Commands/cmd_info.py:47
2608msgid "List Helpbot: %(requestaddr)s"
2609msgstr ""
2610
2611#: Mailman/Commands/cmd_info.py:48
2612msgid "List Owners:  %(owneraddr)s"
2613msgstr ""
2614
2615#: Mailman/Commands/cmd_info.py:49
2616msgid "More information: %(listurl)s"
2617msgstr ""
2618
2619#: Mailman/Commands/cmd_join.py:17
2620msgid "The `join' command is synonymous with `subscribe'.\n"
2621msgstr ""
2622
2623#: Mailman/Commands/cmd_leave.py:17
2624msgid "The `leave' command is synonymous with `unsubscribe'.\n"
2625msgstr ""
2626
2627#: Mailman/Commands/cmd_lists.py:17
2628msgid ""
2629"\n"
2630"    lists\n"
2631"        See a list of the public mailing lists on this GNU Mailman server.\n"
2632msgstr ""
2633
2634#: Mailman/Commands/cmd_lists.py:44
2635msgid "Public mailing lists at %(hostname)s:"
2636msgstr ""
2637
2638#: Mailman/Commands/cmd_lists.py:66
2639msgid "%(i)3d. List name:   %(realname)s"
2640msgstr ""
2641
2642#: Mailman/Commands/cmd_lists.py:67
2643msgid "     Description: %(description)s"
2644msgstr ""
2645
2646#: Mailman/Commands/cmd_lists.py:68
2647msgid "     Requests to: %(requestaddr)s"
2648msgstr ""
2649
2650#: Mailman/Commands/cmd_password.py:17
2651msgid ""
2652"\n"
2653"    password [<oldpassword> <newpassword>] [address=<address>]\n"
2654"        Retrieve or change your password.  With no arguments, this returns\n"
2655"        your current password.  With arguments <oldpassword> and "
2656"<newpassword>\n"
2657"        you can change your password.\n"
2658"\n"
2659"        If you're posting from an address other than your membership "
2660"address,\n"
2661"        specify your membership address with `address=<address>' (no "
2662"brackets\n"
2663"        around the email address, and no quotes!).  Note that in this case "
2664"the\n"
2665"        response is always sent to the subscribed address.\n"
2666msgstr ""
2667
2668#: Mailman/Commands/cmd_password.py:51 Mailman/Commands/cmd_password.py:66
2669msgid "Your password is: %(password)s"
2670msgstr ""
2671
2672#: Mailman/Commands/cmd_password.py:57 Mailman/Commands/cmd_password.py:72
2673#: Mailman/Commands/cmd_password.py:95 Mailman/Commands/cmd_password.py:121
2674#: Mailman/Commands/cmd_set.py:149 Mailman/Commands/cmd_set.py:219
2675msgid "You are not a member of the %(listname)s mailing list"
2676msgstr ""
2677
2678#: Mailman/Commands/cmd_password.py:85 Mailman/Commands/cmd_password.py:111
2679msgid ""
2680"You did not give the correct old password, so your password has not been\n"
2681"changed.  Use the no argument version of the password command to retrieve "
2682"your\n"
2683"current password, then try again."
2684msgstr ""
2685
2686#: Mailman/Commands/cmd_password.py:89 Mailman/Commands/cmd_password.py:115
2687msgid ""
2688"\n"
2689"Usage:"
2690msgstr ""
2691
2692#: Mailman/Commands/cmd_remove.py:17
2693msgid "The `remove' command is synonymous with `unsubscribe'.\n"
2694msgstr ""
2695
2696#: Mailman/Commands/cmd_set.py:26
2697msgid ""
2698"\n"
2699"    set ...\n"
2700"        Set or view your membership options.\n"
2701"\n"
2702"        Use `set help' (without the quotes) to get a more detailed list of "
2703"the\n"
2704"        options you can change.\n"
2705"\n"
2706"        Use `set show' (without the quotes) to view your current option\n"
2707"        settings.\n"
2708msgstr ""
2709
2710#: Mailman/Commands/cmd_set.py:37
2711msgid ""
2712"\n"
2713"    set help\n"
2714"        Show this detailed help.\n"
2715"\n"
2716"    set show [address=<address>]\n"
2717"        View your current option settings.  If you're posting from an "
2718"address\n"
2719"        other than your membership address, specify your membership address\n"
2720"        with `address=<address>' (no brackets around the email address, and "
2721"no\n"
2722"        quotes!).\n"
2723"\n"
2724"    set authenticate <password> [address=<address>]\n"
2725"        To set any of your options, you must include this command first, "
2726"along\n"
2727"        with your membership password.  If you're posting from an address\n"
2728"        other than your membership address, specify your membership address\n"
2729"        with `address=<address>' (no brackets around the email address, and "
2730"no\n"
2731"        quotes!).\n"
2732"\n"
2733"    set ack on\n"
2734"    set ack off\n"
2735"        When the `ack' option is turned on, you will receive an\n"
2736"        acknowledgement message whenever you post a message to the list.\n"
2737"\n"
2738"    set digest plain\n"
2739"    set digest mime\n"
2740"    set digest off\n"
2741"        When the `digest' option is turned off, you will receive postings\n"
2742"        immediately when they are posted.  Use `set digest plain' if "
2743"instead\n"
2744"        you want to receive postings bundled into a plain text digest\n"
2745"        (i.e. RFC 1153 digest).  Use `set digest mime' if instead you want "
2746"to\n"
2747"        receive postings bundled together into a MIME digest.\n"
2748"\n"
2749"    set delivery on\n"
2750"    set delivery off\n"
2751"        Turn delivery on or off.  This does not unsubscribe you, but "
2752"instead\n"
2753"        tells Mailman not to deliver messages to you for now.  This is "
2754"useful\n"
2755"        if you're going on vacation.  Be sure to use `set delivery on' when\n"
2756"        you return from vacation!\n"
2757"\n"
2758"    set myposts on\n"
2759"    set myposts off\n"
2760"        Use `set myposts off' to not receive copies of messages you post to\n"
2761"        the list.  This has no effect if you're receiving digests.\n"
2762"\n"
2763"    set hide on\n"
2764"    set hide off\n"
2765"        Use `set hide on' to conceal your email address when people request\n"
2766"        the membership list.\n"
2767"\n"
2768"    set duplicates on\n"
2769"    set duplicates off\n"
2770"        Use `set duplicates off' if you want Mailman to not send you "
2771"messages\n"
2772"        if your address is explicitly mentioned in the To: or Cc: fields of\n"
2773"        the message.  This can reduce the number of duplicate postings you\n"
2774"        will receive.\n"
2775"\n"
2776"    set reminders on\n"
2777"    set reminders off\n"
2778"        Use `set reminders off' if you want to disable the monthly password\n"
2779"        reminder for this mailing list.\n"
2780msgstr ""
2781
2782#: Mailman/Commands/cmd_set.py:122
2783msgid "Bad set command: %(subcmd)s"
2784msgstr ""
2785
2786#: Mailman/Commands/cmd_set.py:151
2787msgid "Your current option settings:"
2788msgstr ""
2789
2790#: Mailman/Commands/cmd_set.py:153 Mailman/Commands/cmd_set.py:191
2791#: Mailman/Commands/cmd_set.py:194 Mailman/Commands/cmd_set.py:198
2792#: Mailman/Commands/cmd_set.py:202
2793msgid "off"
2794msgstr ""
2795
2796#: Mailman/Commands/cmd_set.py:153 Mailman/Commands/cmd_set.py:191
2797#: Mailman/Commands/cmd_set.py:194 Mailman/Commands/cmd_set.py:198
2798#: Mailman/Commands/cmd_set.py:202
2799msgid "on"
2800msgstr ""
2801
2802#: Mailman/Commands/cmd_set.py:154
2803msgid "    ack %(onoff)s"
2804msgstr ""
2805
2806#: Mailman/Commands/cmd_set.py:160
2807msgid "    digest plain"
2808msgstr ""
2809
2810#: Mailman/Commands/cmd_set.py:162
2811msgid "    digest mime"
2812msgstr ""
2813
2814#: Mailman/Commands/cmd_set.py:164
2815msgid "    digest off"
2816msgstr ""
2817
2818#: Mailman/Commands/cmd_set.py:169
2819msgid "delivery on"
2820msgstr ""
2821
2822#: Mailman/Commands/cmd_set.py:171 Mailman/Commands/cmd_set.py:174
2823#: Mailman/Commands/cmd_set.py:177 Mailman/Commands/cmd_set.py:181
2824msgid "delivery off"
2825msgstr ""
2826
2827#: Mailman/Commands/cmd_set.py:172
2828msgid "by you"
2829msgstr ""
2830
2831#: Mailman/Commands/cmd_set.py:175
2832msgid "by the admin"
2833msgstr ""
2834
2835#: Mailman/Commands/cmd_set.py:178
2836msgid "due to bounces"
2837msgstr ""
2838
2839#: Mailman/Commands/cmd_set.py:186
2840msgid "    %(status)s (%(how)s on %(date)s)"
2841msgstr ""
2842
2843#: Mailman/Commands/cmd_set.py:192
2844msgid "    myposts %(onoff)s"
2845msgstr ""
2846
2847#: Mailman/Commands/cmd_set.py:195
2848msgid "    hide %(onoff)s"
2849msgstr ""
2850
2851#: Mailman/Commands/cmd_set.py:199
2852msgid "    duplicates %(onoff)s"
2853msgstr ""
2854
2855#: Mailman/Commands/cmd_set.py:203
2856msgid "    reminders %(onoff)s"
2857msgstr ""
2858
2859#: Mailman/Commands/cmd_set.py:224
2860msgid "You did not give the correct password"
2861msgstr ""
2862
2863#: Mailman/Commands/cmd_set.py:236 Mailman/Commands/cmd_set.py:283
2864msgid "Bad argument: %(arg)s"
2865msgstr ""
2866
2867#: Mailman/Commands/cmd_set.py:241 Mailman/Commands/cmd_set.py:261
2868msgid "Not authenticated"
2869msgstr ""
2870
2871#: Mailman/Commands/cmd_set.py:254
2872msgid "ack option set"
2873msgstr ""
2874
2875#: Mailman/Commands/cmd_set.py:286
2876msgid "digest option set"
2877msgstr ""
2878
2879#: Mailman/Commands/cmd_set.py:301
2880msgid "delivery enabled"
2881msgstr ""
2882
2883#: Mailman/Commands/cmd_set.py:304
2884msgid "delivery disabled by user"
2885msgstr ""
2886
2887#: Mailman/Commands/cmd_set.py:316
2888msgid "myposts option set"
2889msgstr ""
2890
2891#: Mailman/Commands/cmd_set.py:327
2892msgid "hide option set"
2893msgstr ""
2894
2895#: Mailman/Commands/cmd_set.py:339
2896msgid "duplicates option set"
2897msgstr ""
2898
2899#: Mailman/Commands/cmd_set.py:351
2900msgid "reminder option set"
2901msgstr ""
2902
2903#: Mailman/Commands/cmd_stop.py:17
2904msgid "stop is synonymous with the end command.\n"
2905msgstr ""
2906
2907#: Mailman/Commands/cmd_subscribe.py:17
2908msgid ""
2909"\n"
2910"    subscribe [password] [digest|nodigest] [address=<address>]\n"
2911"        Subscribe to this mailing list.  Your password must be given to\n"
2912"        unsubscribe or change your options, but if you omit the password, "
2913"one\n"
2914"        will be generated for you.  You may be periodically reminded of "
2915"your\n"
2916"        password.\n"
2917"\n"
2918"        The next argument may be either: `nodigest' or `digest' (no "
2919"quotes!).\n"
2920"        If you wish to subscribe an address other than the address you sent\n"
2921"        this request from, you may specify `address=<address>' (no brackets\n"
2922"        around the email address, and no quotes!)\n"
2923msgstr ""
2924
2925#: Mailman/Commands/cmd_subscribe.py:62
2926msgid "Bad digest specifier: %(arg)s"
2927msgstr ""
2928
2929#: Mailman/Commands/cmd_subscribe.py:84
2930msgid "No valid address found to subscribe"
2931msgstr ""
2932
2933#: Mailman/Commands/cmd_subscribe.py:105
2934msgid ""
2935"The email address you supplied is banned from this mailing list.\n"
2936"If you think this restriction is erroneous, please contact the list\n"
2937"owners at %(listowner)s."
2938msgstr ""
2939
2940#: Mailman/Commands/cmd_subscribe.py:111
2941msgid ""
2942"Mailman won't accept the given email address as a valid address.\n"
2943"(E.g. it must have an @ in it.)"
2944msgstr ""
2945
2946#: Mailman/Commands/cmd_subscribe.py:116
2947msgid ""
2948"Your subscription is not allowed because\n"
2949"the email address you gave is insecure."
2950msgstr ""
2951
2952#: Mailman/Commands/cmd_subscribe.py:121
2953msgid "You are already subscribed!"
2954msgstr ""
2955
2956#: Mailman/Commands/cmd_subscribe.py:125
2957msgid "No one can subscribe to the digest of this list!"
2958msgstr ""
2959
2960#: Mailman/Commands/cmd_subscribe.py:128
2961msgid "This list only supports digest subscriptions!"
2962msgstr ""
2963
2964#: Mailman/Commands/cmd_subscribe.py:134
2965msgid ""
2966"Your subscription request has been forwarded to the list administrator\n"
2967"at %(listowner)s for review."
2968msgstr ""
2969
2970#: Mailman/Commands/cmd_subscribe.py:139
2971msgid "Subscription request succeeded."
2972msgstr ""
2973
2974#: Mailman/Commands/cmd_unsubscribe.py:17
2975msgid ""
2976"\n"
2977"    unsubscribe [password] [address=<address>]\n"
2978"        Unsubscribe from the mailing list.  If given, your password must "
2979"match\n"
2980"        your current password.  If omitted, a confirmation email will be "
2981"sent\n"
2982"        to the unsubscribing address. If you wish to unsubscribe an address\n"
2983"        other than the address you sent this request from, you may specify\n"
2984"        `address=<address>' (no brackets around the email address, and no\n"
2985"        quotes!)\n"
2986msgstr ""
2987
2988#: Mailman/Commands/cmd_unsubscribe.py:62
2989msgid "%(address)s is not a member of the %(listname)s mailing list"
2990msgstr ""
2991
2992#: Mailman/Commands/cmd_unsubscribe.py:69
2993msgid ""
2994"Your unsubscription request has been forwarded to the list administrator "
2995"for\n"
2996"approval."
2997msgstr ""
2998
2999#: Mailman/Commands/cmd_unsubscribe.py:84
3000msgid "You gave the wrong password"
3001msgstr ""
3002
3003#: Mailman/Commands/cmd_unsubscribe.py:87
3004msgid "Unsubscription request succeeded."
3005msgstr ""
3006
3007#: Mailman/Commands/cmd_who.py:29
3008msgid ""
3009"\n"
3010"    who\n"
3011"        See everyone who is on this mailing list.\n"
3012msgstr ""
3013
3014#: Mailman/Commands/cmd_who.py:34
3015msgid ""
3016"\n"
3017"    who password [address=<address>]\n"
3018"        See everyone who is on this mailing list.  The roster is limited to\n"
3019"        list members only, and you must supply your membership password to\n"
3020"        retrieve it.  If you're posting from an address other than your\n"
3021"        membership address, specify your membership address with\n"
3022"        `address=<address>' (no brackets around the email address, and no\n"
3023"        quotes!)\n"
3024msgstr ""
3025
3026#: Mailman/Commands/cmd_who.py:44
3027msgid ""
3028"\n"
3029"    who password\n"
3030"        See everyone who is on this mailing list.  The roster is limited to\n"
3031"        list administrators and moderators only; you must supply the list\n"
3032"        admin or moderator password to retrieve the roster.\n"
3033msgstr ""
3034
3035#: Mailman/Commands/cmd_who.py:110
3036msgid "You are not allowed to retrieve the list membership."
3037msgstr ""
3038
3039#: Mailman/Commands/cmd_who.py:116
3040msgid "This list has no members."
3041msgstr ""
3042
3043#: Mailman/Commands/cmd_who.py:129
3044msgid "Non-digest (regular) members:"
3045msgstr ""
3046
3047#: Mailman/Commands/cmd_who.py:132
3048msgid "Digest members:"
3049msgstr ""
3050
3051#: Mailman/Defaults.py:1320
3052msgid "Catalan"
3053msgstr ""
3054
3055#: Mailman/Defaults.py:1321
3056msgid "Czech"
3057msgstr ""
3058
3059#: Mailman/Defaults.py:1322
3060msgid "Danish"
3061msgstr ""
3062
3063#: Mailman/Defaults.py:1323
3064msgid "German"
3065msgstr ""
3066
3067#: Mailman/Defaults.py:1324
3068msgid "English (USA)"
3069msgstr ""
3070
3071#: Mailman/Defaults.py:1325
3072msgid "Spanish (Spain)"
3073msgstr ""
3074
3075#: Mailman/Defaults.py:1326
3076msgid "Estonian"
3077msgstr ""
3078
3079#: Mailman/Defaults.py:1327
3080msgid "Euskara"
3081msgstr ""
3082
3083#: Mailman/Defaults.py:1328
3084msgid "Finnish"
3085msgstr ""
3086
3087#: Mailman/Defaults.py:1329
3088msgid "French"
3089msgstr ""
3090
3091#: Mailman/Defaults.py:1330
3092msgid "Croatian"
3093msgstr ""
3094
3095#: Mailman/Defaults.py:1331
3096msgid "Hungarian"
3097msgstr ""
3098
3099#: Mailman/Defaults.py:1332
3100msgid "Interlingua"
3101msgstr ""
3102
3103#: Mailman/Defaults.py:1333
3104msgid "Italian"
3105msgstr ""
3106
3107#: Mailman/Defaults.py:1334
3108msgid "Japanese"
3109msgstr ""
3110
3111#: Mailman/Defaults.py:1335
3112msgid "Korean"
3113msgstr ""
3114
3115#: Mailman/Defaults.py:1336
3116msgid "Lithuanian"
3117msgstr ""
3118
3119#: Mailman/Defaults.py:1337
3120msgid "Dutch"
3121msgstr ""
3122
3123#: Mailman/Defaults.py:1338
3124msgid "Norwegian"
3125msgstr ""
3126
3127#: Mailman/Defaults.py:1339
3128msgid "Polish"
3129msgstr ""
3130
3131#: Mailman/Defaults.py:1340
3132msgid "Portuguese"
3133msgstr ""
3134
3135#: Mailman/Defaults.py:1341
3136msgid "Portuguese (Brazil)"
3137msgstr ""
3138
3139#: Mailman/Defaults.py:1342
3140msgid "Romanian"
3141msgstr ""
3142
3143#: Mailman/Defaults.py:1343
3144msgid "Russian"
3145msgstr ""
3146
3147#: Mailman/Defaults.py:1344
3148msgid "Serbian"
3149msgstr ""
3150
3151#: Mailman/Defaults.py:1345
3152msgid "Slovenian"
3153msgstr ""
3154
3155#: Mailman/Defaults.py:1346
3156msgid "Swedish"
3157msgstr ""
3158
3159#: Mailman/Defaults.py:1347
3160msgid "Turkish"
3161msgstr ""
3162
3163#: Mailman/Defaults.py:1348
3164msgid "Ukrainian"
3165msgstr ""
3166
3167#: Mailman/Defaults.py:1349
3168msgid "Chinese (China)"
3169msgstr ""
3170
3171#: Mailman/Defaults.py:1350
3172msgid "Chinese (Taiwan)"
3173msgstr ""
3174
3175#: Mailman/Deliverer.py:53
3176msgid ""
3177"Note: Since this is a list of mailing lists, administrative\n"
3178"notices like the password reminder will be sent to\n"
3179"your membership administrative address, %(addr)s."
3180msgstr ""
3181
3182#: Mailman/Deliverer.py:73
3183msgid " (Digest mode)"
3184msgstr ""
3185
3186#: Mailman/Deliverer.py:79
3187msgid "Welcome to the \"%(realname)s\" mailing list%(digmode)s"
3188msgstr ""
3189
3190#: Mailman/Deliverer.py:88
3191msgid "You have been unsubscribed from the %(realname)s mailing list"
3192msgstr ""
3193
3194#: Mailman/Deliverer.py:115
3195msgid "%(listfullname)s mailing list reminder"
3196msgstr ""
3197
3198#: Mailman/Deliverer.py:167 Mailman/Deliverer.py:186
3199msgid "Hostile subscription attempt detected"
3200msgstr ""
3201
3202#: Mailman/Deliverer.py:168
3203msgid ""
3204"%(address)s was invited to a different mailing\n"
3205"list, but in a deliberate malicious attempt they tried to confirm the\n"
3206"invitation to your list.  We just thought you'd like to know.  No further\n"
3207"action by you is required."
3208msgstr ""
3209
3210#: Mailman/Deliverer.py:187
3211msgid ""
3212"You invited %(address)s to your list, but in a\n"
3213"deliberate malicious attempt, they tried to confirm the invitation to a\n"
3214"different list.  We just thought you'd like to know.  No further action by "
3215"you\n"
3216"is required."
3217msgstr ""
3218
3219#: Mailman/Deliverer.py:220
3220msgid "%(listname)s mailing list probe message"
3221msgstr ""
3222
3223#: Mailman/Errors.py:114
3224msgid "For some unknown reason"
3225msgstr ""
3226
3227#: Mailman/Errors.py:120 Mailman/Errors.py:143
3228msgid "Your message was rejected"
3229msgstr ""
3230
3231#: Mailman/Gui/Archive.py:25
3232msgid "Archiving Options"
3233msgstr ""
3234
3235#: Mailman/Gui/Archive.py:31
3236msgid "List traffic archival policies."
3237msgstr ""
3238
3239#: Mailman/Gui/Archive.py:34
3240msgid "Archive messages?"
3241msgstr ""
3242
3243#: Mailman/Gui/Archive.py:36
3244msgid "private"
3245msgstr ""
3246
3247#: Mailman/Gui/Archive.py:36
3248msgid "public"
3249msgstr ""
3250
3251#: Mailman/Gui/Archive.py:37
3252msgid "Is archive file source for public or private archival?"
3253msgstr ""
3254
3255#: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78
3256msgid "Monthly"
3257msgstr ""
3258
3259#: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78
3260msgid "Quarterly"
3261msgstr ""
3262
3263#: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78
3264msgid "Yearly"
3265msgstr ""
3266
3267#: Mailman/Gui/Archive.py:41 Mailman/Gui/Digest.py:79
3268msgid "Daily"
3269msgstr ""
3270
3271#: Mailman/Gui/Archive.py:41 Mailman/Gui/Digest.py:79
3272msgid "Weekly"
3273msgstr ""
3274
3275#: Mailman/Gui/Archive.py:43
3276msgid "How often should a new archive volume be started?"
3277msgstr ""
3278
3279#: Mailman/Gui/Autoresponse.py:31
3280msgid "Auto-responder"
3281msgstr ""
3282
3283#: Mailman/Gui/Autoresponse.py:39
3284msgid ""
3285"Auto-responder characteristics.<p>\n"
3286"\n"
3287"In the text fields below, string interpolation is performed with\n"
3288"the following key/value substitutions:\n"
3289"<p><ul>\n"
3290"    <li><b>listname</b> - <em>gets the name of the mailing list</em>\n"
3291"    <li><b>listurl</b> - <em>gets the list's listinfo URL</em>\n"
3292"    <li><b>requestemail</b> - <em>gets the list's -request address</em>\n"
3293"    <li><b>owneremail</b> - <em>gets the list's -owner address</em>\n"
3294"</ul>\n"
3295"\n"
3296"<p>For each text field, you can either enter the text directly into the "
3297"text\n"
3298"box, or you can specify a file on your local system to upload as the text."
3299msgstr ""
3300
3301#: Mailman/Gui/Autoresponse.py:55
3302msgid ""
3303"Should Mailman send an auto-response to mailing list\n"
3304"             posters?"
3305msgstr ""
3306
3307#: Mailman/Gui/Autoresponse.py:60
3308msgid "Auto-response text to send to mailing list posters."
3309msgstr ""
3310
3311#: Mailman/Gui/Autoresponse.py:63
3312msgid ""
3313"Should Mailman send an auto-response to emails sent to the\n"
3314"             -owner address?"
3315msgstr ""
3316
3317#: Mailman/Gui/Autoresponse.py:68
3318msgid "Auto-response text to send to -owner emails."
3319msgstr ""
3320
3321#: Mailman/Gui/Autoresponse.py:71
3322msgid "Yes, w/discard"
3323msgstr ""
3324
3325#: Mailman/Gui/Autoresponse.py:71
3326msgid "Yes, w/forward"
3327msgstr ""
3328
3329#: Mailman/Gui/Autoresponse.py:72
3330msgid ""
3331"Should Mailman send an auto-response to emails sent to the\n"
3332"             -request address?  If you choose yes, decide whether you want\n"
3333"             Mailman to discard the original email, or forward it on to the\n"
3334"             system as a normal mail command."
3335msgstr ""
3336
3337#: Mailman/Gui/Autoresponse.py:79
3338msgid "Auto-response text to send to -request emails."
3339msgstr ""
3340
3341#: Mailman/Gui/Autoresponse.py:82
3342msgid ""
3343"Number of days between auto-responses to either the mailing\n"
3344"             list or -request/-owner address from the same poster.  Set to\n"
3345"             zero (or negative) for no grace period (i.e. auto-respond to\n"
3346"             every message)."
3347msgstr ""
3348
3349#: Mailman/Gui/Bounce.py:26
3350msgid "Bounce processing"
3351msgstr ""
3352
3353#: Mailman/Gui/Bounce.py:32
3354msgid ""
3355"These policies control the automatic bounce processing system\n"
3356"            in Mailman.  Here's an overview of how it works.\n"
3357"\n"
3358"            <p>When a bounce is received, Mailman tries to extract two "
3359"pieces\n"
3360"            of information from the message: the address of the member the\n"
3361"            message was intended for, and the severity of the problem "
3362"causing\n"
3363"            the bounce.  The severity can be either <em>hard</em> or\n"
3364"            <em>soft</em> meaning either a fatal error occurred, or a\n"
3365"            transient error occurred.  When in doubt, a hard severity is "
3366"used.\n"
3367"\n"
3368"            <p>If no member address can be extracted from the bounce, then "
3369"the\n"
3370"            bounce is usually discarded.  Otherwise, each member is assigned "
3371"a\n"
3372"            <em>bounce score</em> and every time we encounter a bounce from\n"
3373"            this member we increment the score.  Hard bounces increment by "
3374"1\n"
3375"            while soft bounces increment by 0.5.  We only increment the "
3376"bounce\n"
3377"            score once per day, so even if we receive ten hard bounces from "
3378"a\n"
3379"            member per day, their score will increase by only 1 for that "
3380"day.\n"
3381"\n"
3382"            <p>When a member's bounce score is greater than the\n"
3383"            <a href=\"?VARHELP=bounce/bounce_score_threshold\">bounce score\n"
3384"            threshold</a>, the subscription is disabled.  Once disabled, "
3385"the\n"
3386"            member will not receive any postings from the list until their\n"
3387"            membership is explicitly re-enabled (either by the list\n"
3388"            administrator or the user).  However, they will receive "
3389"occasional\n"
3390"            reminders that their membership has been disabled, and these\n"
3391"            reminders will include information about how to re-enable their\n"
3392"            membership.\n"
3393"\n"
3394"            <p>You can control both the\n"
3395"            <a href=\"?VARHELP=bounce/bounce_you_are_disabled_warnings"
3396"\">number\n"
3397"            of reminders</a> the member will receive and the\n"
3398"            <a href=\"?VARHELP=bounce/"
3399"bounce_you_are_disabled_warnings_interval\"\n"
3400"            >frequency</a> with which these reminders are sent.\n"
3401"\n"
3402"            <p>There is one other important configuration variable; after a\n"
3403"            certain period of time -- during which no bounces from the "
3404"member\n"
3405"            are received -- the bounce information is\n"
3406"            <a href=\"?VARHELP=bounce/bounce_info_stale_after\">considered\n"
3407"            stale</a> and discarded.  Thus by adjusting this value, and the\n"
3408"            score threshold, you can control how quickly bouncing members "
3409"are\n"
3410"            disabled.  You should tune both of these to the frequency and\n"
3411"            traffic volume of your list."
3412msgstr ""
3413
3414#: Mailman/Gui/Bounce.py:75
3415msgid "Bounce detection sensitivity"
3416msgstr ""
3417
3418#: Mailman/Gui/Bounce.py:78
3419msgid "Should Mailman perform automatic bounce processing?"
3420msgstr ""
3421
3422#: Mailman/Gui/Bounce.py:79
3423msgid ""
3424"By setting this value to <em>No</em>, you disable all\n"
3425"             automatic bounce processing for this list, however bounce\n"
3426"             messages will still be discarded so that the list "
3427"administrator\n"
3428"             isn't inundated with them."
3429msgstr ""
3430
3431#: Mailman/Gui/Bounce.py:85
3432msgid ""
3433"The maximum member bounce score before the member's\n"
3434"             subscription is disabled.  This value can be a floating point\n"
3435"             number."
3436msgstr ""
3437
3438#: Mailman/Gui/Bounce.py:88
3439msgid ""
3440"Each subscriber is assigned a bounce score, as a floating\n"
3441"             point number.  Whenever Mailman receives a bounce from a list\n"
3442"             member, that member's score is incremented.  Hard bounces "
3443"(fatal\n"
3444"             errors) increase the score by 1, while soft bounces (temporary\n"
3445"             errors) increase the score by 0.5.  Only one bounce per day\n"
3446"             counts against a member's score, so even if 10 bounces are\n"
3447"             received for a member on the same day, their score will "
3448"increase\n"
3449"             by just 1.\n"
3450"\n"
3451"             This variable describes the upper limit for a member's bounce\n"
3452"             score, above which they are automatically disabled, but not\n"
3453"             removed from the mailing list."
3454msgstr ""
3455
3456#: Mailman/Gui/Bounce.py:102
3457msgid ""
3458"The number of days after which a member's bounce information\n"
3459"             is discarded, if no new bounces have been received in the\n"
3460"             interim.  This value must be an integer."
3461msgstr ""
3462
3463#: Mailman/Gui/Bounce.py:107
3464msgid ""
3465"How many <em>Your Membership Is Disabled</em> warnings a\n"
3466"             disabled member should get before their address is removed "
3467"from\n"
3468"             the mailing list.  Set to 0 to immediately remove an address "
3469"from\n"
3470"             the list once their bounce score exceeds the threshold.  This\n"
3471"             value must be an integer."
3472msgstr ""
3473
3474#: Mailman/Gui/Bounce.py:114
3475msgid ""
3476"The number of days between sending the <em>Your Membership\n"
3477"             Is Disabled</em> warnings.  This value must be an integer."
3478msgstr ""
3479
3480#: Mailman/Gui/Bounce.py:117 Mailman/Gui/General.py:262
3481msgid "Notifications"
3482msgstr ""
3483
3484#: Mailman/Gui/Bounce.py:121
3485msgid ""
3486"Should Mailman send you, the list owner, any bounce messages\n"
3487"             that failed to be detected by the bounce processor?  <em>Yes</"
3488"em>\n"
3489"             is recommended."
3490msgstr ""
3491
3492#: Mailman/Gui/Bounce.py:124
3493msgid ""
3494"While Mailman's bounce detector is fairly robust, it's\n"
3495"             impossible to detect every bounce format in the world.  You\n"
3496"             should keep this variable set to <em>Yes</em> for two reasons: "
3497"1)\n"
3498"             If this really is a permanent bounce from one of your members,\n"
3499"             you should probably manually remove them from your list, and "
3500"2)\n"
3501"             you might want to send the message on to the Mailman "
3502"developers\n"
3503"             so that this new format can be added to its known set.\n"
3504"\n"
3505"             <p>If you really can't be bothered, then set this variable to\n"
3506"             <em>No</em> and all non-detected bounces will be discarded\n"
3507"             without further processing.\n"
3508"\n"
3509"             <p><b>Note:</b> This setting will also affect all messages "
3510"sent\n"
3511"             to your list's -admin address.  This address is deprecated and\n"
3512"             should never be used, but some people may still send mail to "
3513"this\n"
3514"             address.  If this happens, and this variable is set to\n"
3515"             <em>No</em> those messages too will get discarded.  You may "
3516"want\n"
3517"             to set up an\n"
3518"             <a href=\"?VARHELP=autoreply/autoresponse_admin_text"
3519"\">autoresponse\n"
3520"             message</a> for email to the -owner and -admin address."
3521msgstr ""
3522
3523#: Mailman/Gui/Bounce.py:147
3524msgid ""
3525"Should Mailman notify you, the list owner, when bounces\n"
3526"             cause a member's subscription to be disabled?"
3527msgstr ""
3528
3529#: Mailman/Gui/Bounce.py:149
3530msgid ""
3531"By setting this value to <em>No</em>, you turn off\n"
3532"             notification messages that are normally sent to the list "
3533"owners\n"
3534"             when a member's delivery is disabled due to excessive bounces.\n"
3535"             An attempt to notify the member will always be made."
3536msgstr ""
3537
3538#: Mailman/Gui/Bounce.py:156
3539msgid ""
3540"Should Mailman notify you, the list owner, when bounces\n"
3541"             cause a member to be unsubscribed?"
3542msgstr ""
3543
3544#: Mailman/Gui/Bounce.py:158
3545msgid ""
3546"By setting this value to <em>No</em>, you turn off\n"
3547"             notification messages that are normally sent to the list "
3548"owners\n"
3549"             when a member is unsubscribed due to excessive bounces.  An\n"
3550"             attempt to notify the member will always be made."
3551msgstr ""
3552
3553#: Mailman/Gui/Bounce.py:185
3554msgid ""
3555"Bad value for <a href=\"?VARHELP=bounce/%(property)s\"\n"
3556"                >%(property)s</a>: %(val)s"
3557msgstr ""
3558
3559#: Mailman/Gui/ContentFilter.py:30
3560msgid "Content&nbsp;filtering"
3561msgstr ""
3562
3563#: Mailman/Gui/ContentFilter.py:37
3564msgid "Forward to List Owner"
3565msgstr ""
3566
3567#: Mailman/Gui/ContentFilter.py:39
3568msgid "Preserve"
3569msgstr ""
3570
3571#: Mailman/Gui/ContentFilter.py:42
3572msgid ""
3573"Policies concerning the content of list traffic.\n"
3574"\n"
3575"            <p>Content filtering works like this: when a message is\n"
3576"            received by the list and you have enabled content filtering, "
3577"the\n"
3578"            individual attachments are first compared to the\n"
3579"            <a href=\"?VARHELP=contentfilter/filter_mime_types\">filter\n"
3580"            types</a>.  If the attachment type matches an entry in the "
3581"filter\n"
3582"            types, it is discarded.\n"
3583"\n"
3584"            <p>Then, if there are <a\n"
3585"            href=\"?VARHELP=contentfilter/pass_mime_types\">pass types</a>\n"
3586"            defined, any attachment type that does <em>not</em> match a\n"
3587"            pass type is also discarded.  If there are no pass types "
3588"defined,\n"
3589"            this check is skipped.\n"
3590"\n"
3591"            <p>After this initial filtering, any <tt>multipart</tt>\n"
3592"            attachments that are empty are removed.  If the outer message "
3593"is\n"
3594"            left empty after this filtering, then the whole message is\n"
3595"            discarded.\n"
3596"\n"
3597"            <p> Then, each <tt>multipart/alternative</tt> section will\n"
3598"            be replaced by just the first alternative that is non-empty "
3599"after\n"
3600"            filtering if\n"
3601"            <a href=\"?VARHELP=contentfilter/collapse_alternatives\"\n"
3602"            >collapse_alternatives</a> is enabled.\n"
3603"\n"
3604"            <p>Finally, any <tt>text/html</tt> parts that are left in the\n"
3605"            message may be converted to <tt>text/plain</tt> if\n"
3606"            <a href=\"?VARHELP=contentfilter/convert_html_to_plaintext\"\n"
3607"            >convert_html_to_plaintext</a> is enabled and the site is\n"
3608"            configured to allow these conversions."
3609msgstr ""
3610
3611#: Mailman/Gui/ContentFilter.py:75
3612msgid ""
3613"Should Mailman filter the content of list traffic according\n"
3614"             to the settings below?"
3615msgstr ""
3616
3617#: Mailman/Gui/ContentFilter.py:79
3618msgid ""
3619"Remove message attachments that have a matching content\n"
3620"             type."
3621msgstr ""
3622
3623#: Mailman/Gui/ContentFilter.py:82
3624msgid ""
3625"Use this option to remove each message attachment that\n"
3626"             matches one of these content types.  Each line should contain "
3627"a\n"
3628"             string naming a MIME <tt>type/subtype</tt>,\n"
3629"             e.g. <tt>image/gif</tt>.  Leave off the subtype to remove all\n"
3630"             parts with a matching major content type, e.g. <tt>image</tt>.\n"
3631"\n"
3632"             <p>Blank lines are ignored.\n"
3633"\n"
3634"             <p>See also <a href=\"?VARHELP=contentfilter/pass_mime_types\"\n"
3635"             >pass_mime_types</a> for a content type whitelist."
3636msgstr ""
3637
3638#: Mailman/Gui/ContentFilter.py:94
3639msgid ""
3640"Remove message attachments that don't have a matching\n"
3641"             content type.  Leave this field blank to skip this filter\n"
3642"             test."
3643msgstr ""
3644
3645#: Mailman/Gui/ContentFilter.py:98
3646msgid ""
3647"Use this option to remove each message attachment that does\n"
3648"             not have a matching content type.  Requirements and formats "
3649"are\n"
3650"             exactly like <a href=\"?VARHELP=contentfilter/filter_mime_types"
3651"\"\n"
3652"             >filter_mime_types</a>.\n"
3653"\n"
3654"             <p><b>Note:</b> if you add entries to this list but don't add\n"
3655"             <tt>multipart</tt> to this list, any messages with attachments\n"
3656"             will be rejected by the pass filter."
3657msgstr ""
3658
3659#: Mailman/Gui/ContentFilter.py:108
3660msgid ""
3661"Remove message attachments that have a matching filename\n"
3662"             extension."
3663msgstr ""
3664
3665#: Mailman/Gui/ContentFilter.py:112
3666msgid ""
3667"Remove message attachments that don't have a matching\n"
3668"             filename extension.  Leave this field blank to skip this "
3669"filter\n"
3670"             test."
3671msgstr ""
3672
3673#: Mailman/Gui/ContentFilter.py:117
3674msgid ""
3675"Should Mailman collapse multipart/alternative to its\n"
3676"             first part content?"
3677msgstr ""
3678
3679#: Mailman/Gui/ContentFilter.py:121
3680msgid ""
3681"Should Mailman convert <tt>text/html</tt> parts to plain\n"
3682"             text?  This conversion happens after MIME attachments have "
3683"been\n"
3684"             stripped."
3685msgstr ""
3686
3687#: Mailman/Gui/ContentFilter.py:127
3688msgid ""
3689"Action to take when a message matches the content filtering\n"
3690"             rules."
3691msgstr ""
3692
3693#: Mailman/Gui/ContentFilter.py:130
3694msgid ""
3695"One of these actions is taken when the message matches one of\n"
3696"             the content filtering rules, meaning, the top-level\n"
3697"             content type matches one of the <a\n"
3698"             href=\"?VARHELP=contentfilter/filter_mime_types\"\n"
3699"             >filter_mime_types</a>, or the top-level content type does\n"
3700"             <strong>not</strong> match one of the\n"
3701"             <a href=\"?VARHELP=contentfilter/pass_mime_types\"\n"
3702"             >pass_mime_types</a>, or if after filtering the subparts of "
3703"the\n"
3704"             message, the message ends up empty.\n"
3705"\n"
3706"             <p>Note this action is not taken if after filtering the "
3707"message\n"
3708"             still contains content.  In that case the message is always\n"
3709"             forwarded on to the list membership.\n"
3710"\n"
3711"             <p>When messages are discarded, a log entry is written\n"
3712"             containing the Message-ID of the discarded message.  When\n"
3713"             messages are rejected or forwarded to the list owner, a reason\n"
3714"             for the rejection is included in the bounce message to the\n"
3715"             original author.  When messages are preserved, they are saved "
3716"in\n"
3717"             a special queue directory on disk for the site administrator "
3718"to\n"
3719"             view (and possibly rescue) but otherwise discarded.  This last\n"
3720"             option is only available if enabled by the site\n"
3721"             administrator."
3722msgstr ""
3723
3724#: Mailman/Gui/ContentFilter.py:171
3725msgid "Bad MIME type ignored: %(spectype)s"
3726msgstr ""
3727
3728#: Mailman/Gui/Digest.py:36
3729msgid "Digest options"
3730msgstr ""
3731
3732#: Mailman/Gui/Digest.py:44
3733msgid "Batched-delivery digest characteristics."
3734msgstr ""
3735
3736#: Mailman/Gui/Digest.py:47
3737msgid "Can list members choose to receive list traffic bunched in digests?"
3738msgstr ""
3739
3740#: Mailman/Gui/Digest.py:51
3741msgid "Digest"
3742msgstr ""
3743
3744#: Mailman/Gui/Digest.py:51
3745msgid "Regular"
3746msgstr ""
3747
3748#: Mailman/Gui/Digest.py:52
3749msgid "Which delivery mode is the default for new users?"
3750msgstr ""
3751
3752#: Mailman/Gui/Digest.py:55
3753msgid "MIME"
3754msgstr ""
3755
3756#: Mailman/Gui/Digest.py:55
3757msgid "Plain"
3758msgstr ""
3759
3760#: Mailman/Gui/Digest.py:56
3761msgid "When receiving digests, which format is default?"
3762msgstr ""
3763
3764#: Mailman/Gui/Digest.py:59
3765msgid "How big in Kb should a digest be before it gets sent out?"
3766msgstr ""
3767
3768#: Mailman/Gui/Digest.py:63
3769msgid ""
3770"Should a digest be dispatched daily when the size threshold isn't reached?"
3771msgstr ""
3772
3773#: Mailman/Gui/Digest.py:67
3774msgid "Header added to every digest"
3775msgstr ""
3776
3777#: Mailman/Gui/Digest.py:68
3778msgid ""
3779"Text attached (as an initial message, before the table of contents) to the "
3780"top of digests. "
3781msgstr ""
3782
3783#: Mailman/Gui/Digest.py:73
3784msgid "Footer added to every digest"
3785msgstr ""
3786
3787#: Mailman/Gui/Digest.py:74
3788msgid "Text attached (as a final message) to the bottom of digests. "
3789msgstr ""
3790
3791#: Mailman/Gui/Digest.py:80
3792msgid "How often should a new digest volume be started?"
3793msgstr ""
3794
3795#: Mailman/Gui/Digest.py:81
3796msgid ""
3797"When a new digest volume is started, the volume number is\n"
3798"             incremented and the issue number is reset to 1."
3799msgstr ""
3800
3801#: Mailman/Gui/Digest.py:85
3802msgid "Should Mailman start a new digest volume?"
3803msgstr ""
3804
3805#: Mailman/Gui/Digest.py:86
3806msgid ""
3807"Setting this option instructs Mailman to start a new volume\n"
3808"             with the next digest sent out."
3809msgstr ""
3810
3811#: Mailman/Gui/Digest.py:90
3812msgid ""
3813"Should Mailman send the next digest right now, if it is not\n"
3814"             empty?"
3815msgstr ""
3816
3817#: Mailman/Gui/Digest.py:145
3818msgid ""
3819"The next digest will be sent as volume\n"
3820"            %(volume)s, number %(number)s"
3821msgstr ""
3822
3823#: Mailman/Gui/Digest.py:150
3824msgid "A digest has been sent."
3825msgstr ""
3826
3827#: Mailman/Gui/Digest.py:152
3828msgid "There was no digest to send."
3829msgstr ""
3830
3831#: Mailman/Gui/GUIBase.py:156
3832msgid "Invalid value for variable: %(property)s"
3833msgstr ""
3834
3835#: Mailman/Gui/GUIBase.py:160
3836msgid "Bad email address for option %(property)s: %(val)s"
3837msgstr ""
3838
3839#: Mailman/Gui/GUIBase.py:186
3840msgid ""
3841"The following illegal substitution variables were\n"
3842"                found in the <code>%(property)s</code> string:\n"
3843"                <code>%(bad)s</code>\n"
3844"                <p>Your list may not operate properly until you correct "
3845"this\n"
3846"                problem."
3847msgstr ""
3848
3849#: Mailman/Gui/GUIBase.py:200
3850msgid ""
3851"Your <code>%(property)s</code> string appeared to\n"
3852"                    have some correctable problems in its new value.\n"
3853"                    The fixed value will be used instead.  Please\n"
3854"                    double check that this is what you intended.\n"
3855"                    "
3856msgstr ""
3857
3858#: Mailman/Gui/General.py:33
3859msgid "General Options"
3860msgstr ""
3861
3862#: Mailman/Gui/General.py:47
3863msgid "Conceal the member's address"
3864msgstr ""
3865
3866#: Mailman/Gui/General.py:48
3867msgid "Acknowledge the member's posting"
3868msgstr ""
3869
3870#: Mailman/Gui/General.py:49
3871msgid "Do not send a copy of a member's own post"
3872msgstr ""
3873
3874#: Mailman/Gui/General.py:51
3875msgid "Filter out duplicate messages to list members (if possible)"
3876msgstr ""
3877
3878#: Mailman/Gui/General.py:58
3879msgid ""
3880"Fundamental list characteristics, including descriptive\n"
3881"            info and basic behaviors."
3882msgstr ""
3883
3884#: Mailman/Gui/General.py:61
3885msgid "General list personality"
3886msgstr ""
3887
3888#: Mailman/Gui/General.py:64
3889msgid "The public name of this list (make case-changes only)."
3890msgstr ""
3891
3892#: Mailman/Gui/General.py:65
3893msgid ""
3894"The capitalization of this name can be changed to make it\n"
3895"             presentable in polite company as a proper noun, or to make an\n"
3896"             acronym part all upper case, etc.  However, the name will be\n"
3897"             advertised as the email address (e.g., in subscribe "
3898"confirmation\n"
3899"             notices), so it should <em>not</em> be otherwise altered.  "
3900"(Email\n"
3901"             addresses are not case sensitive, but they are sensitive to\n"
3902"             almost everything else :-)"
3903msgstr ""
3904
3905#: Mailman/Gui/General.py:74
3906msgid ""
3907"The list administrator email addresses.  Multiple\n"
3908"             administrator addresses, each on separate line is okay."
3909msgstr ""
3910
3911#: Mailman/Gui/General.py:77
3912msgid ""
3913"There are two ownership roles associated with each mailing\n"
3914"             list.  The <em>list administrators</em> are the people who "
3915"have\n"
3916"             ultimate control over all parameters of this mailing list.  "
3917"They\n"
3918"             are able to change any list configuration variable available\n"
3919"             through these administration web pages.\n"
3920"\n"
3921"             <p>The <em>list moderators</em> have more limited permissions;\n"
3922"             they are not able to change any list configuration variable, "
3923"but\n"
3924"             they are allowed to tend to pending administration requests,\n"
3925"             including approving or rejecting held subscription requests, "
3926"and\n"
3927"             disposing of held postings.  Of course, the <em>list\n"
3928"             administrators</em> can also tend to pending requests.\n"
3929"\n"
3930"             <p>In order to split the list ownership duties into\n"
3931"             administrators and moderators, you must\n"
3932"             <a href=\"passwords\">set a separate moderator password</a>,\n"
3933"             and also provide the <a href=\"?VARHELP=general/moderator"
3934"\">email\n"
3935"             addresses of the list moderators</a>.  Note that the field you\n"
3936"             are changing here specifies the list administrators."
3937msgstr ""
3938
3939#: Mailman/Gui/General.py:98
3940msgid ""
3941"The list moderator email addresses.  Multiple\n"
3942"             moderator addresses, each on separate line is okay."
3943msgstr ""
3944
3945#: Mailman/Gui/General.py:101
3946msgid ""
3947"There are two ownership roles associated with each mailing\n"
3948"             list.  The <em>list administrators</em> are the people who "
3949"have\n"
3950"             ultimate control over all parameters of this mailing list.  "
3951"They\n"
3952"             are able to change any list configuration variable available\n"
3953"             through these administration web pages.\n"
3954"\n"
3955"             <p>The <em>list moderators</em> have more limited permissions;\n"
3956"             they are not able to change any list configuration variable, "
3957"but\n"
3958"             they are allowed to tend to pending administration requests,\n"
3959"             including approving or rejecting held subscription requests, "
3960"and\n"
3961"             disposing of held postings.  Of course, the <em>list\n"
3962"             administrators</em> can also tend to pending requests.\n"
3963"\n"
3964"             <p>In order to split the list ownership duties into\n"
3965"             administrators and moderators, you must\n"
3966"             <a href=\"passwords\">set a separate moderator password</a>,\n"
3967"             and also provide the email addresses of the list moderators in\n"
3968"             this section.  Note that the field you are changing here\n"
3969"             specifies the list moderators."
3970msgstr ""
3971
3972#: Mailman/Gui/General.py:122
3973msgid "A terse phrase identifying this list."
3974msgstr ""
3975
3976#: Mailman/Gui/General.py:124
3977msgid ""
3978"This description is used when the mailing list is listed with\n"
3979"                other mailing lists, or in headers, and so forth.  It "
3980"should\n"
3981"                be as succinct as you can get it, while still identifying "
3982"what\n"
3983"                the list is."
3984msgstr ""
3985
3986#: Mailman/Gui/General.py:130
3987msgid ""
3988"An introductory description - a few paragraphs - about the\n"
3989"             list.  It will be included, as html, at the top of the "
3990"listinfo\n"
3991"             page.  Carriage returns will end a paragraph - see the details\n"
3992"             for more info."
3993msgstr ""
3994
3995#: Mailman/Gui/General.py:134
3996msgid ""
3997"The text will be treated as html <em>except</em> that\n"
3998"             newlines will be translated to &lt;br&gt; - so you can use "
3999"links,\n"
4000"             preformatted text, etc, but don't put in carriage returns "
4001"except\n"
4002"             where you mean to separate paragraphs.  And review your changes "
4003"-\n"
4004"             bad html (like some unterminated HTML constructs) can prevent\n"
4005"             display of the entire listinfo page."
4006msgstr ""
4007
4008#: Mailman/Gui/General.py:142
4009msgid "Prefix for subject line of list postings."
4010msgstr ""
4011
4012#: Mailman/Gui/General.py:143
4013msgid ""
4014"This text will be prepended to subject lines of messages\n"
4015"             posted to the list, to distinguish mailing list messages in\n"
4016"             mailbox summaries.  Brevity is premium here, it's ok to "
4017"shorten\n"
4018"             long mailing list names to something more concise, as long as "
4019"it\n"
4020"             still identifies the mailing list.\n"
4021"             You can also add a sequential number by %%d substitution\n"
4022"             directive. eg.; [listname %%d] -> [listname 123]\n"
4023"                            (listname %%05d) -> (listname 00123)\n"
4024"             "
4025msgstr ""
4026
4027#: Mailman/Gui/General.py:154
4028msgid ""
4029"Hide the sender of a message, replacing it with the list\n"
4030"             address (Removes From, Sender and Reply-To fields)"
4031msgstr ""
4032
4033#: Mailman/Gui/General.py:157
4034msgid "<tt>Reply-To:</tt> header munging"
4035msgstr ""
4036
4037#: Mailman/Gui/General.py:160
4038msgid ""
4039"Should any existing <tt>Reply-To:</tt> header found in the\n"
4040"             original message be stripped?  If so, this will be done\n"
4041"             regardless of whether an explict <tt>Reply-To:</tt> header is\n"
4042"             added by Mailman or not."
4043msgstr ""
4044
4045#: Mailman/Gui/General.py:166
4046msgid "Explicit address"
4047msgstr ""
4048
4049#: Mailman/Gui/General.py:166
4050msgid "Poster"
4051msgstr ""
4052
4053#: Mailman/Gui/General.py:166
4054msgid "This list"
4055msgstr ""
4056
4057#: Mailman/Gui/General.py:167
4058msgid ""
4059"Where are replies to list messages directed?\n"
4060"             <tt>Poster</tt> is <em>strongly</em> recommended for most "
4061"mailing\n"
4062"             lists."
4063msgstr ""
4064
4065#: Mailman/Gui/General.py:172
4066msgid ""
4067"This option controls what Mailman does to the\n"
4068"             <tt>Reply-To:</tt> header in messages flowing through this\n"
4069"             mailing list.  When set to <em>Poster</em>, no <tt>Reply-To:</"
4070"tt>\n"
4071"             header is added by Mailman, although if one is present in the\n"
4072"             original message, it is not stripped.  Setting this value to\n"
4073"             either <em>This list</em> or <em>Explicit address</em> causes\n"
4074"             Mailman to insert a specific <tt>Reply-To:</tt> header in all\n"
4075"             messages, overriding the header in the original message if\n"
4076"             necessary (<em>Explicit address</em> inserts the value of <a\n"
4077"             href=\"?VARHELP=general/reply_to_address\">reply_to_address</"
4078"a>).\n"
4079"\n"
4080"             <p>There are many reasons not to introduce or override the\n"
4081"             <tt>Reply-To:</tt> header.  One is that some posters depend on\n"
4082"             their own <tt>Reply-To:</tt> settings to convey their valid\n"
4083"             return address.  Another is that modifying <tt>Reply-To:</tt>\n"
4084"             makes it much more difficult to send private replies.  See <a\n"
4085"             href=\"http://www.unicom.com/pw/reply-to-harmful.html\">`Reply-"
4086"To'\n"
4087"             Munging Considered Harmful</a> for a general discussion of "
4088"this\n"
4089"             issue.  See <a\n"
4090"             href=\"http://www.metasystema.net/essays/reply-to.mhtml\">Reply-"
4091"To\n"
4092"             Munging Considered Useful</a> for a dissenting opinion.\n"
4093"\n"
4094"             <p>Some mailing lists have restricted posting privileges, with "
4095"a\n"
4096"             parallel list devoted to discussions.  Examples are `patches' "
4097"or\n"
4098"             `checkin' lists, where software changes are posted by a "
4099"revision\n"
4100"             control system, but discussion about the changes occurs on a\n"
4101"             developers mailing list.  To support these types of mailing\n"
4102"             lists, select <tt>Explicit address</tt> and set the\n"
4103"             <tt>Reply-To:</tt> address below to point to the parallel\n"
4104"             list."
4105msgstr ""
4106
4107#: Mailman/Gui/General.py:204
4108msgid "Explicit <tt>Reply-To:</tt> header."
4109msgstr ""
4110
4111#: Mailman/Gui/General.py:206
4112msgid ""
4113"This is the address set in the <tt>Reply-To:</tt> header\n"
4114"             when the <a\n"
4115"             href=\"?VARHELP=general/reply_goes_to_list"
4116"\">reply_goes_to_list</a>\n"
4117"             option is set to <em>Explicit address</em>.\n"
4118"\n"
4119"             <p>There are many reasons not to introduce or override the\n"
4120"             <tt>Reply-To:</tt> header.  One is that some posters depend on\n"
4121"             their own <tt>Reply-To:</tt> settings to convey their valid\n"
4122"             return address.  Another is that modifying <tt>Reply-To:</tt>\n"
4123"             makes it much more difficult to send private replies.  See <a\n"
4124"             href=\"http://www.unicom.com/pw/reply-to-harmful.html\">`Reply-"
4125"To'\n"
4126"             Munging Considered Harmful</a> for a general discussion of "
4127"this\n"
4128"             issue.  See <a\n"
4129"             href=\"http://www.metasystema.net/essays/reply-to.mhtml\">Reply-"
4130"To\n"
4131"             Munging Considered Useful</a> for a dissenting opinion.\n"
4132"\n"
4133"             <p>Some mailing lists have restricted posting privileges, with "
4134"a\n"
4135"             parallel list devoted to discussions.  Examples are `patches' "
4136"or\n"
4137"             `checkin' lists, where software changes are posted by a "
4138"revision\n"
4139"             control system, but discussion about the changes occurs on a\n"
4140"             developers mailing list.  To support these types of mailing\n"
4141"             lists, specify the explicit <tt>Reply-To:</tt> address here.  "
4142"You\n"
4143"             must also specify <tt>Explicit address</tt> in the\n"
4144"             <tt>reply_goes_to_list</tt>\n"
4145"             variable.\n"
4146"\n"
4147"             <p>Note that if the original message contains a\n"
4148"             <tt>Reply-To:</tt> header, it will not be changed."
4149msgstr ""
4150
4151#: Mailman/Gui/General.py:235
4152msgid "Umbrella list settings"
4153msgstr ""
4154
4155#: Mailman/Gui/General.py:238
4156msgid ""
4157"Send password reminders to, eg, \"-owner\" address instead of\n"
4158"             directly to user."
4159msgstr ""
4160
4161#: Mailman/Gui/General.py:241
4162msgid ""
4163"Set this to yes when this list is intended to cascade only\n"
4164"             to other mailing lists.  When set, meta notices like\n"
4165"             confirmations and password reminders will be directed to an\n"
4166"             address derived from the member's address - it will have the\n"
4167"             value of \"umbrella_member_suffix\" appended to the member's\n"
4168"             account name."
4169msgstr ""
4170
4171#: Mailman/Gui/General.py:249
4172msgid ""
4173"Suffix for use when this list is an umbrella for other\n"
4174"             lists, according to setting of previous \"umbrella_list\"\n"
4175"             setting."
4176msgstr ""
4177
4178#: Mailman/Gui/General.py:253
4179msgid ""
4180"When \"umbrella_list\" is set to indicate that this list has\n"
4181"             other mailing lists as members, then administrative notices "
4182"like\n"
4183"             confirmations and password reminders need to not be sent to "
4184"the\n"
4185"             member list addresses, but rather to the owner of those member\n"
4186"             lists.  In that case, the value of this setting is appended to\n"
4187"             the member's account name for such notices.  `-owner' is the\n"
4188"             typical choice.  This setting has no effect when \"umbrella_list"
4189"\"\n"
4190"             is \"No\"."
4191msgstr ""
4192
4193#: Mailman/Gui/General.py:265
4194msgid "Send monthly password reminders?"
4195msgstr ""
4196
4197#: Mailman/Gui/General.py:267
4198msgid ""
4199"Turn this on if you want password reminders to be sent once\n"
4200"             per month to your members.  Note that members may disable "
4201"their\n"
4202"             own individual password reminders."
4203msgstr ""
4204
4205#: Mailman/Gui/General.py:272
4206msgid ""
4207"List-specific text prepended to new-subscriber welcome\n"
4208"             message"
4209msgstr ""
4210
4211#: Mailman/Gui/General.py:275
4212msgid ""
4213"This value, if any, will be added to the front of the\n"
4214"             new-subscriber welcome message.  The rest of the welcome "
4215"message\n"
4216"             already describes the important addresses and URLs for the\n"
4217"             mailing list, so you don't need to include any of that kind of\n"
4218"             stuff here.  This should just contain mission-specific kinds "
4219"of\n"
4220"             things, like etiquette policies or team orientation, or that "
4221"kind\n"
4222"             of thing.\n"
4223"\n"
4224"             <p>Note that this text will be wrapped, according to the\n"
4225"             following rules:\n"
4226"             <ul><li>Each paragraph is filled so that no line is longer "
4227"than\n"
4228"                     70 characters.\n"
4229"                 <li>Any line that begins with whitespace is not filled.\n"
4230"                 <li>A blank line separates paragraphs.\n"
4231"             </ul>"
4232msgstr ""
4233
4234#: Mailman/Gui/General.py:292
4235msgid "Send welcome message to newly subscribed members?"
4236msgstr ""
4237
4238#: Mailman/Gui/General.py:293
4239msgid ""
4240"Turn this off only if you plan on subscribing people manually\n"
4241"             and don't want them to know that you did so.  This option is "
4242"most\n"
4243"             useful for transparently migrating lists from some other "
4244"mailing\n"
4245"             list manager to Mailman."
4246msgstr ""
4247
4248#: Mailman/Gui/General.py:299
4249msgid ""
4250"Text sent to people leaving the list.  If empty, no special\n"
4251"             text will be added to the unsubscribe message."
4252msgstr ""
4253
4254#: Mailman/Gui/General.py:303
4255msgid "Send goodbye message to members when they are unsubscribed?"
4256msgstr ""
4257
4258#: Mailman/Gui/General.py:306
4259msgid ""
4260"Should the list moderators get immediate notice of new\n"
4261"             requests, as well as daily notices about collected ones?"
4262msgstr ""
4263
4264#: Mailman/Gui/General.py:309
4265msgid ""
4266"List moderators (and list administrators) are sent daily\n"
4267"             reminders of requests pending approval, like subscriptions to "
4268"a\n"
4269"             moderated list, or postings that are being held for one reason "
4270"or\n"
4271"             another.  Setting this option causes notices to be sent\n"
4272"             immediately on the arrival of new requests as well."
4273msgstr ""
4274
4275#: Mailman/Gui/General.py:316
4276msgid ""
4277"Should administrator get notices of subscribes and\n"
4278"             unsubscribes?"
4279msgstr ""
4280
4281#: Mailman/Gui/General.py:321
4282msgid "Send mail to poster when their posting is held for approval?"
4283msgstr ""
4284
4285#: Mailman/Gui/General.py:324
4286msgid "Additional settings"
4287msgstr ""
4288
4289#: Mailman/Gui/General.py:327
4290msgid "Emergency moderation of all list traffic."
4291msgstr ""
4292
4293#: Mailman/Gui/General.py:328
4294msgid ""
4295"When this option is enabled, all list traffic is emergency\n"
4296"             moderated, i.e. held for moderation.  Turn this option on when\n"
4297"             your list is experiencing a flamewar and you want a cooling "
4298"off\n"
4299"             period."
4300msgstr ""
4301
4302#: Mailman/Gui/General.py:340
4303msgid ""
4304"Default options for new members joining this list.<input\n"
4305"             type=\"hidden\" name=\"new_member_options\" value=\"ignore\">"
4306msgstr ""
4307
4308#: Mailman/Gui/General.py:343
4309msgid ""
4310"When a new member is subscribed to this list, their initial\n"
4311"             set of options is taken from the this variable's setting."
4312msgstr ""
4313
4314#: Mailman/Gui/General.py:347
4315msgid ""
4316"(Administrivia filter) Check postings and intercept ones\n"
4317"             that seem to be administrative requests?"
4318msgstr ""
4319
4320#: Mailman/Gui/General.py:350
4321msgid ""
4322"Administrivia tests will check postings to see whether it's\n"
4323"             really meant as an administrative request (like subscribe,\n"
4324"             unsubscribe, etc), and will add it to the the administrative\n"
4325"             requests queue, notifying the administrator of the new "
4326"request,\n"
4327"             in the process."
4328msgstr ""
4329
4330#: Mailman/Gui/General.py:357
4331msgid ""
4332"Maximum length in kilobytes (KB) of a message body.  Use 0\n"
4333"             for no limit."
4334msgstr ""
4335
4336#: Mailman/Gui/General.py:361
4337msgid "Host name this list prefers for email."
4338msgstr ""
4339
4340#: Mailman/Gui/General.py:363
4341msgid ""
4342"The \"host_name\" is the preferred name for email to\n"
4343"             mailman-related addresses on this host, and generally should "
4344"be\n"
4345"             the mail host's exchanger address, if any.  This setting can "
4346"be\n"
4347"             useful for selecting among alternative names of a host that "
4348"has\n"
4349"             multiple addresses."
4350msgstr ""
4351
4352#: Mailman/Gui/General.py:375
4353msgid ""
4354"Should messages from this mailing list include the\n"
4355"                 <a href=\"http://www.faqs.org/rfcs/rfc2369.html\">RFC 2369</"
4356"a>\n"
4357"                 (i.e. <tt>List-*</tt>) headers?  <em>Yes</em> is highly\n"
4358"                 recommended."
4359msgstr ""
4360
4361#: Mailman/Gui/General.py:380
4362msgid ""
4363"RFC 2369 defines a set of List-* headers that are\n"
4364"                 normally added to every message sent to the list "
4365"membership.\n"
4366"                 These greatly aid end-users who are using standards "
4367"compliant\n"
4368"                 mail readers.  They should normally always be enabled.\n"
4369"\n"
4370"                 <p>However, not all mail readers are standards compliant "
4371"yet,\n"
4372"                 and if you have a large number of members who are using\n"
4373"                 non-compliant mail readers, they may be annoyed at these\n"
4374"                 headers.  You should first try to educate your members as "
4375"to\n"
4376"                 why these headers exist, and how to hide them in their "
4377"mail\n"
4378"                 clients.  As a last resort you can disable these headers, "
4379"but\n"
4380"                 this is not recommended (and in fact, your ability to "
4381"disable\n"
4382"                 these headers may eventually go away)."
4383msgstr ""
4384
4385#: Mailman/Gui/General.py:398
4386msgid "Should postings include the <tt>List-Post:</tt> header?"
4387msgstr ""
4388
4389#: Mailman/Gui/General.py:399
4390msgid ""
4391"The <tt>List-Post:</tt> header is one of the headers\n"
4392"             recommended by\n"
4393"             <a href=\"http://www.faqs.org/rfcs/rfc2369.html\">RFC 2369</"
4394"a>.\n"
4395"             However for some <em>announce-only</em> mailing lists, only a\n"
4396"             very select group of people are allowed to post to the list; "
4397"the\n"
4398"             general membership is usually not allowed to post.  For lists "
4399"of\n"
4400"             this nature, the <tt>List-Post:</tt> header is misleading.\n"
4401"             Select <em>No</em> to disable the inclusion of this header. "
4402"(This\n"
4403"             does not affect the inclusion of the other <tt>List-*:</tt>\n"
4404"             headers.)"
4405msgstr ""
4406
4407#: Mailman/Gui/General.py:414
4408msgid ""
4409"Discard held messages older than this number of days.\n"
4410"            Use 0 for no automatic discarding."
4411msgstr ""
4412
4413#: Mailman/Gui/General.py:424
4414msgid ""
4415"<b>real_name</b> attribute not\n"
4416"            changed!  It must differ from the list's name by case\n"
4417"            only."
4418msgstr ""
4419
4420#: Mailman/Gui/General.py:454
4421msgid ""
4422"You cannot add a Reply-To: to an explicit\n"
4423"            address if that address is blank.  Resetting these values."
4424msgstr ""
4425
4426#: Mailman/Gui/Language.py:34
4427msgid "Language&nbsp;options"
4428msgstr ""
4429
4430#: Mailman/Gui/Language.py:66
4431msgid "Natural language (internationalization) options."
4432msgstr ""
4433
4434#: Mailman/Gui/Language.py:71
4435msgid "Default language for this list."
4436msgstr ""
4437
4438#: Mailman/Gui/Language.py:72
4439msgid ""
4440"This is the default natural language for this mailing list.\n"
4441"             If <a href=\"?VARHELP=language/available_languages\">more than "
4442"one\n"
4443"             language</a> is supported then users will be able to select "
4444"their\n"
4445"             own preferences for when they interact with the list.  All "
4446"other\n"
4447"             interactions will be conducted in the default language.  This\n"
4448"             applies to both web-based and email-based messages, but not to\n"
4449"             email posted by list members."
4450msgstr ""
4451
4452#: Mailman/Gui/Language.py:82
4453msgid "Languages supported by this list."
4454msgstr ""
4455
4456#: Mailman/Gui/Language.py:84
4457msgid ""
4458"These are all the natural languages supported by this list.\n"
4459"             Note that the\n"
4460"             <a href=\"?VARHELP=language/preferred_language\">default\n"
4461"             language</a> must be included."
4462msgstr ""
4463
4464#: Mailman/Gui/Language.py:90
4465msgid "Always"
4466msgstr ""
4467
4468#: Mailman/Gui/Language.py:90
4469msgid "As needed"
4470msgstr ""
4471
4472#: Mailman/Gui/Language.py:90
4473msgid "Never"
4474msgstr ""
4475
4476#: Mailman/Gui/Language.py:91
4477msgid ""
4478"Encode the\n"
4479"             <a href=\"?VARHELP=general/subject_prefix\">subject\n"
4480"             prefix</a> even when it consists of only ASCII characters?"
4481msgstr ""
4482
4483#: Mailman/Gui/Language.py:95
4484msgid ""
4485"If your mailing list's default language uses a non-ASCII\n"
4486"             character set and the prefix contains non-ASCII characters, "
4487"the\n"
4488"             prefix will always be encoded according to the relevant\n"
4489"             standards.  However, if your prefix contains only ASCII\n"
4490"             characters, you may want to set this option to <em>Never</em> "
4491"to\n"
4492"             disable prefix encoding.  This can make the subject headers\n"
4493"             slightly more readable for users with mail readers that don't\n"
4494"             properly handle non-ASCII encodings.\n"
4495"\n"
4496"             <p>Note however, that if your mailing list receives both "
4497"encoded\n"
4498"             and unencoded subject headers, you might want to choose <em>As\n"
4499"             needed</em>.  Using this setting, Mailman will not encode "
4500"ASCII\n"
4501"             prefixes when the rest of the header contains only ASCII\n"
4502"             characters, but if the original header contains non-ASCII\n"
4503"             characters, it will encode the prefix.  This avoids an "
4504"ambiguity\n"
4505"             in the standards which could cause some mail readers to "
4506"display\n"
4507"             extra, or missing spaces between the prefix and the original\n"
4508"             header."
4509msgstr ""
4510
4511#: Mailman/Gui/Membership.py:26
4512msgid "Membership&nbsp;Management..."
4513msgstr ""
4514
4515#: Mailman/Gui/Membership.py:30
4516msgid "Membership&nbsp;List"
4517msgstr ""
4518
4519#: Mailman/Gui/Membership.py:31
4520msgid "Mass&nbsp;Subscription"
4521msgstr ""
4522
4523#: Mailman/Gui/Membership.py:32
4524msgid "Mass&nbsp;Removal"
4525msgstr ""
4526
4527#: Mailman/Gui/NonDigest.py:34
4528msgid "Non-digest&nbsp;options"
4529msgstr ""
4530
4531#: Mailman/Gui/NonDigest.py:42
4532msgid "Policies concerning immediately delivered list traffic."
4533msgstr ""
4534
4535#: Mailman/Gui/NonDigest.py:45
4536msgid ""
4537"Can subscribers choose to receive mail immediately, rather\n"
4538"             than in batched digests?"
4539msgstr ""
4540
4541#: Mailman/Gui/NonDigest.py:52
4542msgid "Full Personalization"
4543msgstr ""
4544
4545#: Mailman/Gui/NonDigest.py:54
4546msgid ""
4547"Should Mailman personalize each non-digest delivery?\n"
4548"                 This is often useful for announce-only lists, but <a\n"
4549"                 href=\"?VARHELP=nondigest/personalize\">read the details</"
4550"a>\n"
4551"                 section for a discussion of important performance\n"
4552"                 issues."
4553msgstr ""
4554
4555#: Mailman/Gui/NonDigest.py:60
4556msgid ""
4557"Normally, Mailman sends the regular delivery messages to\n"
4558"                 the mail server in batches.  This is much more efficent\n"
4559"                 because it reduces the amount of traffic between Mailman "
4560"and\n"
4561"                 the mail server.\n"
4562"\n"
4563"                 <p>However, some lists can benefit from a more "
4564"personalized\n"
4565"                 approach.  In this case, Mailman crafts a new message for\n"
4566"                 each member on the regular delivery list.  Turning this\n"
4567"                 feature on may degrade the performance of your site, so "
4568"you\n"
4569"                 need to carefully consider whether the trade-off is worth "
4570"it,\n"
4571"                 or whether there are other ways to accomplish what you "
4572"want.\n"
4573"                 You should also carefully monitor your system load to make\n"
4574"                 sure it is acceptable.\n"
4575"\n"
4576"                 <p>Select <em>No</em> to disable personalization and send\n"
4577"                 messages to the members in batches.  Select <em>Yes</em> "
4578"to\n"
4579"                 personalize deliveries and allow additional substitution\n"
4580"                 variables in message headers and footers (see below).  In\n"
4581"                 addition, by selecting <em>Full Personalization</em>, the\n"
4582"                 <code>To</code> header of posted messages will be modified "
4583"to\n"
4584"                 include the member's address instead of the list's posting\n"
4585"                 address.\n"
4586"\n"
4587"                 <p>When personalization is enabled, a few more expansion\n"
4588"                 variables that can be included in the <a\n"
4589"                 href=\"?VARHELP=nondigest/msg_header\">message header</a> "
4590"and\n"
4591"                 <a href=\"?VARHELP=nondigest/msg_footer\">message footer</"
4592"a>.\n"
4593"\n"
4594"                 <p>These additional substitution variables will be "
4595"available\n"
4596"                 for your headers and footers, when this feature is "
4597"enabled:\n"
4598"\n"
4599"                 <ul><li><b>user_address</b> - The address of the user,\n"
4600"                         coerced to lower case.\n"
4601"                     <li><b>user_delivered_to</b> - The case-preserved "
4602"address\n"
4603"                         that the user is subscribed with.\n"
4604"                     <li><b>user_password</b> - The user's password.\n"
4605"                     <li><b>user_name</b> - The user's full name.\n"
4606"                     <li><b>user_optionsurl</b> - The url to the user's "
4607"option\n"
4608"                         page.\n"
4609"                 </ul>\n"
4610"                 "
4611msgstr ""
4612
4613#: Mailman/Gui/NonDigest.py:109
4614msgid ""
4615"When <a href=\"?VARHELP=nondigest/personalize\">personalization</a> is "
4616"enabled\n"
4617"for this list, additional substitution variables are allowed in your "
4618"headers\n"
4619"and footers:\n"
4620"\n"
4621"<ul><li><b>user_address</b> - The address of the user,\n"
4622"        coerced to lower case.\n"
4623"    <li><b>user_delivered_to</b> - The case-preserved address\n"
4624"        that the user is subscribed with.\n"
4625"    <li><b>user_password</b> - The user's password.\n"
4626"    <li><b>user_name</b> - The user's full name.\n"
4627"    <li><b>user_optionsurl</b> - The url to the user's option\n"
4628"        page.\n"
4629"</ul>\n"
4630msgstr ""
4631
4632#: Mailman/Gui/NonDigest.py:128
4633msgid "Header added to mail sent to regular list members"
4634msgstr ""
4635
4636#: Mailman/Gui/NonDigest.py:129
4637msgid ""
4638"Text prepended to the top of every immediately-delivery\n"
4639"             message. "
4640msgstr ""
4641
4642#: Mailman/Gui/NonDigest.py:133
4643msgid "Footer added to mail sent to regular list members"
4644msgstr ""
4645
4646#: Mailman/Gui/NonDigest.py:134
4647msgid ""
4648"Text appended to the bottom of every immediately-delivery\n"
4649"             message. "
4650msgstr ""
4651
4652#: Mailman/Gui/NonDigest.py:140
4653msgid "Scrub attachments of regular delivery message?"
4654msgstr ""
4655
4656#: Mailman/Gui/NonDigest.py:141
4657msgid ""
4658"When you scrub attachments, they are stored in archive\n"
4659"             area and links are made in the message so that the member can\n"
4660"             access via web browser. If you want the attachments totally\n"
4661"             disappear, you can use content filter options."
4662msgstr ""
4663
4664#: Mailman/Gui/Passwords.py:27
4665msgid "Passwords"
4666msgstr ""
4667
4668#: Mailman/Gui/Privacy.py:37
4669msgid "Privacy options..."
4670msgstr ""
4671
4672#: Mailman/Gui/Privacy.py:41
4673msgid "Subscription&nbsp;rules"
4674msgstr ""
4675
4676#: Mailman/Gui/Privacy.py:42
4677msgid "Sender&nbsp;filters"
4678msgstr ""
4679
4680#: Mailman/Gui/Privacy.py:43
4681msgid "Recipient&nbsp;filters"
4682msgstr ""
4683
4684#: Mailman/Gui/Privacy.py:44
4685msgid "Spam&nbsp;filters"
4686msgstr ""
4687
4688#: Mailman/Gui/Privacy.py:58 Mailman/Gui/Usenet.py:63
4689msgid "None"
4690msgstr ""
4691
4692#: Mailman/Gui/Privacy.py:59 Mailman/Gui/Privacy.py:82
4693msgid "Confirm"
4694msgstr ""
4695
4696#: Mailman/Gui/Privacy.py:60 Mailman/Gui/Privacy.py:83
4697msgid "Require approval"
4698msgstr ""
4699
4700#: Mailman/Gui/Privacy.py:61 Mailman/Gui/Privacy.py:84
4701msgid "Confirm and approve"
4702msgstr ""
4703
4704#: Mailman/Gui/Privacy.py:63 Mailman/Gui/Privacy.py:86
4705msgid "What steps are required for subscription?<br>"
4706msgstr ""
4707
4708#: Mailman/Gui/Privacy.py:64
4709msgid ""
4710"None - no verification steps (<em>Not\n"
4711"                           Recommended </em>)<br>\n"
4712"                           Confirm (*) - email confirmation step required "
4713"<br>\n"
4714"                           Require approval - require list administrator\n"
4715"                           Approval for subscriptions <br>\n"
4716"                           Confirm and approve - both confirm and approve\n"
4717"                           \n"
4718"                           <p>(*) when someone requests a subscription,\n"
4719"                           Mailman sends them a notice with a unique\n"
4720"                           subscription request number that they must reply "
4721"to\n"
4722"                           in order to subscribe.<br>\n"
4723"\n"
4724"                           This prevents mischievous (or malicious) people\n"
4725"                           from creating subscriptions for others without\n"
4726"                           their consent."
4727msgstr ""
4728
4729#: Mailman/Gui/Privacy.py:87
4730msgid ""
4731"Confirm (*) - email confirmation required <br>\n"
4732"                           Require approval - require list administrator\n"
4733"                           approval for subscriptions <br>\n"
4734"                           Confirm and approve - both confirm and approve\n"
4735"                           \n"
4736"                           <p>(*) when someone requests a subscription,\n"
4737"                           Mailman sends them a notice with a unique\n"
4738"                           subscription request number that they must reply "
4739"to\n"
4740"                           in order to subscribe.<br> This prevents\n"
4741"                           mischievous (or malicious) people from creating\n"
4742"                           subscriptions for others without their consent."
4743msgstr ""
4744
4745#: Mailman/Gui/Privacy.py:103
4746msgid ""
4747"This section allows you to configure subscription and\n"
4748"            membership exposure policy.  You can also control whether this\n"
4749"            list is public or not.  See also the\n"
4750"            <a href=\"%(admin)s/archive\">Archival Options</a> section for\n"
4751"            separate archive-related privacy settings."
4752msgstr ""
4753
4754#: Mailman/Gui/Privacy.py:109
4755msgid "Subscribing"
4756msgstr ""
4757
4758#: Mailman/Gui/Privacy.py:111
4759msgid ""
4760"Advertise this list when people ask what lists are on this\n"
4761"             machine?"
4762msgstr ""
4763
4764#: Mailman/Gui/Privacy.py:117
4765msgid ""
4766"Is the list moderator's approval required for unsubscription\n"
4767"             requests?  (<em>No</em> is recommended)"
4768msgstr ""
4769
4770#: Mailman/Gui/Privacy.py:120
4771msgid ""
4772"When members want to leave a list, they will make an\n"
4773"             unsubscription request, either via the web or via email.\n"
4774"             Normally it is best for you to allow open unsubscriptions so "
4775"that\n"
4776"             users can easily remove themselves from mailing lists (they "
4777"get\n"
4778"             really upset if they can't get off lists!).\n"
4779"\n"
4780"             <p>For some lists though, you may want to impose moderator\n"
4781"             approval before an unsubscription request is processed.  "
4782"Examples\n"
4783"             of such lists include a corporate mailing list that all "
4784"employees\n"
4785"             are required to be members of."
4786msgstr ""
4787
4788#: Mailman/Gui/Privacy.py:131
4789msgid "Ban list"
4790msgstr ""
4791
4792#: Mailman/Gui/Privacy.py:133
4793msgid ""
4794"List of addresses which are banned from membership in this\n"
4795"             mailing list."
4796msgstr ""
4797
4798#: Mailman/Gui/Privacy.py:136
4799msgid ""
4800"Addresses in this list are banned outright from subscribing\n"
4801"             to this mailing list, with no further moderation required.  "
4802"Add\n"
4803"             addresses one per line; start the line with a ^ character to\n"
4804"             designate a regular expression match."
4805msgstr ""
4806
4807#: Mailman/Gui/Privacy.py:141
4808msgid "Membership exposure"
4809msgstr ""
4810
4811#: Mailman/Gui/Privacy.py:143
4812msgid "Anyone"
4813msgstr ""
4814
4815#: Mailman/Gui/Privacy.py:143
4816msgid "List admin only"
4817msgstr ""
4818
4819#: Mailman/Gui/Privacy.py:143
4820msgid "List members"
4821msgstr ""
4822
4823#: Mailman/Gui/Privacy.py:144
4824msgid "Who can view subscription list?"
4825msgstr ""
4826
4827#: Mailman/Gui/Privacy.py:146
4828msgid ""
4829"When set, the list of subscribers is protected by member or\n"
4830"             admin password authentication."
4831msgstr ""
4832
4833#: Mailman/Gui/Privacy.py:150
4834msgid ""
4835"Show member addresses so they're not directly recognizable\n"
4836"             as email addresses?"
4837msgstr ""
4838
4839#: Mailman/Gui/Privacy.py:152
4840msgid ""
4841"Setting this option causes member email addresses to be\n"
4842"             transformed when they are presented on list web pages (both in\n"
4843"             text and as links), so they're not trivially recognizable as\n"
4844"             email addresses.  The intention is to prevent the addresses\n"
4845"             from being snarfed up by automated web scanners for use by\n"
4846"             spammers."
4847msgstr ""
4848
4849#: Mailman/Gui/Privacy.py:162
4850msgid ""
4851"When a message is posted to the list, a series of\n"
4852"            moderation steps are take to decide whether the a moderator "
4853"must\n"
4854"            first approve the message or not.  This section contains the\n"
4855"            controls for moderation of both member and non-member postings.\n"
4856"\n"
4857"            <p>Member postings are held for moderation if their\n"
4858"            <b>moderation flag</b> is turned on.  You can control whether\n"
4859"            member postings are moderated by default or not.\n"
4860"\n"
4861"            <p>Non-member postings can be automatically\n"
4862"            <a href=\"?VARHELP=privacy/sender/accept_these_nonmembers\"\n"
4863"            >accepted</a>,\n"
4864"            <a href=\"?VARHELP=privacy/sender/hold_these_nonmembers\">held "
4865"for\n"
4866"            moderation</a>,\n"
4867"            <a href=\"?VARHELP=privacy/sender/reject_these_nonmembers\"\n"
4868"            >rejected</a> (bounced), or\n"
4869"            <a href=\"?VARHELP=privacy/sender/discard_these_nonmembers\"\n"
4870"            >discarded</a>,\n"
4871"            either individually or as a group.  Any\n"
4872"            posting from a non-member who is not explicitly accepted,\n"
4873"            rejected, or discarded, will have their posting filtered by the\n"
4874"            <a href=\"?VARHELP=privacy/sender/generic_nonmember_action"
4875"\">general\n"
4876"            non-member rules</a>.\n"
4877"\n"
4878"            <p>In the text boxes below, add one address per line; start the\n"
4879"            line with a ^ character to designate a <a href=\n"
4880"            \"http://www.python.org/doc/current/lib/module-re.html\"\n"
4881"            >Python regular expression</a>.  When entering backslashes, do "
4882"so\n"
4883"            as if you were using Python raw strings (i.e. you generally "
4884"just\n"
4885"            use a single backslash).\n"
4886"\n"
4887"            <p>Note that non-regexp matches are always done first."
4888msgstr ""
4889
4890#: Mailman/Gui/Privacy.py:195
4891msgid "Member filters"
4892msgstr ""
4893
4894#: Mailman/Gui/Privacy.py:198
4895msgid "By default, should new list member postings be moderated?"
4896msgstr ""
4897
4898#: Mailman/Gui/Privacy.py:200
4899msgid ""
4900"Each list member has a <em>moderation flag</em> which says\n"
4901"             whether messages from the list member can be posted directly "
4902"to\n"
4903"             the list, or must first be approved by the list moderator.  "
4904"When\n"
4905"             the moderation flag is turned on, list member postings must be\n"
4906"             approved first.  You, the list administrator can decide whether "
4907"a\n"
4908"             specific individual's postings will be moderated or not.\n"
4909"\n"
4910"             <p>When a new member is subscribed, their initial moderation "
4911"flag\n"
4912"             takes its value from this option.  Turn this option off to "
4913"accept\n"
4914"             member postings by default.  Turn this option on to, by "
4915"default,\n"
4916"             moderate member postings first.  You can always manually set "
4917"an\n"
4918"             individual member's moderation bit by using the\n"
4919"             <a href=\"%(adminurl)s/members\">membership management\n"
4920"             screens</a>."
4921msgstr ""
4922
4923#: Mailman/Gui/Privacy.py:217
4924msgid ""
4925"Action to take when a moderated member posts to the\n"
4926"             list."
4927msgstr ""
4928
4929#: Mailman/Gui/Privacy.py:219
4930msgid ""
4931"<ul><li><b>Hold</b> -- this holds the message for approval\n"
4932"             by the list moderators.\n"
4933"\n"
4934"             <p><li><b>Reject</b> -- this automatically rejects the message "
4935"by\n"
4936"             sending a bounce notice to the post's author.  The text of the\n"
4937"             bounce notice can be <a\n"
4938"             href=\"?VARHELP=privacy/sender/member_moderation_notice\"\n"
4939"             >configured by you</a>.\n"
4940"\n"
4941"             <p><li><b>Discard</b> -- this simply discards the message, "
4942"with\n"
4943"             no notice sent to the post's author.\n"
4944"             </ul>"
4945msgstr ""
4946
4947#: Mailman/Gui/Privacy.py:233
4948msgid ""
4949"Text to include in any\n"
4950"             <a href=\"?VARHELP/privacy/sender/member_moderation_action\"\n"
4951"             >rejection notice</a> to\n"
4952"             be sent to moderated members who post to this list."
4953msgstr ""
4954
4955#: Mailman/Gui/Privacy.py:238
4956msgid "Non-member filters"
4957msgstr ""
4958
4959#: Mailman/Gui/Privacy.py:241
4960msgid ""
4961"List of non-member addresses whose postings should be\n"
4962"             automatically accepted."
4963msgstr ""
4964
4965#: Mailman/Gui/Privacy.py:244
4966msgid ""
4967"Postings from any of these non-members will be automatically\n"
4968"             accepted with no further moderation applied.  Add member\n"
4969"             addresses one per line; start the line with a ^ character to\n"
4970"             designate a regular expression match."
4971msgstr ""
4972
4973#: Mailman/Gui/Privacy.py:250
4974msgid ""
4975"List of non-member addresses whose postings will be\n"
4976"             immediately held for moderation."
4977msgstr ""
4978
4979#: Mailman/Gui/Privacy.py:253
4980msgid ""
4981"Postings from any of these non-members will be immediately\n"
4982"             and automatically held for moderation by the list moderators.\n"
4983"             The sender will receive a notification message which will "
4984"allow\n"
4985"             them to cancel their held message.  Add member addresses one "
4986"per\n"
4987"             line; start the line with a ^ character to designate a regular\n"
4988"             expression match."
4989msgstr ""
4990
4991#: Mailman/Gui/Privacy.py:261
4992msgid ""
4993"List of non-member addresses whose postings will be\n"
4994"             automatically rejected."
4995msgstr ""
4996
4997#: Mailman/Gui/Privacy.py:264
4998msgid ""
4999"Postings from any of these non-members will be automatically\n"
5000"             rejected.  In other words, their messages will be bounced back "
5001"to\n"
5002"             the sender with a notification of automatic rejection.  This\n"
5003"             option is not appropriate for known spam senders; their "
5004"messages\n"
5005"             should be\n"
5006"             <a href=\"?VARHELP=privacy/sender/discard_these_nonmembers\"\n"
5007"             >automatically discarded</a>.\n"
5008"\n"
5009"             <p>Add member addresses one per line; start the line with a ^\n"
5010"             character to designate a regular expression match."
5011msgstr ""
5012
5013#: Mailman/Gui/Privacy.py:276
5014msgid ""
5015"List of non-member addresses whose postings will be\n"
5016"             automatically discarded."
5017msgstr ""
5018
5019#: Mailman/Gui/Privacy.py:279
5020msgid ""
5021"Postings from any of these non-members will be automatically\n"
5022"             discarded.  That is, the message will be thrown away with no\n"
5023"             further processing or notification.  The sender will not "
5024"receive\n"
5025"             a notification or a bounce, however the list moderators can\n"
5026"             optionally <a href=\"?VARHELP=privacy/sender/"
5027"forward_auto_discards\"\n"
5028"             >receive copies of auto-discarded messages.</a>.\n"
5029"\n"
5030"             <p>Add member addresses one per line; start the line with a ^\n"
5031"             character to designate a regular expression match."
5032msgstr ""
5033
5034#: Mailman/Gui/Privacy.py:291
5035msgid ""
5036"Action to take for postings from non-members for which no\n"
5037"             explicit action is defined."
5038msgstr ""
5039
5040#: Mailman/Gui/Privacy.py:294
5041msgid ""
5042"When a post from a non-member is received, the message's\n"
5043"             sender is matched against the list of explicitly\n"
5044"             <a href=\"?VARHELP=privacy/sender/accept_these_nonmembers\"\n"
5045"             >accepted</a>,\n"
5046"             <a href=\"?VARHELP=privacy/sender/hold_these_nonmembers\">held</"
5047"a>,\n"
5048"             <a href=\"?VARHELP=privacy/sender/reject_these_nonmembers\"\n"
5049"             >rejected</a> (bounced), and\n"
5050"             <a href=\"?VARHELP=privacy/sender/discard_these_nonmembers\"\n"
5051"             >discarded</a> addresses.  If no match is found, then this "
5052"action\n"
5053"             is taken."
5054msgstr ""
5055
5056#: Mailman/Gui/Privacy.py:306
5057msgid ""
5058"Should messages from non-members, which are automatically\n"
5059"             discarded, be forwarded to the list moderator?"
5060msgstr ""
5061
5062#: Mailman/Gui/Privacy.py:310
5063msgid ""
5064"Text to include in any rejection notice to be sent to\n"
5065"             non-members who post to this list. This notice can include\n"
5066"             the list's owner address by %%(listowner)s and replaces the\n"
5067"             internally crafted default message."
5068msgstr ""
5069
5070#: Mailman/Gui/Privacy.py:318
5071msgid ""
5072"This section allows you to configure various filters based on\n"
5073"            the recipient of the message."
5074msgstr ""
5075
5076#: Mailman/Gui/Privacy.py:321
5077msgid "Recipient filters"
5078msgstr ""
5079
5080#: Mailman/Gui/Privacy.py:325
5081msgid ""
5082"Must posts have list named in destination (to, cc) field\n"
5083"             (or be among the acceptable alias names, specified below)?"
5084msgstr ""
5085
5086#: Mailman/Gui/Privacy.py:328
5087msgid ""
5088"Many (in fact, most) spams do not explicitly name their\n"
5089"             myriad destinations in the explicit destination addresses - in\n"
5090"             fact often the To: field has a totally bogus address for\n"
5091"             obfuscation.  The constraint applies only to the stuff in the\n"
5092"             address before the '@' sign, but still catches all such spams.\n"
5093"\n"
5094"             <p>The cost is that the list will not accept unhindered any\n"
5095"             postings relayed from other addresses, unless\n"
5096"\n"
5097"             <ol>\n"
5098"                 <li>The relaying address has the same name, or\n"
5099"\n"
5100"                 <li>The relaying address name is included on the options "
5101"that\n"
5102"                 specifies acceptable aliases for the list.\n"
5103"\n"
5104"             </ol>"
5105msgstr ""
5106
5107#: Mailman/Gui/Privacy.py:346
5108msgid ""
5109"Alias names (regexps) which qualify as explicit to or cc\n"
5110"             destination names for this list."
5111msgstr ""
5112
5113#: Mailman/Gui/Privacy.py:349
5114msgid ""
5115"Alternate addresses that are acceptable when\n"
5116"             `require_explicit_destination' is enabled.  This option takes "
5117"a\n"
5118"             list of regular expressions, one per line, which is matched\n"
5119"             against every recipient address in the message.  The matching "
5120"is\n"
5121"             performed with Python's re.match() function, meaning they are\n"
5122"             anchored to the start of the string.\n"
5123"             \n"
5124"             <p>For backwards compatibility with Mailman 1.1, if the regexp\n"
5125"             does not contain an `@', then the pattern is matched against "
5126"just\n"
5127"             the local part of the recipient address.  If that match fails, "
5128"or\n"
5129"             if the pattern does contain an `@', then the pattern is "
5130"matched\n"
5131"             against the entire recipient address.\n"
5132"             \n"
5133"             <p>Matching against the local part is deprecated; in a future\n"
5134"             release, the pattern will always be matched against the entire\n"
5135"             recipient address."
5136msgstr ""
5137
5138#: Mailman/Gui/Privacy.py:367
5139msgid "Ceiling on acceptable number of recipients for a posting."
5140msgstr ""
5141
5142#: Mailman/Gui/Privacy.py:369
5143msgid ""
5144"If a posting has this number, or more, of recipients, it is\n"
5145"             held for admin approval.  Use 0 for no ceiling."
5146msgstr ""
5147
5148#: Mailman/Gui/Privacy.py:374
5149msgid ""
5150"This section allows you to configure various anti-spam\n"
5151"            filters posting filters, which can help reduce the amount of "
5152"spam\n"
5153"            your list members end up receiving.\n"
5154"            "
5155msgstr ""
5156
5157#: Mailman/Gui/Privacy.py:379
5158msgid "Header filters"
5159msgstr ""
5160
5161#: Mailman/Gui/Privacy.py:382
5162msgid "Filter rules to match against the headers of a message."
5163msgstr ""
5164
5165#: Mailman/Gui/Privacy.py:384
5166msgid ""
5167"Each header filter rule has two parts, a list of regular\n"
5168"             expressions, one per line, and an action to take.  Mailman\n"
5169"             matches the message's headers against every regular expression "
5170"in\n"
5171"             the rule and if any match, the message is rejected, held, or\n"
5172"             discarded based on the action you specify.  Use <em>Defer</em> "
5173"to\n"
5174"             temporarily disable a rule.\n"
5175"\n"
5176"             You can have more than one filter rule for your list.  In that\n"
5177"             case, each rule is matched in turn, with processing stopped "
5178"after\n"
5179"             the first match.\n"
5180"\n"
5181"             Note that headers are collected from all the attachments \n"
5182"             (except for the mailman administrivia message) and\n"
5183"             matched against the regular expressions. With this feature,\n"
5184"             you can effectively sort out messages with dangerous file\n"
5185"             types or file name extensions."
5186msgstr ""
5187
5188#: Mailman/Gui/Privacy.py:401
5189msgid "Legacy anti-spam filters"
5190msgstr ""
5191
5192#: Mailman/Gui/Privacy.py:404
5193msgid "Hold posts with header value matching a specified regexp."
5194msgstr ""
5195
5196#: Mailman/Gui/Privacy.py:405
5197msgid ""
5198"Use this option to prohibit posts according to specific\n"
5199"             header values.  The target value is a regular-expression for\n"
5200"             matching against the specified header.  The match is done\n"
5201"             disregarding letter case.  Lines beginning with '#' are "
5202"ignored\n"
5203"             as comments.\n"
5204"\n"
5205"             <p>For example:<pre>to: .*@public.com </pre> says to hold all\n"
5206"             postings with a <em>To:</em> mail header containing '@public."
5207"com'\n"
5208"             anywhere among the addresses.\n"
5209"\n"
5210"             <p>Note that leading whitespace is trimmed from the regexp.  "
5211"This\n"
5212"             can be circumvented in a number of ways, e.g. by escaping or\n"
5213"             bracketing it."
5214msgstr ""
5215
5216#: Mailman/Gui/Privacy.py:485
5217msgid ""
5218"Header filter rules require a pattern.\n"
5219"                Incomplete filter rules will be ignored."
5220msgstr ""
5221
5222#: Mailman/Gui/Privacy.py:493
5223msgid ""
5224"The header filter rule pattern\n"
5225"                '%(safepattern)s' is not a legal regular expression.  This\n"
5226"                rule will be ignored."
5227msgstr ""
5228
5229#: Mailman/Gui/Topics.py:36
5230msgid "Topics"
5231msgstr ""
5232
5233#: Mailman/Gui/Topics.py:44
5234msgid "List topic keywords"
5235msgstr ""
5236
5237#: Mailman/Gui/Topics.py:46
5238msgid "Disabled"
5239msgstr ""
5240
5241#: Mailman/Gui/Topics.py:46
5242msgid "Enabled"
5243msgstr ""
5244
5245#: Mailman/Gui/Topics.py:47
5246msgid "Should the topic filter be enabled or disabled?"
5247msgstr ""
5248
5249#: Mailman/Gui/Topics.py:49
5250msgid ""
5251"The topic filter categorizes each incoming email message\n"
5252"             according to <a\n"
5253"            href=\"http://www.python.org/doc/current/lib/module-re.html"
5254"\">regular\n"
5255"             expression filters</a> you specify below.  If the message's\n"
5256"             <code>Subject:</code> or <code>Keywords:</code> header contains "
5257"a\n"
5258"             match against a topic filter, the message is logically placed\n"
5259"             into a topic <em>bucket</em>.  Each user can then choose to "
5260"only\n"
5261"             receive messages from the mailing list for a particular topic\n"
5262"             bucket (or buckets).  Any message not categorized in a topic\n"
5263"             bucket registered with the user is not delivered to the list.\n"
5264"\n"
5265"             <p>Note that this feature only works with regular delivery, "
5266"not\n"
5267"             digest delivery.\n"
5268"\n"
5269"             <p>The body of the message can also be optionally scanned for\n"
5270"             <code>Subject:</code> and <code>Keywords:</code> headers, as\n"
5271"             specified by the <a\n"
5272"       href=\"?VARHELP=topics/topics_bodylines_limit"
5273"\">topics_bodylines_limit</a>\n"
5274"             configuration variable."
5275msgstr ""
5276
5277#: Mailman/Gui/Topics.py:70
5278msgid "How many body lines should the topic matcher scan?"
5279msgstr ""
5280
5281#: Mailman/Gui/Topics.py:72
5282msgid ""
5283"The topic matcher will scan this many lines of the message\n"
5284"             body looking for topic keyword matches.  Body scanning stops "
5285"when\n"
5286"             either this many lines have been looked at, or a non-header-"
5287"like\n"
5288"             body line is encountered.  By setting this value to zero, no "
5289"body\n"
5290"             lines will be scanned (i.e. only the <code>Keywords:</code> "
5291"and\n"
5292"             <code>Subject:</code> headers will be scanned).  By setting "
5293"this\n"
5294"             value to a negative number, then all body lines will be "
5295"scanned\n"
5296"             until a non-header-like line is encountered.\n"
5297"             "
5298msgstr ""
5299
5300#: Mailman/Gui/Topics.py:83
5301msgid "Topic keywords, one per line, to match against each message."
5302msgstr ""
5303
5304#: Mailman/Gui/Topics.py:85
5305msgid ""
5306"Each topic keyword is actually a regular expression, which is\n"
5307"             matched against certain parts of a mail message, specifically "
5308"the\n"
5309"             <code>Keywords:</code> and <code>Subject:</code> message "
5310"headers.\n"
5311"             Note that the first few lines of the body of the message can "
5312"also\n"
5313"             contain a <code>Keywords:</code> and <code>Subject:</code>\n"
5314"             \"header\" on which matching is also performed."
5315msgstr ""
5316
5317#: Mailman/Gui/Topics.py:123
5318msgid ""
5319"Topic specifications require both a name and\n"
5320"                a pattern.  Incomplete topics will be ignored."
5321msgstr ""
5322
5323#: Mailman/Gui/Topics.py:132
5324msgid ""
5325"The topic pattern '%(safepattern)s' is not a\n"
5326"                legal regular expression.  It will be discarded."
5327msgstr ""
5328
5329#: Mailman/Gui/Usenet.py:25
5330msgid "Mail&lt;-&gt;News&nbsp;gateways"
5331msgstr ""
5332
5333#: Mailman/Gui/Usenet.py:35
5334msgid "Mail-to-News and News-to-Mail gateway services."
5335msgstr ""
5336
5337#: Mailman/Gui/Usenet.py:37
5338msgid "News server settings"
5339msgstr ""
5340
5341#: Mailman/Gui/Usenet.py:40
5342msgid "The hostname of the machine your news server is running on."
5343msgstr ""
5344
5345#: Mailman/Gui/Usenet.py:41
5346msgid ""
5347"This value may be either the name of your news server, or\n"
5348"             optionally of the format name:port, where port is a port "
5349"number.\n"
5350"\n"
5351"             The news server is not part of Mailman proper.  You have to\n"
5352"             already have access to an NNTP server, and that NNTP server "
5353"must\n"
5354"             recognize the machine this mailing list runs on as a machine\n"
5355"             capable of reading and posting news."
5356msgstr ""
5357
5358#: Mailman/Gui/Usenet.py:50
5359msgid "The name of the Usenet group to gateway to and/or from."
5360msgstr ""
5361
5362#: Mailman/Gui/Usenet.py:53
5363msgid ""
5364"Should new posts to the mailing list be sent to the\n"
5365"             newsgroup?"
5366msgstr ""
5367
5368#: Mailman/Gui/Usenet.py:57
5369msgid ""
5370"Should new posts to the newsgroup be sent to the mailing\n"
5371"             list?"
5372msgstr ""
5373
5374#: Mailman/Gui/Usenet.py:60
5375msgid "Forwarding options"
5376msgstr ""
5377
5378#: Mailman/Gui/Usenet.py:63
5379msgid "Moderated"
5380msgstr ""
5381
5382#: Mailman/Gui/Usenet.py:63
5383msgid "Open list, moderated group"
5384msgstr ""
5385
5386#: Mailman/Gui/Usenet.py:66
5387msgid "The moderation policy of the newsgroup."
5388msgstr ""
5389
5390#: Mailman/Gui/Usenet.py:68
5391msgid ""
5392"This setting determines the moderation policy of the\n"
5393"             newsgroup and its interaction with the moderation policy of "
5394"the\n"
5395"             mailing list.  This only applies to the newsgroup that you are\n"
5396"             gatewaying <em>to</em>, so if you are only gatewaying from\n"
5397"             Usenet, or the newsgroup you are gatewaying to is not "
5398"moderated,\n"
5399"             set this option to <em>None</em>.\n"
5400"\n"
5401"             <p>If the newsgroup is moderated, you can set this mailing "
5402"list\n"
5403"             up to be the moderation address for the newsgroup.  By "
5404"selecting\n"
5405"             <em>Moderated</em>, an additional posting hold will be placed "
5406"in\n"
5407"             the approval process.  All messages posted to the mailing list\n"
5408"             will have to be approved before being sent on to the "
5409"newsgroup,\n"
5410"             or to the mailing list membership.\n"
5411"\n"
5412"             <p><em>Note that if the message has an <tt>Approved</tt> "
5413"header\n"
5414"             with the list's administrative password in it, this hold test\n"
5415"             will be bypassed, allowing privileged posters to send messages\n"
5416"             directly to the list and the newsgroup.</em>\n"
5417"\n"
5418"             <p>Finally, if the newsgroup is moderated, but you want to "
5419"have\n"
5420"             an open posting policy anyway, you should select <em>Open "
5421"list,\n"
5422"             moderated group</em>.  The effect of this is to use the normal\n"
5423"             Mailman moderation facilities, but to add an <tt>Approved</tt>\n"
5424"             header to all messages that are gatewayed to Usenet."
5425msgstr ""
5426
5427#: Mailman/Gui/Usenet.py:94
5428msgid "Prefix <tt>Subject:</tt> headers on postings gated to news?"
5429msgstr ""
5430
5431#: Mailman/Gui/Usenet.py:95
5432msgid ""
5433"Mailman prefixes <tt>Subject:</tt> headers with\n"
5434"             <a href=\"?VARHELP=general/subject_prefix\">text you can\n"
5435"             customize</a> and normally, this prefix shows up in messages\n"
5436"             gatewayed to Usenet.  You can set this option to <em>No</em> "
5437"to\n"
5438"             disable the prefix on gated messages.  Of course, if you turn "
5439"off\n"
5440"             normal <tt>Subject:</tt> prefixes, they won't be prefixed for\n"
5441"             gated messages either."
5442msgstr ""
5443
5444#: Mailman/Gui/Usenet.py:103
5445msgid "Mass catch up"
5446msgstr ""
5447
5448#: Mailman/Gui/Usenet.py:106
5449msgid "Should Mailman perform a <em>catchup</em> on the newsgroup?"
5450msgstr ""
5451
5452#: Mailman/Gui/Usenet.py:107
5453msgid ""
5454"When you tell Mailman to perform a catchup on the newsgroup,\n"
5455"             this means that you want to start gating messages to the "
5456"mailing\n"
5457"             list with the next new message found.  All earlier messages on\n"
5458"             the newsgroup will be ignored.  This is as if you were reading\n"
5459"             the newsgroup yourself, and you marked all current messages as\n"
5460"             <em>read</em>.  By catching up, your mailing list members will\n"
5461"             not see any of the earlier messages."
5462msgstr ""
5463
5464#: Mailman/Gui/Usenet.py:121
5465msgid "Mass catchup completed"
5466msgstr ""
5467
5468#: Mailman/Gui/Usenet.py:133
5469msgid ""
5470"You cannot enable gatewaying unless both the\n"
5471"                <a href=\"?VARHELP=gateway/nntp_host\">news server field</a> "
5472"and\n"
5473"                the <a href=\"?VARHELP=gateway/linked_newsgroup\">linked\n"
5474"                newsgroup</a> fields are filled in."
5475msgstr ""
5476
5477#: Mailman/HTMLFormatter.py:47
5478msgid "%(listinfo_link)s list run by %(owner_link)s"
5479msgstr ""
5480
5481#: Mailman/HTMLFormatter.py:55
5482msgid "%(realname)s administrative interface"
5483msgstr ""
5484
5485#: Mailman/HTMLFormatter.py:56
5486msgid " (requires authorization)"
5487msgstr ""
5488
5489#: Mailman/HTMLFormatter.py:59
5490msgid "Overview of all %(hostname)s mailing lists"
5491msgstr ""
5492
5493#: Mailman/HTMLFormatter.py:80
5494msgid "<em>(1 private member not shown)</em>"
5495msgstr ""
5496
5497#: Mailman/HTMLFormatter.py:82
5498msgid "<em>(%(num_concealed)d private members not shown)</em>"
5499msgstr ""
5500
5501#: Mailman/HTMLFormatter.py:138
5502msgid "; it was disabled by you"
5503msgstr ""
5504
5505#: Mailman/HTMLFormatter.py:140
5506msgid "; it was disabled by the list administrator"
5507msgstr ""
5508
5509#: Mailman/HTMLFormatter.py:144
5510msgid ""
5511"; it was disabled due to excessive bounces.  The\n"
5512"            last bounce was received on %(date)s"
5513msgstr ""
5514
5515#: Mailman/HTMLFormatter.py:147
5516msgid "; it was disabled for unknown reasons"
5517msgstr ""
5518
5519#: Mailman/HTMLFormatter.py:149
5520msgid "Note: your list delivery is currently disabled%(reason)s."
5521msgstr ""
5522
5523#: Mailman/HTMLFormatter.py:152
5524msgid "Mail delivery"
5525msgstr ""
5526
5527#: Mailman/HTMLFormatter.py:154 Mailman/HTMLFormatter.py:299
5528msgid "the list administrator"
5529msgstr ""
5530
5531#: Mailman/HTMLFormatter.py:155
5532msgid ""
5533"<p>%(note)s\n"
5534"\n"
5535"            <p>You may have disabled list delivery intentionally,\n"
5536"            or it may have been triggered by bounces from your email\n"
5537"            address.  In either case, to re-enable delivery, change the\n"
5538"            %(link)s option below.  Contact %(mailto)s if you have any\n"
5539"            questions or need assistance."
5540msgstr ""
5541
5542#: Mailman/HTMLFormatter.py:167
5543msgid ""
5544"<p>We have received some recent bounces from your\n"
5545"            address.  Your current <em>bounce score</em> is %(score)s out of "
5546"a\n"
5547"            maximum of %(total)s.  Please double check that your subscribed\n"
5548"            address is correct and that there are no problems with delivery "
5549"to\n"
5550"            this address.  Your bounce score will be automatically reset if\n"
5551"            the problems are corrected soon."
5552msgstr ""
5553
5554#: Mailman/HTMLFormatter.py:179
5555msgid ""
5556"(Note - you are subscribing to a list of mailing lists, so the %(type)s "
5557"notice will be sent to the admin address for your membership, %(addr)s.)<p>"
5558msgstr ""
5559
5560#: Mailman/HTMLFormatter.py:189
5561msgid ""
5562"You will be sent email requesting confirmation, to\n"
5563"            prevent others from gratuitously subscribing you."
5564msgstr ""
5565
5566#: Mailman/HTMLFormatter.py:192
5567msgid ""
5568"This is a closed list, which means your subscription\n"
5569"            will be held for approval.  You will be notified of the list\n"
5570"            moderator's decision by email."
5571msgstr ""
5572
5573#: Mailman/HTMLFormatter.py:195 Mailman/HTMLFormatter.py:202
5574msgid "also "
5575msgstr ""
5576
5577#: Mailman/HTMLFormatter.py:197
5578msgid ""
5579"You will be sent email requesting confirmation, to\n"
5580"            prevent others from gratuitously subscribing you.  Once\n"
5581"            confirmation is received, your request will be held for "
5582"approval\n"
5583"            by the list moderator.  You will be notified of the moderator's\n"
5584"            decision by email."
5585msgstr ""
5586
5587#: Mailman/HTMLFormatter.py:206
5588msgid ""
5589"This is %(also)sa private list, which means that the\n"
5590"            list of members is not available to non-members."
5591msgstr ""
5592
5593#: Mailman/HTMLFormatter.py:209
5594msgid ""
5595"This is %(also)sa hidden list, which means that the\n"
5596"            list of members is available only to the list administrator."
5597msgstr ""
5598
5599#: Mailman/HTMLFormatter.py:212
5600msgid ""
5601"This is %(also)sa public list, which means that the\n"
5602"            list of members list is available to everyone."
5603msgstr ""
5604
5605#: Mailman/HTMLFormatter.py:215
5606msgid ""
5607" (but we obscure the addresses so they are not\n"
5608"                easily recognizable by spammers)."
5609msgstr ""
5610
5611#: Mailman/HTMLFormatter.py:220
5612msgid ""
5613"<p>(Note that this is an umbrella list, intended to\n"
5614"            have only other mailing lists as members.  Among other things,\n"
5615"            this means that your confirmation request will be sent to the\n"
5616"            `%(sfx)s' account for your address.)"
5617msgstr ""
5618
5619#: Mailman/HTMLFormatter.py:249
5620msgid "<b><i>either</i></b> "
5621msgstr ""
5622
5623#: Mailman/HTMLFormatter.py:254
5624msgid ""
5625"To unsubscribe from %(realname)s, get a password reminder,\n"
5626"        or change your subscription options %(either)senter your "
5627"subscription\n"
5628"        email address:\n"
5629"        <p><center> "
5630msgstr ""
5631
5632#: Mailman/HTMLFormatter.py:261
5633msgid "Unsubscribe or edit options"
5634msgstr ""
5635
5636#: Mailman/HTMLFormatter.py:265
5637msgid ""
5638"<p>... <b><i>or</i></b> select your entry from\n"
5639"                      the subscribers list (see above)."
5640msgstr ""
5641
5642#: Mailman/HTMLFormatter.py:267
5643msgid ""
5644" If you leave the field blank, you will be prompted for\n"
5645"        your email address"
5646msgstr ""
5647
5648#: Mailman/HTMLFormatter.py:275
5649msgid ""
5650"(<i>%(which)s is only available to the list\n"
5651"                members.</i>)"
5652msgstr ""
5653
5654#: Mailman/HTMLFormatter.py:279
5655msgid ""
5656"(<i>%(which)s is only available to the list\n"
5657"            administrator.</i>)"
5658msgstr ""
5659
5660#: Mailman/HTMLFormatter.py:289
5661msgid "Click here for the list of "
5662msgstr ""
5663
5664#: Mailman/HTMLFormatter.py:291
5665msgid " subscribers: "
5666msgstr ""
5667
5668#: Mailman/HTMLFormatter.py:293
5669msgid "Visit Subscriber list"
5670msgstr ""
5671
5672#: Mailman/HTMLFormatter.py:296
5673msgid "members"
5674msgstr ""
5675
5676#: Mailman/HTMLFormatter.py:297
5677msgid "Address:"
5678msgstr ""
5679
5680#: Mailman/HTMLFormatter.py:300
5681msgid "Admin address:"
5682msgstr ""
5683
5684#: Mailman/HTMLFormatter.py:303
5685msgid "The subscribers list"
5686msgstr ""
5687
5688#: Mailman/HTMLFormatter.py:305
5689msgid " <p>Enter your "
5690msgstr ""
5691
5692#: Mailman/HTMLFormatter.py:307
5693msgid " and password to visit  the subscribers list: <p><center> "
5694msgstr ""
5695
5696#: Mailman/HTMLFormatter.py:312
5697msgid "Password: "
5698msgstr ""
5699
5700#: Mailman/HTMLFormatter.py:316
5701msgid "Visit Subscriber List"
5702msgstr ""
5703
5704#: Mailman/HTMLFormatter.py:346
5705msgid "Once a month, your password will be emailed to you as a reminder."
5706msgstr ""
5707
5708#: Mailman/HTMLFormatter.py:392
5709msgid "The current archive"
5710msgstr ""
5711
5712#: Mailman/Handlers/Acknowledge.py:59
5713msgid "%(realname)s post acknowledgement"
5714msgstr ""
5715
5716#: Mailman/Handlers/CalcRecips.py:68
5717msgid ""
5718"Your urgent message to the %(realname)s mailing list was not authorized for\n"
5719"delivery.  The original message as received by Mailman is attached.\n"
5720msgstr ""
5721
5722#: Mailman/Handlers/Emergency.py:29
5723msgid "Emergency hold on all list traffic is in effect"
5724msgstr ""
5725
5726#: Mailman/Handlers/Emergency.py:30 Mailman/Handlers/Hold.py:57
5727msgid "Your message was deemed inappropriate by the moderator."
5728msgstr ""
5729
5730#: Mailman/Handlers/Hold.py:52
5731msgid "Sender is explicitly forbidden"
5732msgstr ""
5733
5734#: Mailman/Handlers/Hold.py:53
5735msgid "You are forbidden from posting messages to this list."
5736msgstr ""
5737
5738#: Mailman/Handlers/Hold.py:56
5739msgid "Post to moderated list"
5740msgstr ""
5741
5742#: Mailman/Handlers/Hold.py:60
5743msgid "Post by non-member to a members-only list"
5744msgstr ""
5745
5746#: Mailman/Handlers/Hold.py:61
5747msgid "Non-members are not allowed to post messages to this list."
5748msgstr ""
5749
5750#: Mailman/Handlers/Hold.py:64
5751msgid "Posting to a restricted list by sender requires approval"
5752msgstr ""
5753
5754#: Mailman/Handlers/Hold.py:65
5755msgid "This list is restricted; your message was not approved."
5756msgstr ""
5757
5758#: Mailman/Handlers/Hold.py:68
5759msgid "Too many recipients to the message"
5760msgstr ""
5761
5762#: Mailman/Handlers/Hold.py:69
5763msgid "Please trim the recipient list; it is too long."
5764msgstr ""
5765
5766#: Mailman/Handlers/Hold.py:72
5767msgid "Message has implicit destination"
5768msgstr ""
5769
5770#: Mailman/Handlers/Hold.py:73
5771msgid ""
5772"Blind carbon copies or other implicit destinations are\n"
5773"not allowed.  Try reposting your message by explicitly including the list\n"
5774"address in the To: or Cc: fields."
5775msgstr ""
5776
5777#: Mailman/Handlers/Hold.py:78
5778msgid "Message may contain administrivia"
5779msgstr ""
5780
5781#: Mailman/Handlers/Hold.py:83
5782msgid ""
5783"Please do *not* post administrative requests to the mailing\n"
5784"list.  If you wish to subscribe, visit %(listurl)s or send a message with "
5785"the\n"
5786"word `help' in it to the request address, %(request)s, for further\n"
5787"instructions."
5788msgstr ""
5789
5790#: Mailman/Handlers/Hold.py:89
5791msgid "Message has a suspicious header"
5792msgstr ""
5793
5794#: Mailman/Handlers/Hold.py:90
5795msgid "Your message had a suspicious header."
5796msgstr ""
5797
5798#: Mailman/Handlers/Hold.py:100
5799msgid ""
5800"Message body is too big: %(size)d bytes with a limit of\n"
5801"%(limit)d KB"
5802msgstr ""
5803
5804#: Mailman/Handlers/Hold.py:105
5805msgid ""
5806"Your message was too big; please trim it to less than\n"
5807"%(kb)d KB in size."
5808msgstr ""
5809
5810#: Mailman/Handlers/Hold.py:109
5811msgid "Posting to a moderated newsgroup"
5812msgstr ""
5813
5814#: Mailman/Handlers/Hold.py:244
5815msgid "Your message to %(listname)s awaits moderator approval"
5816msgstr ""
5817
5818#: Mailman/Handlers/Hold.py:263
5819msgid "%(listname)s post from %(sender)s requires approval"
5820msgstr ""
5821
5822#: Mailman/Handlers/Hold.py:270
5823msgid ""
5824"If you reply to this message, keeping the Subject: header intact, Mailman "
5825"will\n"
5826"discard the held message.  Do this if the message is spam.  If you reply to\n"
5827"this message and include an Approved: header with the list password in it, "
5828"the\n"
5829"message will be approved for posting to the list.  The Approved: header can\n"
5830"also appear in the first line of the body of the reply."
5831msgstr ""
5832
5833#: Mailman/Handlers/MimeDel.py:59
5834msgid "The message's content type was explicitly disallowed"
5835msgstr ""
5836
5837#: Mailman/Handlers/MimeDel.py:64
5838msgid "The message's content type was not explicitly allowed"
5839msgstr ""
5840
5841#: Mailman/Handlers/MimeDel.py:72
5842msgid "The message's file extension was explicitly disallowed"
5843msgstr ""
5844
5845#: Mailman/Handlers/MimeDel.py:75
5846msgid "The message's file extension was not explicitly allowed"
5847msgstr ""
5848
5849#: Mailman/Handlers/MimeDel.py:87
5850msgid "After content filtering, the message was empty"
5851msgstr ""
5852
5853#: Mailman/Handlers/MimeDel.py:232
5854msgid ""
5855"The attached message matched the %(listname)s mailing list's content "
5856"filtering\n"
5857"rules and was prevented from being forwarded on to the list membership.  "
5858"You\n"
5859"are receiving the only remaining copy of the discarded message.\n"
5860"\n"
5861msgstr ""
5862
5863#: Mailman/Handlers/MimeDel.py:238
5864msgid "Content filtered message notification"
5865msgstr ""
5866
5867#: Mailman/Handlers/Moderate.py:142
5868msgid ""
5869"You are not allowed to post to this mailing list, and your message has been\n"
5870"automatically rejected.  If you think that your messages are being rejected "
5871"in\n"
5872"error, contact the mailing list owner at %(listowner)s."
5873msgstr ""
5874
5875#: Mailman/Handlers/Moderate.py:158
5876msgid "Auto-discard notification"
5877msgstr ""
5878
5879#: Mailman/Handlers/Moderate.py:161
5880msgid "The attached message has been automatically discarded."
5881msgstr ""
5882
5883#: Mailman/Handlers/Replybot.py:74
5884msgid "Auto-response for your message to the \"%(realname)s\" mailing list"
5885msgstr ""
5886
5887#: Mailman/Handlers/Replybot.py:107
5888msgid "The Mailman Replybot"
5889msgstr ""
5890
5891#: Mailman/Handlers/Scrubber.py:209
5892msgid ""
5893"An embedded and charset-unspecified text was scrubbed...\n"
5894"Name: %(filename)s\n"
5895"Url: %(url)s\n"
5896msgstr ""
5897
5898#: Mailman/Handlers/Scrubber.py:219
5899msgid "HTML attachment scrubbed and removed"
5900msgstr ""
5901
5902#: Mailman/Handlers/Scrubber.py:235 Mailman/Handlers/Scrubber.py:260
5903msgid ""
5904"An HTML attachment was scrubbed...\n"
5905"URL: %(url)s\n"
5906msgstr ""
5907
5908#: Mailman/Handlers/Scrubber.py:272
5909msgid "no subject"
5910msgstr ""
5911
5912#: Mailman/Handlers/Scrubber.py:273
5913msgid "no date"
5914msgstr ""
5915
5916#: Mailman/Handlers/Scrubber.py:274
5917msgid "unknown sender"
5918msgstr ""
5919
5920#: Mailman/Handlers/Scrubber.py:276
5921msgid ""
5922"An embedded message was scrubbed...\n"
5923"From: %(who)s\n"
5924"Subject: %(subject)s\n"
5925"Date: %(date)s\n"
5926"Size: %(size)s\n"
5927"Url: %(url)s\n"
5928msgstr ""
5929
5930#: Mailman/Handlers/Scrubber.py:307
5931msgid ""
5932"A non-text attachment was scrubbed...\n"
5933"Name: %(filename)s\n"
5934"Type: %(ctype)s\n"
5935"Size: %(size)d bytes\n"
5936"Desc: %(desc)s\n"
5937"Url : %(url)s\n"
5938msgstr ""
5939
5940#: Mailman/Handlers/Scrubber.py:342
5941msgid "Skipped content of type %(partctype)s\n"
5942msgstr ""
5943
5944#: Mailman/Handlers/Scrubber.py:382
5945msgid "-------------- next part --------------\n"
5946msgstr ""
5947
5948#: Mailman/Handlers/SpamDetect.py:55
5949msgid "The message headers matched a filter rule"
5950msgstr ""
5951
5952#: Mailman/Handlers/SpamDetect.py:132
5953msgid "Message rejected by filter rule match"
5954msgstr ""
5955
5956#: Mailman/Handlers/ToDigest.py:158
5957msgid "%(realname)s Digest, Vol %(volume)d, Issue %(issue)d"
5958msgstr ""
5959
5960#: Mailman/Handlers/ToDigest.py:204
5961msgid "digest header"
5962msgstr ""
5963
5964#: Mailman/Handlers/ToDigest.py:207
5965msgid "Digest Header"
5966msgstr ""
5967
5968#: Mailman/Handlers/ToDigest.py:220
5969msgid "Today's Topics:\n"
5970msgstr ""
5971
5972#: Mailman/Handlers/ToDigest.py:300
5973msgid "Today's Topics (%(msgcount)d messages)"
5974msgstr ""
5975
5976#: Mailman/Handlers/ToDigest.py:326
5977msgid "[Message discarded by content filter]"
5978msgstr ""
5979
5980#: Mailman/Handlers/ToDigest.py:354
5981msgid "digest footer"
5982msgstr ""
5983
5984#: Mailman/Handlers/ToDigest.py:357
5985msgid "Digest Footer"
5986msgstr ""
5987
5988#: Mailman/Handlers/ToDigest.py:371
5989msgid "End of "
5990msgstr ""
5991
5992#: Mailman/ListAdmin.py:295
5993msgid "Posting of your message titled \"%(subject)s\""
5994msgstr ""
5995
5996#: Mailman/ListAdmin.py:334
5997msgid "Forward of moderated message"
5998msgstr ""
5999
6000#: Mailman/ListAdmin.py:390
6001msgid "New subscription request to list %(realname)s from %(addr)s"
6002msgstr ""
6003
6004#: Mailman/ListAdmin.py:413
6005msgid "Subscription request"
6006msgstr ""
6007
6008#: Mailman/ListAdmin.py:442
6009msgid "New unsubscription request from %(realname)s by %(addr)s"
6010msgstr ""
6011
6012#: Mailman/ListAdmin.py:465
6013msgid "Unsubscription request"
6014msgstr ""
6015
6016#: Mailman/ListAdmin.py:496
6017msgid "Original Message"
6018msgstr ""
6019
6020#: Mailman/ListAdmin.py:499
6021msgid "Request to mailing list %(realname)s rejected"
6022msgstr ""
6023
6024#: Mailman/MTA/Manual.py:66
6025msgid ""
6026"The mailing list `%(listname)s' has been created via the through-the-web\n"
6027"interface.  In order to complete the activation of this mailing list, the\n"
6028"proper /etc/aliases (or equivalent) file must be updated.  The program\n"
6029"`newaliases' may also have to be run.\n"
6030"\n"
6031"Here are the entries for the /etc/aliases file:\n"
6032msgstr ""
6033
6034#: Mailman/MTA/Manual.py:77
6035msgid ""
6036"To finish creating your mailing list, you must edit your /etc/aliases (or\n"
6037"equivalent) file by adding the following lines, and possibly running the\n"
6038"`newaliases' program:\n"
6039msgstr ""
6040
6041#: Mailman/MTA/Manual.py:82
6042msgid "## %(listname)s mailing list"
6043msgstr ""
6044
6045#: Mailman/MTA/Manual.py:99
6046msgid "Mailing list creation request for list %(listname)s"
6047msgstr ""
6048
6049#: Mailman/MTA/Manual.py:113
6050msgid ""
6051"The mailing list `%(listname)s' has been removed via the through-the-web\n"
6052"interface.  In order to complete the de-activation of this mailing list, "
6053"the\n"
6054"appropriate /etc/aliases (or equivalent) file must be updated.  The program\n"
6055"`newaliases' may also have to be run.\n"
6056"\n"
6057"Here are the entries in the /etc/aliases file that should be removed:\n"
6058msgstr ""
6059
6060#: Mailman/MTA/Manual.py:123
6061msgid ""
6062"\n"
6063"To finish removing your mailing list, you must edit your /etc/aliases (or\n"
6064"equivalent) file by removing the following lines, and possibly running the\n"
6065"`newaliases' program:\n"
6066"\n"
6067"## %(listname)s mailing list"
6068msgstr ""
6069
6070#: Mailman/MTA/Manual.py:142
6071msgid "Mailing list removal request for list %(listname)s"
6072msgstr ""
6073
6074#: Mailman/MTA/Postfix.py:306
6075msgid "checking permissions on %(file)s"
6076msgstr ""
6077
6078#: Mailman/MTA/Postfix.py:316
6079msgid "%(file)s permissions must be 066x (got %(octmode)s)"
6080msgstr ""
6081
6082#: Mailman/MTA/Postfix.py:318 Mailman/MTA/Postfix.py:345
6083#: Mailman/MTA/Postfix.py:356 bin/check_perms:123 bin/check_perms:145
6084#: bin/check_perms:155 bin/check_perms:166 bin/check_perms:191
6085#: bin/check_perms:208 bin/check_perms:234 bin/check_perms:257
6086#: bin/check_perms:276 bin/check_perms:290 bin/check_perms:310
6087#: bin/check_perms:347
6088msgid "(fixing)"
6089msgstr ""
6090
6091#: Mailman/MTA/Postfix.py:334
6092msgid "checking ownership of %(dbfile)s"
6093msgstr ""
6094
6095#: Mailman/MTA/Postfix.py:342
6096msgid "%(dbfile)s owned by %(owner)s (must be owned by %(user)s"
6097msgstr ""
6098
6099#: Mailman/MTA/Postfix.py:354
6100msgid "%(dbfile)s permissions must be 066x (got %(octmode)s)"
6101msgstr ""
6102
6103#: Mailman/MailList.py:216
6104msgid "Your confirmation is required to join the %(listname)s mailing list"
6105msgstr ""
6106
6107#: Mailman/MailList.py:227
6108msgid "Your confirmation is required to leave the %(listname)s mailing list"
6109msgstr ""
6110
6111#: Mailman/MailList.py:880 Mailman/MailList.py:1292
6112msgid " from %(remote)s"
6113msgstr ""
6114
6115#: Mailman/MailList.py:913
6116msgid "subscriptions to %(realname)s require moderator approval"
6117msgstr ""
6118
6119#: Mailman/MailList.py:982 bin/add_members:242
6120msgid "%(realname)s subscription notification"
6121msgstr ""
6122
6123#: Mailman/MailList.py:1001
6124msgid "unsubscriptions require moderator approval"
6125msgstr ""
6126
6127#: Mailman/MailList.py:1021
6128msgid "%(realname)s unsubscribe notification"
6129msgstr ""
6130
6131#: Mailman/MailList.py:1201
6132msgid "subscriptions to %(name)s require administrator approval"
6133msgstr ""
6134
6135#: Mailman/MailList.py:1464
6136msgid "Last autoresponse notification for today"
6137msgstr ""
6138
6139#: Mailman/Queue/BounceRunner.py:310
6140msgid ""
6141"The attached message was received as a bounce, but either the bounce format\n"
6142"was not recognized, or no member addresses could be extracted from it.  "
6143"This\n"
6144"mailing list has been configured to send all unrecognized bounce messages "
6145"to\n"
6146"the list administrator(s).\n"
6147"\n"
6148"For more information see:\n"
6149"%(adminurl)s\n"
6150"\n"
6151msgstr ""
6152
6153#: Mailman/Queue/BounceRunner.py:320
6154msgid "Uncaught bounce notification"
6155msgstr ""
6156
6157#: Mailman/Queue/CommandRunner.py:92
6158msgid "Ignoring non-text/plain MIME parts"
6159msgstr ""
6160
6161#: Mailman/Queue/CommandRunner.py:148
6162msgid ""
6163"The results of your email command are provided below.\n"
6164"Attached is your original message.\n"
6165msgstr ""
6166
6167#: Mailman/Queue/CommandRunner.py:153
6168msgid "- Results:"
6169msgstr ""
6170
6171#: Mailman/Queue/CommandRunner.py:159
6172msgid ""
6173"\n"
6174"- Unprocessed:"
6175msgstr ""
6176
6177#: Mailman/Queue/CommandRunner.py:163
6178msgid ""
6179"No commands were found in this message.\n"
6180"To obtain instructions, send a message containing just the word \"help\".\n"
6181msgstr ""
6182
6183#: Mailman/Queue/CommandRunner.py:168
6184msgid ""
6185"\n"
6186"- Ignored:"
6187msgstr ""
6188
6189#: Mailman/Queue/CommandRunner.py:170
6190msgid ""
6191"\n"
6192"- Done.\n"
6193"\n"
6194msgstr ""
6195
6196#: Mailman/Queue/CommandRunner.py:194
6197msgid "The results of your email commands"
6198msgstr ""
6199
6200#: Mailman/htmlformat.py:627
6201msgid "Delivered by Mailman<br>version %(version)s"
6202msgstr ""
6203
6204#: Mailman/htmlformat.py:628
6205msgid "Python Powered"
6206msgstr ""
6207
6208#: Mailman/htmlformat.py:629
6209msgid "Gnu's Not Unix"
6210msgstr ""
6211
6212#: Mailman/i18n.py:98
6213msgid "Mon"
6214msgstr ""
6215
6216#: Mailman/i18n.py:98
6217msgid "Thu"
6218msgstr ""
6219
6220#: Mailman/i18n.py:98
6221msgid "Tue"
6222msgstr ""
6223
6224#: Mailman/i18n.py:98
6225msgid "Wed"
6226msgstr ""
6227
6228#: Mailman/i18n.py:99
6229msgid "Fri"
6230msgstr ""
6231
6232#: Mailman/i18n.py:99
6233msgid "Sat"
6234msgstr ""
6235
6236#: Mailman/i18n.py:99
6237msgid "Sun"
6238msgstr ""
6239
6240#: Mailman/i18n.py:103
6241msgid "Apr"
6242msgstr ""
6243
6244#: Mailman/i18n.py:103
6245msgid "Feb"
6246msgstr ""
6247
6248#: Mailman/i18n.py:103
6249msgid "Jan"
6250msgstr ""
6251
6252#: Mailman/i18n.py:103
6253msgid "Jun"
6254msgstr ""
6255
6256#: Mailman/i18n.py:103
6257msgid "Mar"
6258msgstr ""
6259
6260#: Mailman/i18n.py:104
6261msgid "Aug"
6262msgstr ""
6263
6264#: Mailman/i18n.py:104
6265msgid "Dec"
6266msgstr ""
6267
6268#: Mailman/i18n.py:104
6269msgid "Jul"
6270msgstr ""
6271
6272#: Mailman/i18n.py:104
6273msgid "Nov"
6274msgstr ""
6275
6276#: Mailman/i18n.py:104
6277msgid "Oct"
6278msgstr ""
6279
6280#: Mailman/i18n.py:104
6281msgid "Sep"
6282msgstr ""
6283
6284#: Mailman/i18n.py:107
6285msgid "Server Local Time"
6286msgstr ""
6287
6288#: Mailman/i18n.py:146
6289msgid ""
6290"%(wday)s %(mon)s %(day)2i %(hh)02i:%(mm)02i:%(ss)02i %(tzname)s %(year)04i"
6291msgstr ""
6292
6293#: bin/add_members:26
6294msgid ""
6295"Add members to a list from the command line.\n"
6296"\n"
6297"Usage:\n"
6298"    add_members [options] listname\n"
6299"\n"
6300"Options:\n"
6301"\n"
6302"    --regular-members-file=file\n"
6303"    -r file\n"
6304"        A file containing addresses of the members to be added, one\n"
6305"        address per line.  This list of people become non-digest\n"
6306"        members.  If file is `-', read addresses from stdin.  Note that\n"
6307"        -n/--non-digest-members-file are deprecated synonyms for this "
6308"option.\n"
6309"\n"
6310"    --digest-members-file=file\n"
6311"    -d file\n"
6312"        Similar to above, but these people become digest members.\n"
6313"\n"
6314"    --welcome-msg=<y|n>\n"
6315"    -w <y|n>\n"
6316"        Set whether or not to send the list members a welcome message,\n"
6317"        overriding whatever the list's `send_welcome_msg' setting is.\n"
6318"\n"
6319"    --admin-notify=<y|n>\n"
6320"    -a <y|n>\n"
6321"        Set whether or not to send the list administrators a notification "
6322"on\n"
6323"        the success/failure of these subscriptions, overriding whatever the\n"
6324"        list's `admin_notify_mchanges' setting is.\n"
6325"\n"
6326"    --help\n"
6327"    -h\n"
6328"        Print this help message and exit.\n"
6329"\n"
6330"    listname\n"
6331"        The name of the Mailman list you are adding members to.  It must\n"
6332"        already exist.\n"
6333"\n"
6334"You must supply at least one of -r and -d options.  At most one of the\n"
6335"files can be `-'.\n"
6336msgstr ""
6337
6338#: bin/add_members:137
6339msgid "Already a member: %(member)s"
6340msgstr ""
6341
6342#: bin/add_members:140
6343msgid "Bad/Invalid email address: blank line"
6344msgstr ""
6345
6346#: bin/add_members:142
6347msgid "Bad/Invalid email address: %(member)s"
6348msgstr ""
6349
6350#: bin/add_members:144
6351msgid "Hostile address (illegal characters): %(member)s"
6352msgstr ""
6353
6354#: bin/add_members:146
6355msgid "Subscribed: %(member)s"
6356msgstr ""
6357
6358#: bin/add_members:191
6359msgid "Bad argument to -w/--welcome-msg: %(arg)s"
6360msgstr ""
6361
6362#: bin/add_members:198
6363msgid "Bad argument to -a/--admin-notify: %(arg)s"
6364msgstr ""
6365
6366#: bin/add_members:204
6367msgid "Cannot read both digest and normal members from standard input."
6368msgstr ""
6369
6370#: bin/add_members:210 bin/config_list:109 bin/config_list.orig:105
6371#: bin/find_member:97 bin/inject:90 bin/list_admins:89 bin/list_members:232
6372#: bin/sync_members:222 cron/bumpdigests:86
6373msgid "No such list: %(listname)s"
6374msgstr ""
6375
6376#: bin/add_members:230 bin/change_pw:158 bin/check_db:114 bin/discard:83
6377#: bin/sync_members:244 bin/update:564 cron/bumpdigests:78
6378msgid "Nothing to do."
6379msgstr ""
6380
6381#: bin/arch:19
6382msgid ""
6383"Rebuild a list's archive.\n"
6384"\n"
6385"Use this command to rebuild the archives for a mailing list.  You may want "
6386"to\n"
6387"do this if you edit some messages in an archive, or remove some messages "
6388"from\n"
6389"an archive.\n"
6390"\n"
6391"Usage: %(PROGRAM)s [options] <listname> [<mbox>]\n"
6392"\n"
6393"Where options are:\n"
6394"    -h / --help\n"
6395"        Print this help message and exit.\n"
6396"\n"
6397"    -q / --quiet\n"
6398"        Make the archiver output less verbose.\n"
6399"\n"
6400"    --wipe\n"
6401"        First wipe out the original archive before regenerating.  You "
6402"usually\n"
6403"        want to specify this argument unless you're generating the archive "
6404"in\n"
6405"        chunks.\n"
6406"\n"
6407"    -s N\n"
6408"    --start=N\n"
6409"        Start indexing at article N, where article 0 is the first in the "
6410"mbox.\n"
6411"        Defaults to 0.\n"
6412"\n"
6413"    -e M\n"
6414"    --end=M\n"
6415"        End indexing at article M.  This script is not very efficient with\n"
6416"        respect to memory management, and for large archives, it may not be\n"
6417"        possible to index the mbox entirely.  For that reason, you can "
6418"specify\n"
6419"        the start and end article numbers.\n"
6420"\n"
6421"Where <mbox> is the path to a list's complete mbox archive.  Usually this "
6422"will\n"
6423"be some path in the archives/private directory.  For example:\n"
6424"\n"
6425"%% bin/arch mylist archives/private/mylist.mbox/mylist.mbox\n"
6426"\n"
6427"<mbox> is optional.  If it is missing, it is calculated.\n"
6428msgstr ""
6429
6430#: bin/arch:125
6431msgid "listname is required"
6432msgstr ""
6433
6434#: bin/arch:143 bin/change_pw:106 bin/config_list:256 bin/config_list.orig:242
6435msgid ""
6436"No such list \"%(listname)s\"\n"
6437"%(e)s"
6438msgstr ""
6439
6440#: bin/arch:183
6441msgid "Cannot open mbox file %(mbox)s: %(msg)s"
6442msgstr ""
6443
6444#: bin/b4b5-archfix:19
6445msgid ""
6446"Fix the MM2.1b4 archives.\n"
6447"\n"
6448"Usage: %(PROGRAM)s [options] file ...\n"
6449"\n"
6450"Where options are:\n"
6451"    -h / --help\n"
6452"        Print this help message and exit.\n"
6453"\n"
6454"Only use this to `fix' some archive database files that may have gotten\n"
6455"written in Mailman 2.1b4 with some bogus data.  Use like this from your\n"
6456"$PREFIX directory\n"
6457"\n"
6458"%% %(PROGRAM)s `grep -l _mlist archives/private/*/database/*-article`\n"
6459"\n"
6460"(note the backquotes are required)\n"
6461"\n"
6462"You will need to run `bin/check_perms -f' after running this script.\n"
6463msgstr ""
6464
6465#: bin/change_pw:19
6466msgid ""
6467"Change a list's password.\n"
6468"\n"
6469"Prior to Mailman 2.1, list passwords were kept in crypt'd format -- "
6470"usually.\n"
6471"Some Python installations didn't have the crypt module available, so they'd\n"
6472"fall back to md5.  Then suddenly the Python installation might grow a crypt\n"
6473"module and all list passwords would be broken.\n"
6474"\n"
6475"In Mailman 2.1, all list and site passwords are stored in SHA1 hexdigest\n"
6476"form.  This breaks list passwords for all existing pre-Mailman 2.1 lists, "
6477"and\n"
6478"since those passwords aren't stored anywhere in plain text, they cannot be\n"
6479"retrieved and updated.\n"
6480"\n"
6481"Thus, this script generates new passwords for a list, and optionally sends "
6482"it\n"
6483"to all the owners of the list.\n"
6484"\n"
6485"Usage: change_pw [options]\n"
6486"\n"
6487"Options:\n"
6488"\n"
6489"    --all / -a\n"
6490"        Change the password for all lists.\n"
6491"\n"
6492"    --domain=domain\n"
6493"    -d domain\n"
6494"        Change the password for all lists in the virtual domain `domain'.  "
6495"It\n"
6496"        is okay to give multiple -d options.\n"
6497"\n"
6498"    --listname=listname\n"
6499"    -l listname\n"
6500"        Change the password only for the named list.  It is okay to give\n"
6501"        multiple -l options.\n"
6502"\n"
6503"    --password=newpassword\n"
6504"    -p newpassword\n"
6505"        Use the supplied plain text password `newpassword' as the new "
6506"password\n"
6507"        for any lists that are being changed (as specified by the -a, -d, "
6508"and\n"
6509"        -l options).  If not given, lists will be assigned a randomly\n"
6510"        generated new password.\n"
6511"\n"
6512"    --quiet / -q\n"
6513"        Don't notify list owners of the new password.  You'll have to have\n"
6514"        some other way of letting the list owners know the new password\n"
6515"        (presumably out-of-band).\n"
6516"\n"
6517"    --help / -h\n"
6518"        Print this help message and exit.\n"
6519msgstr ""
6520
6521#: bin/change_pw:144
6522msgid "Bad arguments: %(strargs)s"
6523msgstr ""
6524
6525#: bin/change_pw:148
6526msgid "Empty list passwords are not allowed"
6527msgstr ""
6528
6529#: bin/change_pw:180
6530msgid "New %(listname)s password: %(notifypassword)s"
6531msgstr ""
6532
6533#: bin/change_pw:189
6534msgid "Your new %(listname)s list password"
6535msgstr ""
6536
6537#: bin/change_pw:190
6538msgid ""
6539"The site administrator at %(hostname)s has changed the password for your\n"
6540"mailing list %(listname)s.  It is now\n"
6541"\n"
6542"    %(notifypassword)s\n"
6543"\n"
6544"Please be sure to use this for all future list administration.  You may "
6545"want\n"
6546"to log in now to your list and change the password to something more to "
6547"your\n"
6548"liking.  Visit your list admin page at\n"
6549"\n"
6550"    %(adminurl)s\n"
6551msgstr ""
6552
6553#: bin/check_db:19
6554msgid ""
6555"Check a list's config database file for integrity.\n"
6556"\n"
6557"All of the following files are checked:\n"
6558"\n"
6559"    config.pck\n"
6560"    config.pck.last\n"
6561"    config.db\n"
6562"    config.db.last\n"
6563"    config.safety\n"
6564"\n"
6565"It's okay if any of these are missing.  config.pck and config.pck.last are\n"
6566"pickled versions of the config database file for 2.1a3 and beyond.  config."
6567"db\n"
6568"and config.db.last are used in all earlier versions, and these are Python\n"
6569"marshals.  config.safety is a pickle written by 2.1a3 and beyond when the\n"
6570"primary config.pck file could not be read.\n"
6571"\n"
6572"Usage: %(PROGRAM)s [options] [listname [listname ...]]\n"
6573"\n"
6574"Options:\n"
6575"\n"
6576"    --all / -a\n"
6577"        Check the databases for all lists.  Otherwise only the lists named "
6578"on\n"
6579"        the command line are checked.\n"
6580"\n"
6581"    --verbose / -v\n"
6582"        Verbose output.  The state of every tested file is printed.\n"
6583"        Otherwise only corrupt files are displayed.\n"
6584"\n"
6585"    --help / -h\n"
6586"        Print this text and exit.\n"
6587msgstr ""
6588
6589#: bin/check_db:119
6590msgid "No list named:"
6591msgstr ""
6592
6593#: bin/check_db:128
6594msgid "List:"
6595msgstr ""
6596
6597#: bin/check_db:148
6598msgid "   %(file)s: okay"
6599msgstr ""
6600
6601#: bin/check_perms:19
6602msgid ""
6603"Check the permissions for the Mailman installation.\n"
6604"\n"
6605"Usage: %(PROGRAM)s [-f] [-v] [-h]\n"
6606"\n"
6607"With no arguments, just check and report all the files that have bogus\n"
6608"permissions or group ownership.  With -f (and run as root), fix all the\n"
6609"permission problems found.  With -v be verbose.\n"
6610msgstr ""
6611
6612#: bin/check_perms:108
6613msgid "    checking gid and mode for %(path)s"
6614msgstr ""
6615
6616#: bin/check_perms:120
6617msgid "%(path)s bad group (has: %(groupname)s, expected %(MAILMAN_GROUP)s)"
6618msgstr ""
6619
6620#: bin/check_perms:143
6621msgid "directory permissions must be %(octperms)s: %(path)s"
6622msgstr ""
6623
6624#: bin/check_perms:152
6625msgid "source perms must be %(octperms)s: %(path)s"
6626msgstr ""
6627
6628#: bin/check_perms:163
6629msgid "article db files must be %(octperms)s: %(path)s"
6630msgstr ""
6631
6632#: bin/check_perms:175
6633msgid "checking mode for %(prefix)s"
6634msgstr ""
6635
6636#: bin/check_perms:185
6637msgid "WARNING: directory does not exist: %(d)s"
6638msgstr ""
6639
6640#: bin/check_perms:189
6641msgid "directory must be at least 02775: %(d)s"
6642msgstr ""
6643
6644#: bin/check_perms:201
6645msgid "checking perms on %(private)s"
6646msgstr ""
6647
6648#: bin/check_perms:206
6649msgid "%(private)s must not be other-readable"
6650msgstr ""
6651
6652#: bin/check_perms:215
6653msgid ""
6654"Warning: Private archive directory is other-executable (o+x).\n"
6655"         This could allow other users on your system to read private "
6656"archives.\n"
6657"         If you're on a shared multiuser system, you should consult the\n"
6658"         installation manual on how to fix this."
6659msgstr ""
6660
6661#: bin/check_perms:232
6662msgid "mbox file must be at least 0660:"
6663msgstr ""
6664
6665#: bin/check_perms:255
6666msgid "%(dbdir)s \"other\" perms must be 000"
6667msgstr ""
6668
6669#: bin/check_perms:265
6670msgid "checking cgi-bin permissions"
6671msgstr ""
6672
6673#: bin/check_perms:270
6674msgid "    checking set-gid for %(path)s"
6675msgstr ""
6676
6677#: bin/check_perms:274
6678msgid "%(path)s must be set-gid"
6679msgstr ""
6680
6681#: bin/check_perms:284
6682msgid "checking set-gid for %(wrapper)s"
6683msgstr ""
6684
6685#: bin/check_perms:288
6686msgid "%(wrapper)s must be set-gid"
6687msgstr ""
6688
6689#: bin/check_perms:298
6690msgid "checking permissions on %(pwfile)s"
6691msgstr ""
6692
6693#: bin/check_perms:307
6694msgid "%(pwfile)s permissions must be exactly 0640 (got %(octmode)s)"
6695msgstr ""
6696
6697#: bin/check_perms:331
6698msgid "checking permissions on list data"
6699msgstr ""
6700
6701#: bin/check_perms:337
6702msgid "    checking permissions on: %(path)s"
6703msgstr ""
6704
6705#: bin/check_perms:345
6706msgid "file permissions must be at least 660: %(path)s"
6707msgstr ""
6708
6709#: bin/check_perms:390
6710msgid "No problems found"
6711msgstr ""
6712
6713#: bin/check_perms:392
6714msgid "Problems found:"
6715msgstr ""
6716
6717#: bin/check_perms:393
6718msgid "Re-run as %(MAILMAN_USER)s (or root) with -f flag to fix"
6719msgstr ""
6720
6721#: bin/cleanarch:20
6722msgid ""
6723"Clean up an .mbox archive file.\n"
6724"\n"
6725"The archiver looks for Unix-From lines separating messages in an mbox "
6726"archive\n"
6727"file.  For compatibility, it specifically looks for lines that start with\n"
6728"\"From \" -- i.e. the letters capital-F, lowercase-r, o, m, space, ignoring\n"
6729"everything else on the line.\n"
6730"\n"
6731"Normally, any lines that start \"From \" in the body of a message should be\n"
6732"escaped such that a > character is actually the first on a line.  It is\n"
6733"possible though that body lines are not actually escaped.  This script\n"
6734"attempts to fix these by doing a stricter test of the Unix-From lines.  Any\n"
6735"lines that start \"From \" but do not pass this stricter test are escaped "
6736"with a\n"
6737"> character.\n"
6738"\n"
6739"Usage: cleanarch [options] < inputfile > outputfile\n"
6740"Options:\n"
6741"    -s n\n"
6742"    --status=n\n"
6743"        Print a # character every n lines processed\n"
6744"\n"
6745"    -q / --quiet\n"
6746"        Don't print changed line information to standard error.\n"
6747"\n"
6748"    -n / --dry-run\n"
6749"        Don't actually output anything.\n"
6750"\n"
6751"    -h / --help\n"
6752"        Print this message and exit\n"
6753msgstr ""
6754
6755#: bin/cleanarch:83
6756msgid "Unix-From line changed: %(lineno)d"
6757msgstr ""
6758
6759#: bin/cleanarch:111
6760msgid "Bad status number: %(arg)s"
6761msgstr ""
6762
6763#: bin/cleanarch:167
6764msgid "%(messages)d messages found"
6765msgstr ""
6766
6767#: bin/clone_member:19
6768msgid ""
6769"Clone a member address.\n"
6770"\n"
6771"Cloning a member address means that a new member will be added who has all "
6772"the\n"
6773"same options and passwords as the original member address.  Note that this\n"
6774"operation is fairly trusting of the user who runs it -- it does no\n"
6775"verification to the new address, it does not send out a welcome message, "
6776"etc.\n"
6777"\n"
6778"The existing member's subscription is usually not modified in any way.  If "
6779"you\n"
6780"want to remove the old address, use the -r flag.  If you also want to "
6781"change\n"
6782"any list admin addresses, use the -a flag.\n"
6783"\n"
6784"Usage:\n"
6785"    clone_member [options] fromoldaddr tonewaddr\n"
6786"\n"
6787"Where:\n"
6788"\n"
6789"    --listname=listname\n"
6790"    -l listname\n"
6791"        Check and modify only the named mailing lists.  If -l is not given,\n"
6792"        then all mailing lists are scanned from the address.  Multiple -l\n"
6793"        options can be supplied.\n"
6794"\n"
6795"    --remove\n"
6796"    -r\n"
6797"        Remove the old address from the mailing list after it's been "
6798"cloned.\n"
6799"\n"
6800"    --admin\n"
6801"    -a\n"
6802"        Scan the list admin addresses for the old address, and clone or "
6803"change\n"
6804"        them too.\n"
6805"\n"
6806"    --quiet\n"
6807"    -q\n"
6808"        Do the modifications quietly.\n"
6809"\n"
6810"    --nomodify\n"
6811"    -n\n"
6812"        Print what would be done, but don't actually do it.  Inhibits the\n"
6813"        --quiet flag.\n"
6814"\n"
6815"    --help\n"
6816"    -h\n"
6817"        Print this help message and exit.\n"
6818"\n"
6819" fromoldaddr (`from old address') is the old address of the user.  "
6820"tonewaddr\n"
6821" (`to new address') is the new address of the user.\n"
6822"\n"
6823msgstr ""
6824
6825#: bin/clone_member:94
6826msgid "processing mailing list:"
6827msgstr ""
6828
6829#: bin/clone_member:101
6830msgid "    scanning list owners:"
6831msgstr ""
6832
6833#: bin/clone_member:119
6834msgid "    new list owners:"
6835msgstr ""
6836
6837#: bin/clone_member:121
6838msgid "(no change)"
6839msgstr ""
6840
6841#: bin/clone_member:130
6842msgid "    address not found:"
6843msgstr ""
6844
6845#: bin/clone_member:139
6846msgid "    clone address added:"
6847msgstr ""
6848
6849#: bin/clone_member:142
6850msgid "    clone address is already a member:"
6851msgstr ""
6852
6853#: bin/clone_member:145
6854msgid "    original address removed:"
6855msgstr ""
6856
6857#: bin/clone_member:196
6858msgid "Not a valid email address: %(toaddr)s"
6859msgstr ""
6860
6861#: bin/clone_member:209
6862msgid ""
6863"Error opening list \"%(listname)s\", skipping.\n"
6864"%(e)s"
6865msgstr ""
6866
6867#: bin/config_list:20 bin/config_list.orig:19
6868msgid ""
6869"Configure a list from a text file description.\n"
6870"\n"
6871"Usage: config_list [options] listname\n"
6872"\n"
6873"Options:\n"
6874"    --inputfile filename\n"
6875"    -i filename\n"
6876"        Configure the list by assigning each module-global variable in the\n"
6877"        file to an attribute on the list object, then saving the list.  The\n"
6878"        named file is loaded with execfile() and must be legal Python code.\n"
6879"        Any variable that isn't already an attribute of the list object is\n"
6880"        ignored (a warning message is printed).  See also the -c option.\n"
6881"\n"
6882"        A special variable named `mlist' is put into the globals during the\n"
6883"        execfile, which is bound to the actual MailList object.  This lets "
6884"you\n"
6885"        do all manner of bizarre thing to the list object, but BEWARE!  "
6886"Using\n"
6887"        this can severely (and possibly irreparably) damage your mailing "
6888"list!\n"
6889"\n"
6890"    --outputfile filename\n"
6891"    -o filename\n"
6892"        Instead of configuring the list, print out a list's configuration\n"
6893"        variables in a format suitable for input using this script.  In "
6894"this\n"
6895"        way, you can easily capture the configuration settings for a\n"
6896"        particular list and imprint those settings on another list.  "
6897"filename\n"
6898"        is the file to output the settings to.  If filename is `-', "
6899"standard\n"
6900"        out is used.\n"
6901"\n"
6902"    --checkonly\n"
6903"    -c\n"
6904"        With this option, the modified list is not actually changed.  Only\n"
6905"        useful with -i.\n"
6906"\n"
6907"    --verbose\n"
6908"    -v\n"
6909"        Print the name of each attribute as it is being changed.  Only "
6910"useful\n"
6911"        with -i.\n"
6912"\n"
6913"    --help\n"
6914"    -h\n"
6915"        Print this help message and exit.\n"
6916"\n"
6917"The options -o and -i are mutually exclusive.\n"
6918"\n"
6919msgstr ""
6920
6921#: bin/config_list:117
6922msgid ""
6923"# -*- python -*-\n"
6924"# -*- coding: %(charset)s -*-\n"
6925"## \"%(listname)s\" mailing list configuration settings\n"
6926"## captured on %(when)s\n"
6927msgstr ""
6928
6929#: bin/config_list:143 bin/config_list.orig:131
6930msgid "options"
6931msgstr ""
6932
6933#: bin/config_list:202 bin/config_list.orig:188
6934msgid "legal values are:"
6935msgstr ""
6936
6937#: bin/config_list:269 bin/config_list.orig:255
6938msgid "attribute \"%(k)s\" ignored"
6939msgstr ""
6940
6941#: bin/config_list:272 bin/config_list.orig:258
6942msgid "attribute \"%(k)s\" changed"
6943msgstr ""
6944
6945#: bin/config_list:278 bin/config_list.orig:264
6946msgid "Non-standard property restored: %(k)s"
6947msgstr ""
6948
6949#: bin/config_list:286 bin/config_list.orig:272
6950msgid "Invalid value for property: %(k)s"
6951msgstr ""
6952
6953#: bin/config_list:288 bin/config_list.orig:274
6954msgid "Bad email address for option %(k)s: %(v)s"
6955msgstr ""
6956
6957#: bin/config_list:345 bin/config_list.orig:331
6958msgid "Only one of -i or -o is allowed"
6959msgstr ""
6960
6961#: bin/config_list:347 bin/config_list.orig:333
6962msgid "One of -i or -o is required"
6963msgstr ""
6964
6965#: bin/config_list:351 bin/config_list.orig:337
6966msgid "List name is required"
6967msgstr ""
6968
6969#: bin/config_list.orig:109
6970msgid ""
6971"## \"%(listname)s\" mailing list configuration settings -*- python -*-\n"
6972"## captured on %(when)s\n"
6973msgstr ""
6974
6975#: bin/convert.py:19
6976msgid ""
6977"Convert a list's interpolation strings from %-strings to $-strings.\n"
6978"\n"
6979"This script is intended to be run as a bin/withlist script, i.e.\n"
6980"\n"
6981"% bin/withlist -l -r convert <mylist>\n"
6982msgstr ""
6983
6984#: bin/convert.py:38 bin/fix_url.py:85
6985msgid "Saving list"
6986msgstr ""
6987
6988#: bin/convert.py:44 bin/fix_url.py:51 bin/reset_pw.py:57
6989msgid "%%%"
6990msgstr ""
6991
6992#: bin/discard:19
6993msgid ""
6994"Discard held messages.\n"
6995"\n"
6996"Usage:\n"
6997"    discard [options] file ...\n"
6998"\n"
6999"Options:\n"
7000"    --help / -h\n"
7001"        Print this help message and exit.\n"
7002"\n"
7003"    --quiet / -q\n"
7004"        Don't print status messages.\n"
7005msgstr ""
7006
7007#: bin/discard:94
7008msgid "Ignoring non-held message: %(f)s"
7009msgstr ""
7010
7011#: bin/discard:100
7012msgid "Ignoring held msg w/bad id: %(f)s"
7013msgstr ""
7014
7015#: bin/discard:112
7016msgid "Discarded held msg #%(id)s for list %(listname)s"
7017msgstr ""
7018
7019#: bin/dumpdb:19
7020msgid ""
7021"Dump the contents of any Mailman `database' file.\n"
7022"\n"
7023"Usage: %(PROGRAM)s [options] filename\n"
7024"\n"
7025"Options:\n"
7026"\n"
7027"    --marshal/-m\n"
7028"        Assume the file contains a Python marshal, overridding any "
7029"automatic\n"
7030"        guessing.\n"
7031"\n"
7032"    --pickle/-p\n"
7033"        Assume the file contains a Python pickle, overridding any automatic\n"
7034"        guessing.\n"
7035"\n"
7036"    --noprint/-n\n"
7037"        Don't attempt to pretty print the object.  This is useful if "
7038"there's\n"
7039"        some problem with the object and you just want to get an unpickled\n"
7040"        representation.  Useful with `python -i bin/dumpdb <file>'.  In "
7041"that\n"
7042"        case, the root of the tree will be left in a global called \"msg\".\n"
7043"\n"
7044"    --help/-h\n"
7045"        Print this help message and exit\n"
7046"\n"
7047"If the filename ends with `.db', then it is assumed that the file contains "
7048"a\n"
7049"Python marshal.  If the file ends with `.pck' then it is assumed to contain "
7050"a\n"
7051"Python pickle.  In either case, if you want to override the default "
7052"assumption\n"
7053"-- or if the file ends in neither suffix -- use the -p or -m flags.\n"
7054msgstr ""
7055
7056#: bin/dumpdb:106
7057msgid "No filename given."
7058msgstr ""
7059
7060#: bin/dumpdb:109
7061msgid "Bad arguments: %(pargs)s"
7062msgstr ""
7063
7064#: bin/dumpdb:119
7065msgid "Please specify either -p or -m."
7066msgstr ""
7067
7068#: bin/dumpdb:136
7069msgid "[----- start pickle file -----]"
7070msgstr ""
7071
7072#: bin/dumpdb:142
7073msgid "[----- end pickle file -----]"
7074msgstr ""
7075
7076#: bin/dumpdb:145
7077msgid "<----- start object %(cnt)s ----->"
7078msgstr ""
7079
7080#: bin/find_member:19
7081msgid ""
7082"Find all lists that a member's address is on.\n"
7083"\n"
7084"Usage:\n"
7085"    find_member [options] regex [regex [...]]\n"
7086"\n"
7087"Where:\n"
7088"    --listname=listname\n"
7089"    -l listname\n"
7090"        Include only the named list in the search.\n"
7091"\n"
7092"    --exclude=listname\n"
7093"    -x listname\n"
7094"        Exclude the named list from the search.\n"
7095"\n"
7096"    --owners\n"
7097"    -w\n"
7098"        Search list owners as well as members.\n"
7099"\n"
7100"    --help\n"
7101"    -h\n"
7102"        Print this help message and exit.\n"
7103"\n"
7104"    regex\n"
7105"        A Python regular expression to match against.\n"
7106"\n"
7107"The interaction between -l and -x is as follows.  If any -l option is given\n"
7108"then only the named list will be included in the search.  If any -x option "
7109"is\n"
7110"given but no -l option is given, then all lists will be search except those\n"
7111"specifically excluded.\n"
7112"\n"
7113"Regular expression syntax is Perl5-like, using the Python re module.  "
7114"Complete\n"
7115"specifications are at:\n"
7116"\n"
7117"http://www.python.org/doc/current/lib/module-re.html\n"
7118"\n"
7119"Address matches are case-insensitive, but case-preserved addresses are\n"
7120"displayed.\n"
7121"\n"
7122msgstr ""
7123
7124#: bin/find_member:159
7125msgid "Search regular expression required"
7126msgstr ""
7127
7128#: bin/find_member:164
7129msgid "No lists to search"
7130msgstr ""
7131
7132#: bin/find_member:173
7133msgid "found in:"
7134msgstr ""
7135
7136#: bin/find_member:179
7137msgid "(as owner)"
7138msgstr ""
7139
7140#: bin/fix_url.py:19
7141msgid ""
7142"Reset a list's web_page_url attribute to the default setting.\n"
7143"\n"
7144"This script is intended to be run as a bin/withlist script, i.e.\n"
7145"\n"
7146"% bin/withlist -l -r fix_url listname [options]\n"
7147"\n"
7148"Options:\n"
7149"    -u urlhost\n"
7150"    --urlhost=urlhost\n"
7151"        Look up urlhost in the virtual host table and set the web_page_url "
7152"and\n"
7153"        host_name attributes of the list to the values found.  This\n"
7154"        essentially moves the list from one virtual domain to another.\n"
7155"\n"
7156"        Without this option, the default web_page_url and host_name values "
7157"are\n"
7158"        used.\n"
7159"\n"
7160"    -v / --verbose\n"
7161"        Print what the script is doing.\n"
7162"\n"
7163"If run standalone, it prints this help text and exits.\n"
7164msgstr ""
7165
7166#: bin/fix_url.py:80
7167msgid "Setting web_page_url to: %(web_page_url)s"
7168msgstr ""
7169
7170#: bin/fix_url.py:83
7171msgid "Setting host_name to: %(mailhost)s"
7172msgstr ""
7173
7174#: bin/genaliases:19
7175msgid ""
7176"Regenerate Mailman specific aliases from scratch.\n"
7177"\n"
7178"The actual output depends on the value of the `MTA' variable in your mm_cfg."
7179"py\n"
7180"file.\n"
7181"\n"
7182"Usage: genaliases [options]\n"
7183"Options:\n"
7184"\n"
7185"    -q/--quiet\n"
7186"        Some MTA output can include more verbose help text.  Use this to "
7187"tone\n"
7188"        down the verbosity.\n"
7189"\n"
7190"    -h/--help\n"
7191"        Print this message and exit.\n"
7192msgstr ""
7193
7194#: bin/inject:19
7195msgid ""
7196"Inject a message from a file into Mailman's incoming queue.\n"
7197"\n"
7198"Usage: inject [options] [filename]\n"
7199"\n"
7200"Options:\n"
7201"\n"
7202"    -h / --help\n"
7203"        Print this text and exit.\n"
7204"\n"
7205"    -l listname\n"
7206"    --listname=listname\n"
7207"        The name of the list to inject this message to.  Required.\n"
7208"\n"
7209"    -q queuename\n"
7210"    --queue=queuename\n"
7211"        The name of the queue to inject the message to.  The queuename must "
7212"be\n"
7213"        one of the directories inside the qfiles directory.  If omitted, "
7214"the\n"
7215"        incoming queue is used.\n"
7216"\n"
7217"filename is the name of the plaintext message file to inject.  If omitted,\n"
7218"standard input is used.\n"
7219msgstr ""
7220
7221#: bin/inject:83
7222msgid "Bad queue directory: %(qdir)s"
7223msgstr ""
7224
7225#: bin/inject:88
7226msgid "A list name is required"
7227msgstr ""
7228
7229#: bin/list_admins:19
7230msgid ""
7231"List all the owners of a mailing list.\n"
7232"\n"
7233"Usage: %(program)s [options] listname ...\n"
7234"\n"
7235"Where:\n"
7236"\n"
7237"    --all-vhost=vhost\n"
7238"    -v=vhost\n"
7239"        List the owners of all the mailing lists for the given virtual "
7240"host.\n"
7241"\n"
7242"    --all\n"
7243"    -a\n"
7244"        List the owners of all the mailing lists on this system.\n"
7245"\n"
7246"    --help\n"
7247"    -h\n"
7248"        Print this help message and exit.\n"
7249"\n"
7250"`listname' is the name of the mailing list to print the owners of.  You can\n"
7251"have more than one named list on the command line.\n"
7252msgstr ""
7253
7254#: bin/list_admins:96
7255msgid "List: %(listname)s, \tOwners: %(owners)s"
7256msgstr ""
7257
7258#: bin/list_lists:19
7259msgid ""
7260"List all mailing lists.\n"
7261"\n"
7262"Usage: %(program)s [options]\n"
7263"\n"
7264"Where:\n"
7265"\n"
7266"    -a / --advertised\n"
7267"        List only those mailing lists that are publically advertised\n"
7268"\n"
7269"    --virtual-host-overview=domain\n"
7270"    -V domain\n"
7271"        List only those mailing lists that are homed to the given virtual\n"
7272"        domain.  This only works if the VIRTUAL_HOST_OVERVIEW variable is\n"
7273"        set.\n"
7274"\n"
7275"    -b / --bare\n"
7276"        Displays only the list name, with no description.\n"
7277"\n"
7278"    -h / --help\n"
7279"        Print this text and exit.\n"
7280"\n"
7281msgstr ""
7282
7283#: bin/list_lists:105
7284msgid "No matching mailing lists found"
7285msgstr ""
7286
7287#: bin/list_lists:109
7288msgid "matching mailing lists found:"
7289msgstr ""
7290
7291#: bin/list_members:19
7292msgid ""
7293"List all the members of a mailing list.\n"
7294"\n"
7295"Usage: %(PROGRAM)s [options] listname\n"
7296"\n"
7297"Where:\n"
7298"\n"
7299"    --output file\n"
7300"    -o file\n"
7301"        Write output to specified file instead of standard out.\n"
7302"\n"
7303"    --regular / -r\n"
7304"        Print just the regular (non-digest) members.\n"
7305"\n"
7306"    --digest[=kind] / -d [kind]\n"
7307"        Print just the digest members.  Optional argument can be \"mime\" "
7308"or\n"
7309"        \"plain\" which prints just the digest members receiving that kind "
7310"of\n"
7311"        digest.\n"
7312"\n"
7313"    --nomail[=why] / -n [why]\n"
7314"        Print the members that have delivery disabled.  Optional argument "
7315"can\n"
7316"        be \"byadmin\", \"byuser\", \"bybounce\", or \"unknown\" which "
7317"prints just the\n"
7318"        users who have delivery disabled for that reason.  It can also be\n"
7319"        \"enabled\" which prints just those member for whom delivery is\n"
7320"        enabled.\n"
7321"\n"
7322"    --fullnames / -f\n"
7323"        Include the full names in the output.\n"
7324"\n"
7325"    --preserve / -p\n"
7326"        Output member addresses case preserved the way they were added to "
7327"the\n"
7328"        list.  Otherwise, addresses are printed in all lowercase.\n"
7329"\n"
7330"    --invalid / -i\n"
7331"        Print only the addresses in the membership list that are invalid.\n"
7332"        Ignores -r, -d, -n.\n"
7333"\n"
7334"    --unicode / -u\n"
7335"        Print addresses which are stored as Unicode objects instead of "
7336"normal\n"
7337"        string objects.  Ignores -r, -d, -n.\n"
7338"\n"
7339"    --help\n"
7340"    -h\n"
7341"        Print this help message and exit.\n"
7342"\n"
7343"    listname is the name of the mailing list to use.\n"
7344"\n"
7345"Note that if neither -r or -d is supplied, both regular members are printed\n"
7346"first, followed by digest members, but no indication is given as to address\n"
7347"status.\n"
7348msgstr ""
7349
7350#: bin/list_members:191
7351msgid "Bad --nomail option: %(why)s"
7352msgstr ""
7353
7354#: bin/list_members:202
7355msgid "Bad --digest option: %(kind)s"
7356msgstr ""
7357
7358#: bin/list_members:224
7359msgid "Could not open file for writing:"
7360msgstr ""
7361
7362#: bin/list_owners:19
7363msgid ""
7364"List the owners of a mailing list, or all mailing lists.\n"
7365"\n"
7366"Usage: %(PROGRAM)s [options] [listname ...]\n"
7367"Options:\n"
7368"\n"
7369"    -w / --with-listnames\n"
7370"        Group the owners by list names and include the list names in the\n"
7371"        output.  Otherwise, the owners will be sorted and uniquified based "
7372"on\n"
7373"        the email address.\n"
7374"\n"
7375"    -m / --moderators\n"
7376"        Include the list moderators in the output.\n"
7377"\n"
7378"    -h / --help\n"
7379"        Print this help message and exit.\n"
7380"\n"
7381"    listname\n"
7382"        Print the owners of the specified lists.  More than one can appear\n"
7383"        after the options.  If there are no listnames provided, the owners "
7384"of\n"
7385"        all the lists will be displayed.\n"
7386msgstr ""
7387
7388#: bin/mailmanctl:20
7389msgid ""
7390"Primary start-up and shutdown script for Mailman's qrunner daemon.\n"
7391"\n"
7392"This script starts, stops, and restarts the main Mailman queue runners, "
7393"making\n"
7394"sure that the various long-running qrunners are still alive and kicking.  "
7395"It\n"
7396"does this by forking and exec'ing the qrunners and waiting on their pids.\n"
7397"When it detects a subprocess has exited, it may restart it.\n"
7398"\n"
7399"The qrunners respond to SIGINT, SIGTERM, and SIGHUP.  SIGINT and SIGTERM "
7400"both\n"
7401"cause the qrunners to exit cleanly, but the master will only restart "
7402"qrunners\n"
7403"that have exited due to a SIGINT.  SIGHUP causes the master and the "
7404"qrunners\n"
7405"to close their log files, and reopen then upon the next printed message.\n"
7406"\n"
7407"The master also responds to SIGINT, SIGTERM, and SIGHUP, which it simply\n"
7408"passes on to the qrunners (note that the master will close and reopen its "
7409"own\n"
7410"log files on receipt of a SIGHUP).  The master also leaves its own process "
7411"id\n"
7412"in the file data/master-qrunner.pid but you normally don't need to use this\n"
7413"pid directly.  The `start', `stop', `restart', and `reopen' commands handle\n"
7414"everything for you.\n"
7415"\n"
7416"Usage: %(PROGRAM)s [options] [ start | stop | restart | reopen ]\n"
7417"\n"
7418"Options:\n"
7419"\n"
7420"    -n/--no-restart\n"
7421"        Don't restart the qrunners when they exit because of an error or a\n"
7422"        SIGINT.  They are never restarted if they exit in response to a\n"
7423"        SIGTERM.  Use this only for debugging.  Only useful if the `start'\n"
7424"        command is given.\n"
7425"\n"
7426"    -u/--run-as-user\n"
7427"        Normally, this script will refuse to run if the user id and group "
7428"id\n"
7429"        are not set to the `mailman' user and group (as defined when you\n"
7430"        configured Mailman).  If run as root, this script will change to "
7431"this\n"
7432"        user and group before the check is made.\n"
7433"\n"
7434"        This can be inconvenient for testing and debugging purposes, so the -"
7435"u\n"
7436"        flag means that the step that sets and checks the uid/gid is "
7437"skipped,\n"
7438"        and the program is run as the current user and group.  This flag is\n"
7439"        not recommended for normal production environments.\n"
7440"\n"
7441"        Note though, that if you run with -u and are not in the mailman "
7442"group,\n"
7443"        you may have permission problems, such as begin unable to delete a\n"
7444"        list's archives through the web.  Tough luck!\n"
7445"\n"
7446"    -s/--stale-lock-cleanup\n"
7447"        If mailmanctl finds an existing master lock, it will normally exit\n"
7448"        with an error message.  With this option, mailmanctl will perform "
7449"an\n"
7450"        extra level of checking.  If a process matching the host/pid "
7451"described\n"
7452"        in the lock file is running, mailmanctl will still exit, but if no\n"
7453"        matching process is found, mailmanctl will remove the apparently "
7454"stale\n"
7455"        lock and make another attempt to claim the master lock.\n"
7456"\n"
7457"    -q/--quiet\n"
7458"        Don't print status messages.  Error messages are still printed to\n"
7459"        standard error.\n"
7460"\n"
7461"    -h/--help\n"
7462"        Print this message and exit.\n"
7463"\n"
7464"Commands:\n"
7465"\n"
7466"    start   - Start the master daemon and all qrunners.  Prints a message "
7467"and\n"
7468"              exits if the master daemon is already running.\n"
7469"\n"
7470"    stop    - Stops the master daemon and all qrunners.  After stopping, no\n"
7471"              more messages will be processed.\n"
7472"\n"
7473"    restart - Restarts the qrunners, but not the master process.  Use this\n"
7474"              whenever you upgrade or update Mailman so that the qrunners "
7475"will\n"
7476"              use the newly installed code.\n"
7477"\n"
7478"    reopen  - This will close all log files, causing them to be re-opened "
7479"the\n"
7480"              next time a message is written to them\n"
7481msgstr ""
7482
7483#: bin/mailmanctl:152
7484msgid "PID unreadable in: %(pidfile)s"
7485msgstr ""
7486
7487#: bin/mailmanctl:154
7488msgid "Is qrunner even running?"
7489msgstr ""
7490
7491#: bin/mailmanctl:160
7492msgid "No child with pid: %(pid)s"
7493msgstr ""
7494
7495#: bin/mailmanctl:162
7496msgid "Stale pid file removed."
7497msgstr ""
7498
7499#: bin/mailmanctl:220
7500msgid ""
7501"The master qrunner lock could not be acquired because it appears as if "
7502"another\n"
7503"master qrunner is already running.\n"
7504msgstr ""
7505
7506#: bin/mailmanctl:226
7507msgid ""
7508"The master qrunner lock could not be acquired.  It appears as though there "
7509"is\n"
7510"a stale master qrunner lock.  Try re-running mailmanctl with the -s flag.\n"
7511msgstr ""
7512
7513#: bin/mailmanctl:232
7514msgid ""
7515"The master qrunner lock could not be acquired, because it appears as if "
7516"some\n"
7517"process on some other host may have acquired it.  We can't test for stale\n"
7518"locks across host boundaries, so you'll have to do this manually.  Or, if "
7519"you\n"
7520"know the lock is stale, re-run mailmanctl with the -s flag.\n"
7521"\n"
7522"Lock file: %(LOCKFILE)s\n"
7523"Lock host: %(status)s\n"
7524"\n"
7525"Exiting."
7526msgstr ""
7527
7528#: bin/mailmanctl:279 cron/mailpasswds:119
7529msgid "Site list is missing: %(sitelistname)s"
7530msgstr ""
7531
7532#: bin/mailmanctl:304
7533msgid "Run this program as root or as the %(name)s user, or use -u."
7534msgstr ""
7535
7536#: bin/mailmanctl:335
7537msgid "No command given."
7538msgstr ""
7539
7540#: bin/mailmanctl:338
7541msgid "Bad command: %(command)s"
7542msgstr ""
7543
7544#: bin/mailmanctl:343
7545msgid "Warning!  You may encounter permission problems."
7546msgstr ""
7547
7548#: bin/mailmanctl:352
7549msgid "Shutting down Mailman's master qrunner"
7550msgstr ""
7551
7552#: bin/mailmanctl:359
7553msgid "Restarting Mailman's master qrunner"
7554msgstr ""
7555
7556#: bin/mailmanctl:363
7557msgid "Re-opening all log files"
7558msgstr ""
7559
7560#: bin/mailmanctl:399
7561msgid "Starting Mailman's master qrunner."
7562msgstr ""
7563
7564#: bin/mmsitepass:19
7565msgid ""
7566"Set the site password, prompting from the terminal.\n"
7567"\n"
7568"The site password can be used in most if not all places that the list\n"
7569"administrator's password can be used, which in turn can be used in most "
7570"places\n"
7571"that a list users password can be used.\n"
7572"\n"
7573"Usage: %(PROGRAM)s [options] [password]\n"
7574"\n"
7575"Options:\n"
7576"\n"
7577"    -c/--listcreator\n"
7578"        Set the list creator password instead of the site password.  The "
7579"list\n"
7580"        creator is authorized to create and remove lists, but does not have\n"
7581"        the total power of the site administrator.\n"
7582"\n"
7583"    -h/--help\n"
7584"        Print this help message and exit.\n"
7585"\n"
7586"If password is not given on the command line, it will be prompted for.\n"
7587msgstr ""
7588
7589#: bin/mmsitepass:73
7590msgid "site"
7591msgstr ""
7592
7593#: bin/mmsitepass:80
7594msgid "list creator"
7595msgstr ""
7596
7597#: bin/mmsitepass:86
7598msgid "New %(pwdesc)s password: "
7599msgstr ""
7600
7601#: bin/mmsitepass:87
7602msgid "Again to confirm password: "
7603msgstr ""
7604
7605#: bin/mmsitepass:89
7606msgid "Passwords do not match; no changes made."
7607msgstr ""
7608
7609#: bin/mmsitepass:92
7610msgid "Interrupted..."
7611msgstr ""
7612
7613#: bin/mmsitepass:98
7614msgid "Password changed."
7615msgstr ""
7616
7617#: bin/mmsitepass:100
7618msgid "Password change failed."
7619msgstr ""
7620
7621#: bin/msgfmt.py:5
7622msgid ""
7623"Generate binary message catalog from textual translation description.\n"
7624"\n"
7625"This program converts a textual Uniforum-style message catalog (.po file) "
7626"into\n"
7627"a binary GNU catalog (.mo file).  This is essentially the same function as "
7628"the\n"
7629"GNU msgfmt program, however, it is a simpler implementation.\n"
7630"\n"
7631"Usage: msgfmt.py [OPTIONS] filename.po\n"
7632"\n"
7633"Options:\n"
7634"    -o file\n"
7635"    --output-file=file\n"
7636"        Specify the output file to write to.  If omitted, output will go to "
7637"a\n"
7638"        file named filename.mo (based off the input file name).\n"
7639"\n"
7640"    -h\n"
7641"    --help\n"
7642"        Print this message and exit.\n"
7643"\n"
7644"    -V\n"
7645"    --version\n"
7646"        Display version information and exit.\n"
7647msgstr ""
7648
7649#: bin/msgfmt.py:49
7650msgid "Add a non-fuzzy translation to the dictionary."
7651msgstr ""
7652
7653#: bin/msgfmt.py:57
7654msgid "Return the generated output."
7655msgstr ""
7656
7657#: bin/newlist:19
7658msgid ""
7659"Create a new, unpopulated mailing list.\n"
7660"\n"
7661"Usage: %(PROGRAM)s [options] [listname [listadmin-addr [admin-password]]]\n"
7662"\n"
7663"Options:\n"
7664"\n"
7665"    -l language\n"
7666"    --language=language\n"
7667"        Make the list's preferred language `language', which must be a two\n"
7668"        letter language code.\n"
7669"\n"
7670"    -u urlhost\n"
7671"    --urlhost=urlhost\n"
7672"        Gives the list's web interface host name.\n"
7673"\n"
7674"    -e emailhost\n"
7675"    --emailhost=emailhost\n"
7676"        Gives the list's email domain name.\n"
7677"\n"
7678"    -q/--quiet\n"
7679"        Normally the administrator is notified by email (after a prompt) "
7680"that\n"
7681"        their list has been created.  This option suppresses the prompt and\n"
7682"        notification.\n"
7683"\n"
7684"    -h/--help\n"
7685"        Print this help text and exit.\n"
7686"\n"
7687"You can specify as many of the arguments as you want on the command line:\n"
7688"you will be prompted for the missing ones.\n"
7689"\n"
7690"Every Mailman list has two parameters which define the default host name "
7691"for\n"
7692"outgoing email, and the default URL for all web interfaces.  When you\n"
7693"configured Mailman, certain defaults were calculated, but if you are "
7694"running\n"
7695"multiple virtual Mailman sites, then the defaults may not be appropriate "
7696"for\n"
7697"the list you are creating.\n"
7698"\n"
7699"You also specify the domain to create your new list in by typing the "
7700"command\n"
7701"like so:\n"
7702"\n"
7703"    newlist --urlhost=www.mydom.ain mylist\n"
7704"\n"
7705"where `www.mydom.ain' should be the base hostname for the URL to this "
7706"virtual\n"
7707"hosts's lists.  E.g. with this setting people will view the general list\n"
7708"overviews at http://www.mydom.ain/mailman/listinfo.  Also, www.mydom.ain\n"
7709"should be a key in the VIRTUAL_HOSTS mapping in mm_cfg.py/Defaults.py if\n"
7710"the email hostname to be automatically determined.\n"
7711"\n"
7712"If you want the email hostname to be different from the one looked up by "
7713"the\n"
7714"VIRTUAL_HOSTS or if urlhost is not registered in VIRTUAL_HOSTS, you can "
7715"specify\n"
7716"`emailhost' like so:\n"
7717"\n"
7718"    newlist --urlhost=www.mydom.ain --emailhost=mydom.ain mylist\n"
7719"\n"
7720"where `mydom.ain' is the mail domain name. If you don't specify emailhost "
7721"but\n"
7722"urlhost is not in the virtual host list, then mm_cfg.DEFAULT_EMAIL_HOST "
7723"will\n"
7724"be used for the email interface.\n"
7725"\n"
7726"For backward compatibility, you can also specify the domain to create your\n"
7727"new list in by spelling the listname like so:\n"
7728"\n"
7729"    mylist@www.mydom.ain\n"
7730"\n"
7731"where www.mydom.ain is used for `urlhost' but it will also be used for\n"
7732"`emailhost' if it is not found in the virtual host table. Note that\n"
7733"'--urlhost' and '--emailhost' have precedence to this notation.\n"
7734"\n"
7735"If you spell the list name as just `mylist', then the email hostname will "
7736"be\n"
7737"taken from DEFAULT_EMAIL_HOST and the url will be taken from DEFAULT_URL "
7738"(as\n"
7739"defined in your Defaults.py file or overridden by settings in mm_cfg.py).\n"
7740"\n"
7741"Note that listnames are forced to lowercase.\n"
7742msgstr ""
7743
7744#: bin/newlist:150
7745msgid "Unknown language: %(lang)s"
7746msgstr ""
7747
7748#: bin/newlist:155
7749msgid "Enter the name of the list: "
7750msgstr ""
7751
7752#: bin/newlist:176
7753msgid "Enter the email of the person running the list: "
7754msgstr ""
7755
7756#: bin/newlist:181
7757msgid "Initial %(listname)s password: "
7758msgstr ""
7759
7760#: bin/newlist:185
7761msgid "The list password cannot be empty"
7762msgstr ""
7763
7764#: bin/newlist:225
7765msgid "Hit enter to notify %(listname)s owner..."
7766msgstr ""
7767
7768#: bin/qrunner:20
7769msgid ""
7770"Run one or more qrunners, once or repeatedly.\n"
7771"\n"
7772"Each named runner class is run in round-robin fashion.  In other words, the\n"
7773"first named runner is run to consume all the files currently in its\n"
7774"directory.  When that qrunner is done, the next one is run to consume all "
7775"the\n"
7776"files in /its/ directory, and so on.  The number of total iterations can be\n"
7777"given on the command line.\n"
7778"\n"
7779"Usage: %(PROGRAM)s [options]\n"
7780"\n"
7781"Options:\n"
7782"\n"
7783"    -r runner[:slice:range]\n"
7784"    --runner=runner[:slice:range]\n"
7785"        Run the named qrunner, which must be one of the strings returned by\n"
7786"        the -l option.  Optional slice:range if given, is used to assign\n"
7787"        multiple qrunner processes to a queue.  range is the total number "
7788"of\n"
7789"        qrunners for this queue while slice is the number of this qrunner "
7790"from\n"
7791"        [0..range).\n"
7792"\n"
7793"        If using the slice:range form, you better make sure that each "
7794"qrunner\n"
7795"        for the queue is given the same range value.  If slice:runner is "
7796"not\n"
7797"        given, then 1:1 is used.\n"
7798"\n"
7799"        Multiple -r options may be given, in which case each qrunner will "
7800"run\n"
7801"        once in round-robin fashion.  The special runner `All' is shorthand\n"
7802"        for a qrunner for each listed by the -l option.\n"
7803"\n"
7804"    --once\n"
7805"    -o\n"
7806"        Run each named qrunner exactly once through its main loop.  "
7807"Otherwise,\n"
7808"        each qrunner runs indefinitely, until the process receives a "
7809"SIGTERM\n"
7810"        or SIGINT.\n"
7811"\n"
7812"    -l/--list\n"
7813"        Shows the available qrunner names and exit.\n"
7814"\n"
7815"    -v/--verbose\n"
7816"        Spit out more debugging information to the logs/qrunner log file.\n"
7817"\n"
7818"    -s/--subproc\n"
7819"        This should only be used when running qrunner as a subprocess of "
7820"the\n"
7821"        mailmanctl startup script.  It changes some of the exit-on-error\n"
7822"        behavior to work better with that framework.\n"
7823"\n"
7824"    -h/--help\n"
7825"        Print this message and exit.\n"
7826"\n"
7827"runner is required unless -l or -h is given, and it must be one of the "
7828"names\n"
7829"displayed by the -l switch.\n"
7830"\n"
7831"Note also that this script should be started up from mailmanctl as a normal\n"
7832"operation.  It is only useful for debugging if it is run separately.\n"
7833msgstr ""
7834
7835#: bin/qrunner:178
7836msgid "%(name)s runs the %(runnername)s qrunner"
7837msgstr ""
7838
7839#: bin/qrunner:179
7840msgid "All runs all the above qrunners"
7841msgstr ""
7842
7843#: bin/qrunner:215
7844msgid "No runner name given."
7845msgstr ""
7846
7847#: bin/rb-archfix:21
7848msgid ""
7849"Reduce disk space usage for Pipermail archives.\n"
7850"\n"
7851"Usage: %(PROGRAM)s [options] file ...\n"
7852"\n"
7853"Where options are:\n"
7854"    -h / --help\n"
7855"        Print this help message and exit.\n"
7856"\n"
7857"Only use this to 'fix' archive -article database files that have been "
7858"written\n"
7859"with Mailman 2.1.3 or earlier and have html_body attributes in them.  These\n"
7860"attributes can cause huge amounts of memory bloat and impact performance "
7861"for\n"
7862"high activity lists, particularly those where large text postings are made "
7863"to\n"
7864"them.\n"
7865"\n"
7866"Example:\n"
7867"\n"
7868"%% ls -1 archives/private/*/database/*-article | xargs %(PROGRAM)s\n"
7869"\n"
7870"You should run `bin/check_perms -f' after running this script.\n"
7871"\n"
7872"You will probably want to delete the -article.bak files created by this "
7873"script\n"
7874"when you are satisfied with the results.\n"
7875"\n"
7876"This script is provided for convenience purposes only.  It isn't supported.\n"
7877msgstr ""
7878
7879#: bin/remove_members:20
7880msgid ""
7881"Remove members from a list.\n"
7882"\n"
7883"Usage:\n"
7884"    remove_members [options] [listname] [addr1 ...]\n"
7885"\n"
7886"Options:\n"
7887"\n"
7888"    --file=file\n"
7889"    -f file\n"
7890"        Remove member addresses found in the given file.  If file is\n"
7891"        `-', read stdin.\n"
7892"\n"
7893"    --all\n"
7894"    -a\n"
7895"        Remove all members of the mailing list.\n"
7896"        (mutually exclusive with --fromall)\n"
7897"\n"
7898"    --fromall\n"
7899"        Removes the given addresses from all the lists on this system\n"
7900"        regardless of virtual domains if you have any.  This option cannot "
7901"be\n"
7902"        used -a/--all.  Also, you should not specify a listname when using\n"
7903"        this option.\n"
7904"\n"
7905"    --nouserack\n"
7906"    -n\n"
7907"        Don't send the user acknowledgements.  If not specified, the list\n"
7908"        default value is used.\n"
7909"\n"
7910"    --noadminack\n"
7911"    -N\n"
7912"        Don't send the admin acknowledgements.  If not specified, the list\n"
7913"        default value is used.\n"
7914"\n"
7915"    --help\n"
7916"    -h\n"
7917"        Print this help message and exit.\n"
7918"\n"
7919"    listname is the name of the mailing list to use.\n"
7920"\n"
7921"    addr1 ... are additional addresses to remove.\n"
7922msgstr ""
7923
7924#: bin/remove_members:156
7925msgid "Could not open file for reading: %(filename)s."
7926msgstr ""
7927
7928#: bin/remove_members:163
7929msgid "Error opening list %(listname)s... skipping."
7930msgstr ""
7931
7932#: bin/remove_members:173
7933msgid "No such member: %(addr)s"
7934msgstr ""
7935
7936#: bin/remove_members:178
7937msgid "User `%(addr)s' removed from list: %(listname)s."
7938msgstr ""
7939
7940#: bin/reset_pw.py:21
7941msgid ""
7942"Reset the passwords for members of a mailing list.\n"
7943"\n"
7944"This script resets all the passwords of a mailing list's members.  It can "
7945"also\n"
7946"be used to reset the lists of all members of all mailing lists, but it is "
7947"your\n"
7948"responsibility to let the users know that their passwords have been "
7949"changed.\n"
7950"\n"
7951"This script is intended to be run as a bin/withlist script, i.e.\n"
7952"\n"
7953"% bin/withlist -l -r reset_pw listname [options]\n"
7954"\n"
7955"Options:\n"
7956"    -v / --verbose\n"
7957"        Print what the script is doing.\n"
7958msgstr ""
7959
7960#: bin/reset_pw.py:77
7961msgid "Changing passwords for list: %(listname)s"
7962msgstr ""
7963
7964#: bin/reset_pw.py:83
7965msgid "New password for member %(member)40s: %(randompw)s"
7966msgstr ""
7967
7968#: bin/rmlist:19
7969msgid ""
7970"Remove the components of a mailing list with impunity - beware!\n"
7971"\n"
7972"This removes (almost) all traces of a mailing list.  By default, the lists\n"
7973"archives are not removed, which is very handy for retiring old lists.\n"
7974"\n"
7975"Usage:\n"
7976"    rmlist [-a] [-h] listname\n"
7977"\n"
7978"Where:\n"
7979"    --archives\n"
7980"    -a\n"
7981"        Remove the list's archives too, or if the list has already been\n"
7982"        deleted, remove any residual archives.\n"
7983"\n"
7984"    --help\n"
7985"    -h\n"
7986"        Print this help message and exit.\n"
7987"\n"
7988msgstr ""
7989
7990#: bin/rmlist:72 bin/rmlist:75
7991msgid "Removing %(msg)s"
7992msgstr ""
7993
7994#: bin/rmlist:80
7995msgid "%(listname)s %(msg)s not found as %(filename)s"
7996msgstr ""
7997
7998#: bin/rmlist:104
7999msgid "No such list (or list already deleted): %(listname)s"
8000msgstr ""
8001
8002#: bin/rmlist:106
8003msgid "No such list: %(listname)s.  Removing its residual archives."
8004msgstr ""
8005
8006#: bin/rmlist:110
8007msgid "Not removing archives.  Reinvoke with -a to remove them."
8008msgstr ""
8009
8010#: bin/rmlist:124
8011msgid "list info"
8012msgstr ""
8013
8014#: bin/rmlist:132
8015msgid "stale lock file"
8016msgstr ""
8017
8018#: bin/rmlist:137 bin/rmlist:139
8019msgid "private archives"
8020msgstr ""
8021
8022#: bin/rmlist:141 bin/rmlist:143
8023msgid "public archives"
8024msgstr ""
8025
8026#: bin/show_qfiles:20
8027msgid ""
8028"Show the contents of one or more Mailman queue files.\n"
8029"\n"
8030"Usage: show_qfiles [options] qfile ...\n"
8031"\n"
8032"Options:\n"
8033"\n"
8034"    -q / --quiet\n"
8035"        Don't print `helpful' message delimiters.\n"
8036"\n"
8037"    -h / --help\n"
8038"        Print this text and exit.\n"
8039"\n"
8040"Example: show_qfiles qfiles/shunt/*.pck\n"
8041msgstr ""
8042
8043#: bin/sync_members:19
8044msgid ""
8045"Synchronize a mailing list's membership with a flat file.\n"
8046"\n"
8047"This script is useful if you have a Mailman mailing list and a sendmail\n"
8048":include: style list of addresses (also as is used in Majordomo).  For "
8049"every\n"
8050"address in the file that does not appear in the mailing list, the address "
8051"is\n"
8052"added.  For every address in the mailing list that does not appear in the\n"
8053"file, the address is removed.  Other options control what happens when an\n"
8054"address is added or removed.\n"
8055"\n"
8056"Usage: %(PROGRAM)s [options] -f file listname\n"
8057"\n"
8058"Where `options' are:\n"
8059"\n"
8060"    --no-change\n"
8061"    -n\n"
8062"        Don't actually make the changes.  Instead, print out what would be\n"
8063"        done to the list.\n"
8064"\n"
8065"    --welcome-msg[=<yes|no>]\n"
8066"    -w[=<yes|no>]\n"
8067"        Sets whether or not to send the newly added members a welcome\n"
8068"        message, overriding whatever the list's `send_welcome_msg' setting\n"
8069"        is.  With -w=yes or -w, the welcome message is sent.  With -w=no, "
8070"no\n"
8071"        message is sent.\n"
8072"\n"
8073"    --goodbye-msg[=<yes|no>]\n"
8074"    -g[=<yes|no>]\n"
8075"        Sets whether or not to send the goodbye message to removed members,\n"
8076"        overriding whatever the list's `send_goodbye_msg' setting is.  With\n"
8077"        -g=yes or -g, the goodbye message is sent.  With -g=no, no message "
8078"is\n"
8079"        sent.\n"
8080"\n"
8081"    --digest[=<yes|no>]\n"
8082"    -d[=<yes|no>]\n"
8083"        Selects whether to make newly added members receive messages in\n"
8084"        digests.  With -d=yes or -d, they become digest members.  With -"
8085"d=no\n"
8086"        (or if no -d option given) they are added as regular members.\n"
8087"\n"
8088"    --notifyadmin[=<yes|no>]\n"
8089"    -a[=<yes|no>]\n"
8090"        Specifies whether the admin should be notified for each "
8091"subscription\n"
8092"        or unsubscription.  If you're adding a lot of addresses, you\n"
8093"        definitely want to turn this off!  With -a=yes or -a, the admin is\n"
8094"        notified.  With -a=no, the admin is not notified.  With no -a "
8095"option,\n"
8096"        the default for the list is used.\n"
8097"\n"
8098"    --file <filename | ->\n"
8099"    -f <filename | ->\n"
8100"        This option is required.  It specifies the flat file to synchronize\n"
8101"        against.  Email addresses must appear one per line.  If filename is\n"
8102"        `-' then stdin is used.\n"
8103"\n"
8104"    --help\n"
8105"    -h\n"
8106"        Print this message.\n"
8107"\n"
8108"    listname\n"
8109"        Required.  This specifies the list to synchronize.\n"
8110msgstr ""
8111
8112#: bin/sync_members:115
8113msgid "Bad choice: %(yesno)s"
8114msgstr ""
8115
8116#: bin/sync_members:138
8117msgid "Dry run mode"
8118msgstr ""
8119
8120#: bin/sync_members:159
8121msgid "Only one -f switch allowed"
8122msgstr ""
8123
8124#: bin/sync_members:163
8125msgid "No argument to -f given"
8126msgstr ""
8127
8128#: bin/sync_members:172
8129msgid "Illegal option: %(opt)s"
8130msgstr ""
8131
8132#: bin/sync_members:178
8133msgid "No listname given"
8134msgstr ""
8135
8136#: bin/sync_members:182
8137msgid "Must have a listname and a filename"
8138msgstr ""
8139
8140#: bin/sync_members:191
8141msgid "Cannot read address file: %(filename)s: %(msg)s"
8142msgstr ""
8143
8144#: bin/sync_members:203
8145msgid "Ignore  :  %(addr)30s"
8146msgstr ""
8147
8148#: bin/sync_members:212
8149msgid "Invalid :  %(addr)30s"
8150msgstr ""
8151
8152#: bin/sync_members:215
8153msgid "You must fix the preceding invalid addresses first."
8154msgstr ""
8155
8156#: bin/sync_members:260
8157msgid "Added  : %(s)s"
8158msgstr ""
8159
8160#: bin/sync_members:278
8161msgid "Removed: %(s)s"
8162msgstr ""
8163
8164#: bin/transcheck:18
8165msgid ""
8166"\n"
8167"Check a given Mailman translation, making sure that variables and\n"
8168"tags referenced in translation are the same variables and tags in\n"
8169"the original templates and catalog.\n"
8170"\n"
8171"Usage:\n"
8172"\n"
8173"cd $MAILMAN_DIR\n"
8174"%(program)s [-q] <lang>\n"
8175"\n"
8176"Where <lang> is your country code (e.g. 'it' for Italy) and -q is\n"
8177"to ask for a brief summary.\n"
8178msgstr ""
8179
8180#: bin/transcheck:57
8181msgid "check a translation comparing with the original string"
8182msgstr ""
8183
8184#: bin/transcheck:67
8185msgid "scan a string from the original file"
8186msgstr ""
8187
8188#: bin/transcheck:77
8189msgid "scan a translated string"
8190msgstr ""
8191
8192#: bin/transcheck:90
8193msgid "check for differences between checked in and checked out"
8194msgstr ""
8195
8196#: bin/transcheck:123
8197msgid "parse a .po file extracting msgids and msgstrs"
8198msgstr ""
8199
8200#: bin/transcheck:142
8201msgid ""
8202"States table for the finite-states-machine parser:\n"
8203"            0  idle\n"
8204"            1  filename-or-comment\n"
8205"            2  msgid\n"
8206"            3  msgstr\n"
8207"            4  end\n"
8208"        "
8209msgstr ""
8210
8211#: bin/transcheck:279
8212msgid ""
8213"check a translated template against the original one\n"
8214"       search also <MM-*> tags if html is not zero"
8215msgstr ""
8216
8217#: bin/transcheck:326
8218msgid "scan the po file comparing msgids with msgstrs"
8219msgstr ""
8220
8221#: bin/unshunt:19
8222msgid ""
8223"Move a message from the shunt queue to the original queue.\n"
8224"\n"
8225"Usage: %(PROGRAM)s [options] [directory]\n"
8226"\n"
8227"Where:\n"
8228"\n"
8229"    -h / --help\n"
8230"        Print help and exit.\n"
8231"\n"
8232"Optional `directory' specifies a directory to dequeue from other than\n"
8233"qfiles/shunt.\n"
8234msgstr ""
8235
8236#: bin/unshunt:81
8237msgid ""
8238"Cannot unshunt message %(filebase)s, skipping:\n"
8239"%(e)s"
8240msgstr ""
8241
8242#: bin/update:19
8243msgid ""
8244"Perform all necessary upgrades.\n"
8245"\n"
8246"Usage: %(PROGRAM)s [options]\n"
8247"\n"
8248"Options:\n"
8249"    -f/--force\n"
8250"        Force running the upgrade procedures.  Normally, if the version "
8251"number\n"
8252"        of the installed Mailman matches the current version number (or a\n"
8253"        `downgrade' is detected), nothing will be done.\n"
8254"\n"
8255"    -h/--help\n"
8256"        Print this text and exit.\n"
8257"\n"
8258"Use this script to help you update to the latest release of Mailman from\n"
8259"some previous version.  It knows about versions back to 1.0b4 (?).\n"
8260msgstr ""
8261
8262#: bin/update:107
8263msgid "Fixing language templates: %(listname)s"
8264msgstr ""
8265
8266#: bin/update:196 bin/update:698
8267msgid "WARNING: could not acquire lock for list: %(listname)s"
8268msgstr ""
8269
8270#: bin/update:215
8271msgid "Resetting %(n)s BYBOUNCEs disabled addrs with no bounce info"
8272msgstr ""
8273
8274#: bin/update:221
8275msgid "Updating the held requests database."
8276msgstr ""
8277
8278#: bin/update:243
8279msgid ""
8280"For some reason, %(mbox_dir)s exists as a file.  This won't work with\n"
8281"b6, so I'm renaming it to %(mbox_dir)s.tmp and proceeding."
8282msgstr ""
8283
8284#: bin/update:255
8285msgid ""
8286"\n"
8287"%(listname)s has both public and private mbox archives.  Since this list\n"
8288"currently uses private archiving, I'm installing the private mbox archive\n"
8289"-- %(o_pri_mbox_file)s -- as the active archive, and renaming\n"
8290"        %(o_pub_mbox_file)s\n"
8291"to\n"
8292"        %(o_pub_mbox_file)s.preb6\n"
8293"\n"
8294"You can integrate that into the archives if you want by using the 'arch'\n"
8295"script.\n"
8296msgstr ""
8297
8298#: bin/update:270
8299msgid ""
8300"%s has both public and private mbox archives.  Since this list\n"
8301"currently uses public archiving, I'm installing the public mbox file\n"
8302"archive file (%s) as the active one, and renaming\n"
8303"        %s\n"
8304"    to\n"
8305"        %s.preb6\n"
8306"\n"
8307"You can integrate that into the archives if you want by using the 'arch'\n"
8308"script.\n"
8309msgstr ""
8310
8311#: bin/update:287
8312msgid "- updating old private mbox file"
8313msgstr ""
8314
8315#: bin/update:295
8316msgid ""
8317"    unknown file in the way, moving\n"
8318"        %(o_pri_mbox_file)s\n"
8319"    to\n"
8320"        %(newname)s"
8321msgstr ""
8322
8323#: bin/update:302 bin/update:325
8324msgid ""
8325"    looks like you have a really recent CVS installation...\n"
8326"    you're either one brave soul, or you already ran me"
8327msgstr ""
8328
8329#: bin/update:311
8330msgid "- updating old public mbox file"
8331msgstr ""
8332
8333#: bin/update:319
8334msgid ""
8335"    unknown file in the way, moving\n"
8336"        %(o_pub_mbox_file)s\n"
8337"    to\n"
8338"        %(newname)s"
8339msgstr ""
8340
8341#: bin/update:350
8342msgid "- This list looks like it might have <= b4 list templates around"
8343msgstr ""
8344
8345#: bin/update:358
8346msgid "- moved %(o_tmpl)s to %(n_tmpl)s"
8347msgstr ""
8348
8349#: bin/update:360
8350msgid "- both %(o_tmpl)s and %(n_tmpl)s exist, leaving untouched"
8351msgstr ""
8352
8353#: bin/update:363
8354msgid "- %(o_tmpl)s doesn't exist, leaving untouched"
8355msgstr ""
8356
8357#: bin/update:393
8358msgid "removing directory %(src)s and everything underneath"
8359msgstr ""
8360
8361#: bin/update:396
8362msgid "removing %(src)s"
8363msgstr ""
8364
8365#: bin/update:400
8366msgid "Warning: couldn't remove %(src)s -- %(rest)s"
8367msgstr ""
8368
8369#: bin/update:405
8370msgid "couldn't remove old file %(pyc)s -- %(rest)s"
8371msgstr ""
8372
8373#: bin/update:409
8374msgid "updating old qfiles"
8375msgstr ""
8376
8377#: bin/update:448
8378msgid "Warning!  Not a directory: %(dirpath)s"
8379msgstr ""
8380
8381#: bin/update:517
8382msgid "message is unparsable: %(filebase)s"
8383msgstr ""
8384
8385#: bin/update:531
8386msgid "Warning!  Deleting empty .pck file: %(pckfile)s"
8387msgstr ""
8388
8389#: bin/update:550
8390msgid "Updating Mailman 2.0 pending_subscriptions.db database"
8391msgstr ""
8392
8393#: bin/update:561
8394msgid "Updating Mailman 2.1.4 pending.pck database"
8395msgstr ""
8396
8397#: bin/update:585
8398msgid "Ignoring bad pended data: %(key)s: %(val)s"
8399msgstr ""
8400
8401#: bin/update:601
8402msgid "WARNING: Ignoring duplicate pending ID: %(id)s."
8403msgstr ""
8404
8405#: bin/update:654
8406msgid "getting rid of old source files"
8407msgstr ""
8408
8409#: bin/update:664
8410msgid "no lists == nothing to do, exiting"
8411msgstr ""
8412
8413#: bin/update:671
8414msgid ""
8415"fixing all the perms on your old html archives to work with b6\n"
8416"If your archives are big, this could take a minute or two..."
8417msgstr ""
8418
8419#: bin/update:676
8420msgid "done"
8421msgstr ""
8422
8423#: bin/update:678
8424msgid "Updating mailing list: %(listname)s"
8425msgstr ""
8426
8427#: bin/update:681
8428msgid "Updating Usenet watermarks"
8429msgstr ""
8430
8431#: bin/update:686
8432msgid "- nothing to update here"
8433msgstr ""
8434
8435#: bin/update:709
8436msgid "- usenet watermarks updated and gate_watermarks removed"
8437msgstr ""
8438
8439#: bin/update:723
8440msgid ""
8441"\n"
8442"\n"
8443"NOTE NOTE NOTE NOTE NOTE\n"
8444"\n"
8445"    You are upgrading an existing Mailman installation, but I can't tell "
8446"what\n"
8447"    version you were previously running.\n"
8448"\n"
8449"    If you are upgrading from Mailman 1.0b9 or earlier you will need to\n"
8450"    manually update your mailing lists.  For each mailing list you need to\n"
8451"    copy the file templates/options.html lists/<listname>/options.html.\n"
8452"\n"
8453"    However, if you have edited this file via the Web interface, you will "
8454"have\n"
8455"    to merge your changes into this file, otherwise you will lose your\n"
8456"    changes.\n"
8457"\n"
8458"NOTE NOTE NOTE NOTE NOTE\n"
8459"\n"
8460msgstr ""
8461
8462#: bin/update:780
8463msgid "No updates are necessary."
8464msgstr ""
8465
8466#: bin/update:783
8467msgid ""
8468"Downgrade detected, from version %(hexlversion)s to version %(hextversion)s\n"
8469"This is probably not safe.\n"
8470"Exiting."
8471msgstr ""
8472
8473#: bin/update:788
8474msgid "Upgrading from version %(hexlversion)s to %(hextversion)s"
8475msgstr ""
8476
8477#: bin/update:797
8478msgid ""
8479"\n"
8480"ERROR:\n"
8481"\n"
8482"The locks for some lists could not be acquired.  This means that either\n"
8483"Mailman was still active when you upgraded, or there were stale locks in "
8484"the\n"
8485"%(lockdir)s directory.\n"
8486"\n"
8487"You must put Mailman into a quiescent state and remove all stale locks, "
8488"then\n"
8489"re-run \"make update\" manually.  See the INSTALL and UPGRADE files for "
8490"details.\n"
8491msgstr ""
8492
8493#: bin/version:19
8494msgid "Print the Mailman version.\n"
8495msgstr ""
8496
8497#: bin/version:26
8498msgid "Using Mailman version:"
8499msgstr ""
8500
8501#: bin/withlist:19
8502msgid ""
8503"General framework for interacting with a mailing list object.\n"
8504"\n"
8505"There are two ways to use this script: interactively or programmatically.\n"
8506"Using it interactively allows you to play with, examine and modify a "
8507"MailList\n"
8508"object from Python's interactive interpreter.  When running interactively, "
8509"a\n"
8510"MailList object called `m' will be available in the global namespace.  It "
8511"also\n"
8512"loads the class MailList into the global namespace.\n"
8513"\n"
8514"Programmatically, you can write a function to operate on a MailList object,\n"
8515"and this script will take care of the housekeeping (see below for "
8516"examples).\n"
8517"In that case, the general usage syntax is:\n"
8518"\n"
8519"%% bin/withlist [options] listname [args ...]\n"
8520"\n"
8521"Options:\n"
8522"\n"
8523"    -l / --lock\n"
8524"        Lock the list when opening.  Normally the list is opened unlocked\n"
8525"        (e.g. for read-only operations).  You can always lock the file "
8526"after\n"
8527"        the fact by typing `m.Lock()'\n"
8528"\n"
8529"        Note that if you use this option, you should explicitly call m.Save"
8530"()\n"
8531"        before exiting, since the interpreter's clean up procedure will not\n"
8532"        automatically save changes to the MailList object (but it will "
8533"unlock\n"
8534"        the list).\n"
8535"\n"
8536"    -i / --interactive\n"
8537"        Leaves you at an interactive prompt after all other processing is\n"
8538"        complete.  This is the default unless the -r option is given.\n"
8539"\n"
8540"    --run [module.]callable\n"
8541"    -r [module.]callable\n"
8542"        This can be used to run a script with the opened MailList object.\n"
8543"        This works by attempting to import `module' (which must be in the\n"
8544"        directory containing withlist, or already be accessible on your\n"
8545"        sys.path), and then calling `callable' from the module.  callable "
8546"can\n"
8547"        be a class or function; it is called with the MailList object as "
8548"the\n"
8549"        first argument.  If additional args are given on the command line,\n"
8550"        they are passed as subsequent positional args to the callable.\n"
8551"\n"
8552"        Note that `module.' is optional; if it is omitted then a module "
8553"with\n"
8554"        the name `callable' will be imported.\n"
8555"\n"
8556"        The global variable `r' will be set to the results of this call.\n"
8557"\n"
8558"    --all / -a\n"
8559"        This option only works with the -r option.  Use this if you want to\n"
8560"        execute the script on all mailing lists.  When you use -a you "
8561"should\n"
8562"        not include a listname argument on the command line.  The variable "
8563"`r'\n"
8564"        will be a list of all the results.\n"
8565"\n"
8566"    --quiet / -q\n"
8567"        Suppress all status messages.\n"
8568"\n"
8569"    --help / -h\n"
8570"        Print this message and exit\n"
8571"\n"
8572"\n"
8573"Here's an example of how to use the -r option.  Say you have a file in the\n"
8574"Mailman installation directory called `listaddr.py', with the following\n"
8575"two functions:\n"
8576"\n"
8577"def listaddr(mlist):\n"
8578"    print mlist.GetListEmail()\n"
8579"\n"
8580"def requestaddr(mlist):\n"
8581"    print mlist.GetRequestEmail()\n"
8582"\n"
8583"Now, from the command line you can print the list's posting address by "
8584"running\n"
8585"the following from the command line:\n"
8586"\n"
8587"%% bin/withlist -r listaddr mylist\n"
8588"Loading list: mylist (unlocked)\n"
8589"Importing listaddr ...\n"
8590"Running listaddr.listaddr() ...\n"
8591"mylist@myhost.com\n"
8592"\n"
8593"And you can print the list's request address by running:\n"
8594"\n"
8595"%% bin/withlist -r listaddr.requestaddr mylist\n"
8596"Loading list: mylist (unlocked)\n"
8597"Importing listaddr ...\n"
8598"Running listaddr.requestaddr() ...\n"
8599"mylist-request@myhost.com\n"
8600"\n"
8601"As another example, say you wanted to change the password for a particular\n"
8602"user on a particular list.  You could put the following function in a file\n"
8603"called `changepw.py':\n"
8604"\n"
8605"from Mailman.Errors import NotAMemberError\n"
8606"\n"
8607"def changepw(mlist, addr, newpasswd):\n"
8608"    try:\n"
8609"        mlist.setMemberPassword(addr, newpasswd)\n"
8610"        mlist.Save()\n"
8611"    except NotAMemberError:\n"
8612"        print 'No address matched:', addr\n"
8613"\n"
8614"and run this from the command line:\n"
8615" %% bin/withlist -l -r changepw mylist somebody@somewhere.org foobar\n"
8616msgstr ""
8617
8618#: bin/withlist:163
8619msgid ""
8620"Unlock a locked list, but do not implicitly Save() it.\n"
8621"\n"
8622"    This does not get run if the interpreter exits because of a signal, or "
8623"if\n"
8624"    os._exit() is called.  It will get called if an exception occurs "
8625"though.\n"
8626"    "
8627msgstr ""
8628
8629#: bin/withlist:174
8630msgid "Unlocking (but not saving) list: %(listname)s"
8631msgstr ""
8632
8633#: bin/withlist:178
8634msgid "Finalizing"
8635msgstr ""
8636
8637#: bin/withlist:187
8638msgid "Loading list %(listname)s"
8639msgstr ""
8640
8641#: bin/withlist:189
8642msgid "(locked)"
8643msgstr ""
8644
8645#: bin/withlist:191
8646msgid "(unlocked)"
8647msgstr ""
8648
8649#: bin/withlist:196
8650msgid "Unknown list: %(listname)s"
8651msgstr ""
8652
8653#: bin/withlist:236
8654msgid "No list name supplied."
8655msgstr ""
8656
8657#: bin/withlist:245
8658msgid "--all requires --run"
8659msgstr ""
8660
8661#: bin/withlist:265
8662msgid "Importing %(module)s..."
8663msgstr ""
8664
8665#: bin/withlist:268
8666msgid "Running %(module)s.%(callable)s()..."
8667msgstr ""
8668
8669#: bin/withlist:289
8670msgid "The variable `m' is the %(listname)s MailList instance"
8671msgstr ""
8672
8673#: cron/bumpdigests:19
8674msgid ""
8675"Increment the digest volume number and reset the digest number to one.\n"
8676"\n"
8677"Usage: %(PROGRAM)s [options] [listname ...]\n"
8678"\n"
8679"Options:\n"
8680"\n"
8681"    --help/-h\n"
8682"        Print this message and exit.\n"
8683"\n"
8684"The lists named on the command line are bumped.  If no list names are "
8685"given,\n"
8686"all lists are bumped.\n"
8687msgstr ""
8688
8689#: cron/checkdbs:19
8690msgid ""
8691"Check for pending admin requests and mail the list owners if necessary.\n"
8692"\n"
8693"Usage: %(PROGRAM)s [options]\n"
8694"\n"
8695"Options:\n"
8696"\n"
8697"    -h/--help\n"
8698"        Print this message and exit.\n"
8699msgstr ""
8700
8701#: cron/checkdbs:107